（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| SAE J 2020 | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus | ||||
| SAE J 2020 | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus | ||||
| SAE J 2020 | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus | ||||
| SAE J 2020 | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus | ||||
| SAE J 1939/11 | Physical Layer, 250 Kbps, Twisted Shielded Pair | ||||
| SAE J 2020 | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent Uv and Condensation Apparatus | ||||
| SAE J 2642 | Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials | ||||
| SAE J 2012 | Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions | ||||
| SAE J 266 | Steady-State Directional Control Test Procedures For Passenger Cars and Light Trucks | ||||
| SAE J 2334 | Laboratory Cyclic Corrosion Test | ||||
| SAE J 266 | Steady-State Directional Control Test Procedures for Passenger Cars and Light Trucks | ||||
| SAE J 1752/1 | Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures - General and Definitions | ||||
| SAE J 1752/1 | Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures - General and Definitions | ||||
| SAE J 1752/1 | Electromagnetic Compatibility Measurement Procedures for Integrated Circuits-Integrated Circuit Emc Measurement Procedures-General and Definition | ||||
| SAE J 1383 | Performance Requirements for Replaceable Bulb Motor Vehicle Headlamps | ||||
| SAE J 1752/3 | Measurement of Radiated Emissions From Integrated Circuits-Tem/Wideband Tem (Gtem) Cell Method; Tem Cell (150 Khz to 1 Ghz), Wideband Tem Cell (150 Khz to 8 Ghz) | ||||
| SAE J 1756 | Determination of the Fogging Characteristics of Interior Automotive Materials | ||||
| SAE J 1752/3 | Measurement of Radiated Emissions from Integrated Circuits -- TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz) | ||||
| SAE J 1383 | Performance Requirements for Replacement Bulb Motor Vehicle Headlamps | ||||
| SAE J 1756 | Test Procedure to Determine the Fogging Characteristics of Interior Automotive Materials | ||||
| SAE J 1752/3 | Measurement of Radiated Emissions from Integrated Circuits -- TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz) | ||||
| SAE J 1545 | Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim | ||||
| SAE J 134 | Brake System Road Test Code--Passenger Car and Light Duty Truck-Trailer Combinations | ||||
| SAE J 134 | Brake System Road Test Code--Passenger Car and Light Duty Truck-Trailer Combinations | ||||
| SAE J 134 | Brake System Road Test Code--Passenger Car and Light Duty Truck-Trailer Combinations | ||||
| SAE J 1545 | Instrumental Color Difference Measurement for Exterior Finishes, Textiles, and Colored Trim | ||||
| SAE J 1939/71 | Vehicle Application Layer (Through February 2007) | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1545 | Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim | ||||
| SAE J 1939/71 | Vehicle Application Layer (Through May 2011) | ||||
| SAE J 1939/71 | Vehicle Application Layer (Through February 2008) | ||||
| SAE J 1939/71 | Vehicle Application Layer (Through February 2009) | ||||
| SAE J 2334 | Laboratory Cyclic Corrosion Test | ||||
| SAE J 1926/4 | Connector for Fluid Power and General Use - Ports and Stud End with ASME B1.1 Threads and O-Ring Seal - Part 4: External Hex and Internal Hex Inch Port Plugs - Dimensions, Design, Test Methods and Requirements | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1939/71 | Vehicle Application Layer (Through May 2011) | ||||
| SAE J 1939/71 | Vehicle Application Layer (Through May 2010) | ||||
| SAE J 1926/4 | Connector for Fluid Power and General Use - Ports and Stud End with ASME B1.1 Threads and O-Ring Seal - Part 4: External Hex and Internal Hex Inch Port Plugs - Dimensions, Design, Test Methods and Requirements | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1939/71 | Vehicle Application Layer -- J1939-71 (through 1999) | ||||
| SAE J 1044 | World Manufacturer Identifier | ||||
| SAE J 1508 | Hose Clamp Specifications | ||||
| SAE J 1939/71 | Vehicle Application Layer | ||||
| SAE J 1692 | Valve Seat Insert Information Report | ||||
| SAE J 409 | Product Analysis-Permissible Variations From Specified Chemical Analysis of a Heat Or Cast of Steel | ||||
| SAE J 409 | Product Analysis-Permissible Variations From Specified Chemical Analysis of a Heat Or Cast of Steel | ||||
| SAE J 409 | Product Analysis-Permissible Variations From Specified Chemical Analysis of a Heat Or Cast of Steel |
若您对上表中数据有任何疑问，请与网站联系。
