（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60331-25:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables | ||||
| IEC 60684-3-136:1997 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose | ||||
| IEC 60684-3-151:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose | ||||
| IEC 60684-3-145:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving | ||||
| IEC 60684-3-121:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving | ||||
| IEC 60674-3-7:1992 | Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation | ||||
| IEC 60672-2:1999 | Ceramic and glass insulating materials - Part 2: Methods of test | ||||
| IEC 60674-3-1:1998+AMD1:2011 CSV | Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors | ||||
| IEC 60667-1:1980 | Specification for vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements | ||||
| IEC 60667-3-1:1986 | Specification for vulcanized fibre for electrical purposes - Part 3-1: Specifications for individual materials - Flat sheets | ||||
| IEC 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials | ||||
| IEC TR 60648:1979 | Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation | ||||
| IEC 60641-3-2:2007 | Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 | ||||
| IEC TR 61364:1999/COR1:2000 | Corrigendum 1 - Nomenclature for hydroelectric powerplant machinery | ||||
| IEC 61063:1991 | Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery | ||||
| IEC 80416-3:2002+AMD1:2011 CSV | Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols | ||||
| IEC 60169-3:1965 | Radio-frequency connectors - Part 3: Two-pin connector for twin balanced aerial feeders | ||||
| IEC 61169-58:2016 | Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA) | ||||
| IEC 61169-39:2009 | Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors | ||||
| IEC 60761-2:2002 | Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols | ||||
| IEC 61967-1:2002 | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions | ||||
| IEC 61156-4-1:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification | ||||
| IEC 61156-4-2:2001 | Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification | ||||
| IEC 61156-3-2:2001 | Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring - Capability Approval - Sectional specification | ||||
| IEC 61156-3-1:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification | ||||
| IEC 61156-2-2:2001 | Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification | ||||
| IEC 61156-1:2007 | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification | ||||
| IEC 60979:1989 | Wires for wire wrapping applications | ||||
| IEC TR 60344:2007/COR1:2012 | Corrigendum 1 - Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide | ||||
| IEC 61196-11-1:2016 | Coaxial communication cables - Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric | ||||
| IEC 61196-10-1:2014 | Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric | ||||
| IEC 60747-4:2007 | Semiconductor devices - Discrete devices - Part 4: Microwave diodes and transistors | ||||
| IEC 60749-19:2003+AMD1:2010 CSV | Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength | ||||
| IEC 60749-12:2002 | Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency | ||||
| IEC 60401-1:2002 | Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities | ||||
| IEC 60635:1978 | Toroidal strip-wound cores made of magnetically soft material | ||||
| IEC 60966-3-1:2009 | Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | ||||
| IEC 60966-3:2008 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies | ||||
| IEC 60966-2-1:2008 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies | ||||
| IEC 61935-1:2015 | Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards | ||||
| IEC TS 62840-1:2016 | Electric vehicle battery swap system - Part 1: General and guidance | ||||
| ISO/IEC 29341-6-14:2008 | Information technology - UPnP Device Architecture - Part 6-14: Heating, Ventilation and Air Conditioning Device Control Protocol - Setpoint Schedule Service | ||||
| ISO/IEC 15938-9:2005/AMD1:2012 | Amendment 1 - Extensions to profiles and levels | ||||
| ISO/IEC 15954:1999 | Information technology -- Open Systems Interconnection -- Connection-mode protocol for the Application Service Object Association Control Service Element | ||||
| ISO/IEC 14776-323:2017 | Information technology - Small computer system interface (SCSI) - Part 323: SCSI Block Commands - 3 (SBC-3) | ||||
| ISO/IEC TR 13818-5:2005 | Information technology -- Generic coding of moving pictures and associated audio information -- Part 5: Software simulation | ||||
| ISO/IEC 13522-5:1997 | Information technology -- Coding of multimedia and hypermedia information -- Part 5: Support for base-level interactive applications | ||||
| IEC 60825-4:1997+AMD1:2002+AMD2:2003 CSV | Safety of laser products - Part 4: Laser guards | ||||
| IEC 60825-1:2007/COR1:2008 | Corrigendum 1 - Safety of laser products - Part 1: Equipment classification and requirements | ||||
| IEC 60730-2-9:1992/AMD2:1994 | Amendment 2 - Automatic electrical controls for household and similar use - Part 2: Particular requirements for temperature sensing controls |
若您对上表中数据有任何疑问，请与网站联系。
