（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 61753-382-2:2015 | Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment | ||||
| IEC 61753-381-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) | ||||
| IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz | ||||
| IEC 60079-13:2017 | Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" | ||||
| IEC 61857-21:1998 | Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose model - Wire-wound applications | ||||
| IEC 60243-3:2001 | Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests | ||||
| IEC 60216-1:1987 | Guide for the determination of thermal endurance properties of electrical insulating materials - Part 1: General guidelines for ageing procedures and evaluation of test results | ||||
| IEC 61747-3-1:1998 | Liquid crystal and solid-state display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification | ||||
| IEC 60664-3:2003 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution | ||||
| IEC 62448:2007 | Multimedia systems and equipment - Multimedia E-Publishing and E-Books - Generic format for E-Publishing | ||||
| IEC 61966-7-1:2001 | Multimedia systems and equipment - Colour measurement and management - Part 7-1: Colour printers - Reflective prints - RGB inputs | ||||
| IEC 60335-2-7:1979 | Safety of household and similar electrical appliances - Part 2: Particular requirements for washing machines | ||||
| IEC 60335-2-7:1984 | Safety of household and similar electrical appliances - Part 2: Particular requirements for washing machines | ||||
| IEC 60079-5:2007 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" | ||||
| IEC 61669:2001 | Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids | ||||
| IEC 60038:1983/AMD2:1997 | Amendment 2 - IEC standard voltages | ||||
| IEC 61082-1:1991/COR1:1993 | Corrigendum 1 - Preparation of documents used in electrotechnology - Part 1: General requirements | ||||
| IEC 60072-2:1960 | Recommendations for the dimensions and output ratings of electric motors - Part 2: Dimensions of mounting flanges for electric motors | ||||
| IEC 60335-1:2001/AMD1:2004/ISH1:2007 | Interpretation sheet 1 to amendment 1 - Household and similar electrical appliances - Safety - Part 1: General requirements | ||||
| IEC 62351-9:2017 | Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment | ||||
| IEC 60745-2-4:1983/AMD1:1992 | Amendment 1 - Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for sanders | ||||
| IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements | ||||
| IEC 61970-456:2013+AMD1:2015 CSV | Energy management system application program interface (EMS-API) -Part 456: Solved power system state profiles | ||||
| IEC 61076-4-102:1997 | Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917 | ||||
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance | ||||
| IEC 60246:1967 | Connecting wires having a rated voltage of 20 kV and 25 kV d.c. anda maximum working temperature of 105 °C for use in televisionreceivers | ||||
| IEC 60626-3:2008+AMD1:2012 CSV | Combined flexible materials for electrical insulation - Part 3:Specifications for individual materials | ||||
| IEC 62056-5-3:2017 PRV | Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer | ||||
| IEC 61192-3:2002 | Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies | ||||
| IEC 60534-4:2006 | Industrial-process control valves - Part 4: Inspection and routine testing | ||||
| IEC 61070:1991 | Compliance test procedures for steady-state availability | ||||
| IEC 60605-6:2007 | Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity | ||||
| IEC TS 62056-6-9:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 6-9: Mapping between the Common Information Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols | ||||
| ISO/IEC 23000-4:2009/AMD1:2009 | Amendment 1 - Information technology -- Multimedia application format (MPEG-A) -- Part 4: Musical slide show application format - Conformance and reference software for musical slide show application format | ||||
| IEC 60601-2-52:2009/COR1:2010 | Corrigendum 1 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds | ||||
| IEC TR 61200-704:1996 | Electrical installation guide - Part 704: Construction and demolition site installations | ||||
| IEC 60381-2:1978 | Analogue signals for process control systems. Part 2: Direct voltage signals | ||||
| IEC 60335-2-85:2002 | Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers | ||||
| IEC 62351-3:2014 | Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP | ||||
| IEC 61970-552:2016 | Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format | ||||
| IEC 61970-501:2006 | Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema | ||||
| IEC 60870-5-103:1997 | Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment | ||||
| IEC 60870-4:1990 | Telecontrol equipment and systems. Part 4: Performance requirements | ||||
| IEC 61196-1-200:2014 | Coaxial communication cables - Part 1-200: Environmental test methods - General requirements | ||||
| IEC 60061-3:1969/AMD32:2003 | Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 62031:2008+AMD1:2012+AMD2:2014 CSV | LED modules for general lighting - Safety specifications | ||||
| IEC 61195:1999+AMD1:2012+AMD2:2014 CSV | Double-capped fluorescent lamps - Safety specifications | ||||
| IEC 60554-1:1977/AMD1:1983 | Amendment 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements | ||||
| IEC 60455-3-3:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds | ||||
| IEC 62497-1:2010/AMD1:2013 | Amendment 1 - Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
若您对上表中数据有任何疑问，请与网站联系。
