（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 61000-4-11:2004/ISH1:2010 | Interpretation Sheet 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | ||||
| IEC 61000-3-3:2013 | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection | ||||
| IEC 60730-2-8:2000+AMD1:2002 CSV | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | ||||
| IEC 60825-2:2004 | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) | ||||
| IEC 60851-5:1985/AMD1:1988 | Amendment 1 - Methods of test for winding wires - Part 5: Electrical properties | ||||
| IEC TR 62971:2015 | Radiation instrumentation - Radiation sources used in illicit trafficking detection standards - Guidance and recommendations | ||||
| IEC 61196-4-1:2016 | Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables | ||||
| IEC 61156-7-1:2003 | Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Blank detail specification for digital and analog communication cables | ||||
| IEC 62153-4-16:2016 | Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up | ||||
| IEC 61196-1-1:2007 | Coaxial communication cables - Part 1-1: Capability approval for coaxial cables | ||||
| IEC 60966-2-4:2016 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors | ||||
| IEC 60772:1983 | Electrical penetration assemblies in containment structures for nuclear power generating stations | ||||
| IEC 60560:1977 | Definitions and terminology of brush-holders for electrical machines | ||||
| IEC 60851-5:1996/AMD2:2004 | Amendment 2 - Winding wires - Test methods - Part 5 : Electrical properties | ||||
| ISO/IEC 23008-5:2015 | Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 5: Reference software for high efficiency video coding | ||||
| ISO/IEC 15444-5:2003/AMD2:2015 | Amendment 2 - Information technology -- JPEG 2000 image coding system: Reference software | ||||
| ISO/IEC 13818-2/AMD2:2007 | Amendment 2 - Information technology -- Generic coding of moving pictures and associated audio information: Video - Support for colour spaces | ||||
| IEC TS 60034-32:2016 | Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings | ||||
| IEC TS 61201:2007 | Use of conventional touch voltage limits - Application guide | ||||
| IEC TR 60870-6-505:2002 | Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User guide | ||||
| IEC 60965:2016 | Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room | ||||
| IEC 60851-3:1985/AMD1:1988 | Amendment 1 - Methods of test for winding wires - Part 3: Mechanical properties | ||||
| IEC 60851-2:1985/AMD1:1992 | Amendment 1 - Methods of test for winding wires. Part 2: Determination of dimensions. | ||||
| IEC 60268-1:1985 | Sound system equipment. Part 1: General | ||||
| ISO/IEC 13346-5:1995 | Information technology -- Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange -- Part 5: Record structure | ||||
| IEC 61753-101-3:2006 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment | ||||
| IEC 61753-084-2:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment | ||||
| IEC TS 62789:2014 | Photovoltaic concentrator cell documentation | ||||
| IEC 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment | ||||
| IEC 60767:1983 | Helical-scan video-tape cassette system using 12.65 mm (0.5 in) magnetic tape on type beta-format | ||||
| IEC 61753-042-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments | ||||
| IEC 60728-11:2016/COR1:2016 | Corrigendum 1 - Cable networks for television signals, sound signals and interactive services - Part 11: Safety | ||||
| IEC 61249-5-1:1995 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) | ||||
| IEC 60851-2:1996/AMD1:1997 | Amendment 1 - Methods of test for winding wires - Part 2: Determination of dimensions | ||||
| IEC 61753-031-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1 × N and 2 × N non-wavelength-selective branching devices for Category C - Controlled environment | ||||
| IEC 61249-4-15:2009 | Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly | ||||
| IEC 60728-7-1:2003/AMD1:2015 | Amendment 1 - Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring - Physical (PHY) Layer Specification | ||||
| IEC 61300-3-50:2013/COR2:2015 | Corrigendum 2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches | ||||
| IEC 61249-3-4:1999 | Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film | ||||
| IEC 60712:1993/AMD1:1993 | Amendment 1 - Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format | ||||
| IEC 61249-2-33:2009 | Materials for printed boards and other interconnecting structures - Part 2-33: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad | ||||
| IEC 61300-3-25:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed | ||||
| IEC 61249-2-4:2001 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad | ||||
| IEC 60107-5:1992 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system | ||||
| IEC 62788-1-2:2016 | Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials | ||||
| IEC TS 62782:2016 | Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing | ||||
| IEC TR 61292-2:2003 | Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer | ||||
| IEC 61028:1990/AMD2:1997 | Amendment 2 - Electrical measuring instruments - X-Y recorders | ||||
| IEC 61028:1990/AMD1:1995 | Amendment 1 - Electrical measuring instruments - X-Y recorders | ||||
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
若您对上表中数据有任何疑问，请与网站联系。
