(清空日期可显示全部记录)
标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
---|---|---|---|---|---|
IEC 61853-2:2016 | Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements | ||||
IEC 61229:1993/AMD2:2002 | Amendment 2 - Rigid protective covers for live working on a.c. installations | ||||
IEC 61000-4-9:2016 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test | ||||
IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) | ||||
IEC 60529:1989+AMD1:1999 CSV | Degrees of protection provided by enclosures (IP Code) | ||||
IEC 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) | ||||
IEC 61156-10:2016 | Multicore and symmetrical pair/quad cables for digital communications - Part 10: Cables for cords with transmission characteristics up to 2 GHz - Sectional specification | ||||
IEC 60803:1984/AMD1:1995 | Amendment 1 - Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors | ||||
IEC 60749-31:2002/COR1:2003 | Corrigendum 1 - Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced) | ||||
IEC 61156-8:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification | ||||
IEC 61156-7-2:2003 | Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Capability Approval - Sectional specification for digital and analog communication cables | ||||
IEC 60457-1:1974 | Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods | ||||
IEC 62153-4-10:2015 | Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method | ||||
IEC 60154-4:2017 | Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides | ||||
IEC 60153-1:2016 | Hollow metallic waveguides - Part 1: General requirements and measuring methods | ||||
IEC 60394-3-2:1988 | Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Glass-fabric based varnished fabrics with epoxy, polyuréthane, silicone, polyester, bituminous or oleoresinous varnish | ||||
IEC 60371-3-4:1992 | Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder | ||||
IEC 60227-4:1992/AMD1:1997 | Amendment 1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring | ||||
IEC 60960:1988 | Functional design criteria for a safety parameter display system for nuclear power stations | ||||
IEC/IEEE 60780-323:2016 | Nuclear facilities - Electrical equipment important to safety - Qualification | ||||
IEC 60880:2006 | Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions | ||||
IEC 60744:1983 | Safety logic assemblies of nuclear power plants - Characteristics and test methods | ||||
IEC 60068-2-57:1989 | Environmental testing. Part 2: Tests. Test Ff: Vibration - Time history method | ||||
IEC 60671:2007 | Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing | ||||
IEC 60437:1997 | Radio interference test on high-voltage insulators | ||||
IEC 62372:2006 | Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic resolution | ||||
IEC 61452:1995 | Nuclear instrumentation - Measurement of gamma-ray emission rates of radionuclides - Calibration and use of germanium spectrometers | ||||
IEC 61052:1991 | IEC 1052 FASTBUS standard routines. Standard routines for use with FASTBUS data acquisition system | ||||
IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | ||||
IEC 60269-3:2010/AMD1:2013 | Amendment 1 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F | ||||
IEC 61009-1:2010/AMD2:2013 | Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules | ||||
IEC 61534-1:2011+AMD1:2014 CSV | Powertrack systems - Part 1: General requirements | ||||
IEC 60079-10-2:2015 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres | ||||
IEC 62620:2014 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications | ||||
IEC TR 60919-3:2009/AMD1:2016 | Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions | ||||
IEC 61643-21:2000/COR1:2001 | Corrigendum 1 - Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods | ||||
IEC 62271-102:2001/COR3:2005 | Corrigendum 3 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | ||||
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional | ||||
IEC 61184:2008+AMD1:2011 CSV | Bayonet lampholders | ||||
IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies | ||||
IEC 60793-2:1992 | Optical fibres - Part 2: Product specifications | ||||
IEC 60793-2-50:2004 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres | ||||
IEC 60793-2-20:2007 | Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres | ||||
IEC 60793-1-1:1995 | Optical fibres - Part 1: Generic specification - Section 1: General | ||||
IEC 61557-9:2009 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems | ||||
IEC 60335-2-49:1988/AMD1:1990 | Amendment 1 - Safety of household and similar electrical appliances - Part 2-49: Particular requirements for commercial electric hot cupboards | ||||
IEC 60317-55:2007 | Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 | ||||
IEC 60317-53:1999 | Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 | ||||
IEC 60317-51:2001 | Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 | ||||
IEC 60317-38:1992 | Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer |
若您对上表中数据有任何疑问,请与网站联系。