（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60104:1958 | Recommendation for an international specification for aluminium alloy conductor wire of the aluminium-magnesium-silicon type | ||||
| IEC 61196-1-115:2006 | Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss) | ||||
| IEC 60061-3N:1994 | Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | ||||
| IEC 60464-3-2:2001/AMD1:2006 | Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes | ||||
| IEC 60554-1:1977/COR1:1979 | Corrigendum 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements | ||||
| IEC 60193:1965 | International code for model acceptance tests of hydraulic turbines | ||||
| IEC 60370:1971 | Test procedure for thermal endurance of insulating varnishes - Electric strength method | ||||
| IEC 61163-2:1998 | Reliability stress screening - Part 2: Electronic components | ||||
| IEC 62435-2:2017 | Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms | ||||
| IEC 62374:2007 | Semiconductor devices - Time dependent dielectric breakdown (TDDB) test for gate dielectric films | ||||
| IEC 61109:1992 | Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria | ||||
| IEC 61109:1992/AMD1:1995 | Amendment 1 - Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria | ||||
| IEC 60660:1979 | Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV | ||||
| IEC 60433:1973 | Characteristics of string insulator units of the long rod type | ||||
| IEC 60168:1979/AMD1:1982 | Amendment 1 - Test on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V | ||||
| IEC 60086-4:1996 | Primary batteries - Part 4: Safety standard for lithium batteries | ||||
| IEC 61336:1996 | Nuclear instrumentation - Thickness measurement systems utilizingionizing radiation - Definitions and test methods | ||||
| IEC 60670-23:2006+AMD1:2016 CSV | Boxes and enclosures for electrical accessories for household andsimilar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures | ||||
| IEC 60674-3-3:1992 | Specification for plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Requirements forpolycarbonate (PC) films used for electrical insulation | ||||
| IEC 60404-3:1992/AMD2:2009/COR1:2009 | Corrigendum 1 - Amendment 2 - Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester | ||||
| IEC 60404-3:1992/AMD2:2009 | Amendment 2 - Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester | ||||
| IEC 62541-8:2015 | OPC Unified Architecture - Part 8: Data Access | ||||
| IEC 61097-1:1992 | Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results | ||||
| IEC 62453-303-2:2009/AMD1:2016 | Amendment 1 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | ||||
| IEC TR 62453-61:2009 | Field device tool interface specification - Device Type Manager (DTM) Styleguide for common object model | ||||
| IEC 62264-5:2016 | Enterprise-control system integration - Part 5: Business to manufacturing transactions | ||||
| IEC 60404-15:2012/AMD1:2016 | Amendment 1 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials | ||||
| IEC 60404-4:1995+AMD1:2000 CSV | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials | ||||
| IEC 60945:1994 | Marine navigational equipment - General requirements - Methods of testing and required test results. | ||||
| IEC 61709:2017 | Electric components - Reliability - Reference conditions for failure rates and stress models for conversion | ||||
| IEC 61650:1997 | Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities | ||||
| IEC 60706-5:2007 | Maintainability of equipment - Part 5: Testability and diagnostic testing | ||||
| IEC 61029-2-5:1993 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for band saws | ||||
| IEC 62056-46:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol | ||||
| IEC 61023:1990 | Marine speed and distance measuring equipment (SDME). Operational and performance requirements - Methods of testing and required test results | ||||
| IEC 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange | ||||
| IEC 62056-7-5:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN) | ||||
| IEC 60105:1958 | Recommendation for commercial-purity aluminium busbar material | ||||
| ISO/IEC 23003-2:2010/AMD1:2015 | Amendment 1 - Information technology -- MPEG audio technologies -- Part 2: Spatial Audio Object Coding (SAOC) - SAOC conformance | ||||
| IEC 62952-1:2016 | Power sources for a wireless communication device - Part 1: General requirements of power modules | ||||
| IEC 61262-3:1994 | Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity | ||||
| IEC 60870-6-701:1998 | Telecontrol equipment and systems - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems | ||||
| IEC 60870-5-4:1993 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 4: Definition and coding of application information elements | ||||
| IEC TR 60663:1980 | Planning of (single-sideband) power line carrier systems | ||||
| ISO/IEC 30134-3:2016 | Information technology - Data centres - Key performance indicators - Part 3: Renewable energy factor (REF) | ||||
| ISO/IEC 10164-17:1996/COR1:1999 | Corrigendum 1 - Information technology -- Open Systems Interconnection -- Systems Management: Change over function - | ||||
| IEC 60151-0:1966 | Measurements of the electrical properties of electronic tubes and valves - Part 0: Precautions relating to methods of measurement of electronic tubes and valves | ||||
| IEC 60191-2:1966/AMD12:2006 | Amendment 12 - Mechanical standardization of semiconductor devices - Part 2: Dimensions | ||||
| IEC 60745-2-4:2002 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type | ||||
| IEC 60851-3:2009+AMD1:2013 CSV | Winding wires - Test methods - Part 3: Mechanical properties |
若您对上表中数据有任何疑问，请与网站联系。
