（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 16063-43:2015 | Methods for the calibration of vibration and shock transducers -- Part 43: Calibration of accelerometers by model-based parameter identification | ||||
| ISO/IEC 14496-3:2005/Amd 3:2006 | Scalable Lossless Coding (SLS) | ||||
| ISO 6405-2:1993/Amd 1:1997 | |||||
| ISO 16063-42:2014 | Methods for the calibration of vibration and shock transducers -- Part 42: Calibration of seismometers with high accuracy using acceleration of gravity | ||||
| ISO 16587:2004 | Mechanical vibration and shock -- Performance parameters for condition monitoring of structures | ||||
| ISO 18129:2015 | Condition monitoring and diagnostics of machines -- Approaches for performance diagnosis | ||||
| ISO 16063-45:2017 | Methods for the calibration of vibration and shock transducers -- Part 45: In-situ calibration of transducers with built in calibration coil | ||||
| ISO 17359:2011 | Condition monitoring and diagnostics of machines -- General guidelines | ||||
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers | ||||
| ISO 18431-1:2005 | Mechanical vibration and shock -- Signal processing -- Part 1: General introduction | ||||
| ISO 18312-2:2012 | Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 2: Indirect method | ||||
| ISO 18431-3:2014 | Mechanical vibration and shock -- Signal processing -- Part 3: Methods of time-frequency analysis | ||||
| ISO 18431-4:2007 | Mechanical vibration and shock -- Signal processing -- Part 4: Shock-response spectrum analysis | ||||
| ISO 18436-1:2004 | Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 1: Requirements for certifying bodies and the certification process | ||||
| ISO 18436-2:2003 | Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics | ||||
| ISO/IEC 14496-2:2004/Cor 1:2004 | |||||
| ISO/R 117:1959 | Withdrawal of ISO/R 117-1959 | ||||
| ISO 18436-2:2014 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring and diagnostics | ||||
| ISO 18436-3:2012 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 3: Requirements for training bodies and the training process | ||||
| ISO 18436-4:2014 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis | ||||
| ISO 18436-4:2008 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis | ||||
| ISO 18436-6:2014 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission | ||||
| ISO 7212:1986 | Enclosures for protection against ionizing radiation -- Lead shielding units for 50 mm and 100 mm thick walls | ||||
| ISO 18436-6:2008 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission | ||||
| ISO 18436-8:2013 | Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 8: Ultrasound | ||||
| ISO 18437-1:2012 | Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 1: Principles and guidelines | ||||
| ISO 10138:1991 | Steel and iron -- Determination of chromium content -- Flame atomic absorption spectrometric method | ||||
| ISO 18437-2:2005 | Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 2: Resonance method | ||||
| ISO 18437-3:2005 | Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 3: Cantilever shear beam method | ||||
| ISO 18437-5:2011 | Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 5: Poisson ratio based on comparison between measurements and finite element analysis | ||||
| ISO/TR 19201:2013 | Mechanical vibration -- Methodology for selecting appropriate machinery vibration standards | ||||
| ISO 4206:1977 | Counterbores with parallel shanks and solid pilots | ||||
| ISO 20283-5:2016 | Mechanical vibration -- Measurement of vibration on ships -- Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships | ||||
| ISO 7503-2:1988 | Evaluation of surface contamination -- Part 2: Tritium surface contamination | ||||
| ISO 20816-1:2016 | Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 1: General guidelines | ||||
| ISO/DIS 20816-5 | Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 5: Machine sets in hydraulic power generating and pump-storage plants | ||||
| ISO 22096:2007 | Condition monitoring and diagnostics of machines -- Acoustic emission | ||||
| ISO 22266-1:2009 | Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW | ||||
| ISO/DIS 29821 | Condition monitoring and diagnostics of machines -- Ultrasound -- General guidelines, procedures and validation | ||||
| ISO 10720:1997 | Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas | ||||
| ISO 8655-5:2002 | Piston-operated volumetric apparatus -- Part 5: Dispensers | ||||
| ISO 4126-9:2008 | Safety devices for protection against excessive pressure -- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices | ||||
| ISO 2889:2010 | Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities | ||||
| ISO 3925:2014 | Unsealed radioactive substances -- Identification and documentation | ||||
| ISO/TR 4826:1979 | Sealed radioactive sources -- Leak test methods | ||||
| ISO 6961:1982 | Long-term leach testing of solidified radioactive waste forms | ||||
| ISO 6962:2004 | Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste | ||||
| ISO 7503-2:2016 | Measurement of radioactivity - Measurement and evaluation of surface contamination -- Part 2: Test method using wipe-test samples | ||||
| ISO 7503-1:2016 | Measurement of radioactivity -- Measurement and evaluation of surface contamination -- Part 1: General principles | ||||
| ISO 7503-3:1996 | Evaluation of surface contamination -- Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (E bêtamax less than 0,15 MeV) |
若您对上表中数据有任何疑问，请与网站联系。
