（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 11563:2003 | Crude petroleum and petroleum products -- Bulk cargo transfer -- Guidelines for achieving the fullness of pipelines | ||||
| ISO 12917-1:2017 | Petroleum and liquid petroleum products -- Calibration of horizontal cylindrical tanks -- Part 1: Manual methods | ||||
| ISO 7982-1:1998/Cor 1:1999 | . | ||||
| ISO 15169:2003 | Petroleum and liquid petroleum products -- Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems | ||||
| ISO 18132-1:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- General requirements for automatic tank gauges -- Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage | ||||
| ISO 140-3:1995 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 3: Laboratory measurements of airborne sound insulation of building elements | ||||
| ISO 8385:1999 | Ships and marine technology -- Dredgers -- Classification | ||||
| ISO 29945:2016 | Refrigerated non-petroleum based liquefied gaseous fuels -- Dimethylether (DME) -- Method of manual sampling onshore terminals | ||||
| ISO 9905:1994/Amd 1:2011 | |||||
| ISO 18132-3:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- General requirements for automatic tank gauges -- Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage | ||||
| ISO 140-1:1978 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratories | ||||
| ISO 140-1:1997 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratory test facilities with suppressed flanking transmission | ||||
| ISO 140-1:1997/Amd 1:2004 | Specific requirements on the frame of the test opening for lightweight twin leaf partitions | ||||
| ISO 140-2:1978 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 2: Statement of precision requirements | ||||
| ISO 140-2:1991 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 2: Determination, verification and application of precision data | ||||
| ISO 3004-1:1986 | Light gauge metal containers -- Capacities and related cross-sections -- Part 1: Open-top cans for general food | ||||
| ISO 140-9:1985 | Acoustics -- Measurements of sound insulation in buildings and of building elements -- Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it | ||||
| ISO 140-12:2000 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor | ||||
| ISO 354:2003 | Acoustics -- Measurement of sound absorption in a reverberation room | ||||
| ISO 717-1:1996 | Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation | ||||
| ISO 717-2:1982 | Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation | ||||
| ISO 717-2:1996 | Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation | ||||
| ISO 717-3:1982 | Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 3: Airborne sound insulation of facade elements and facades | ||||
| ISO 3382-1:2009 | Acoustics -- Measurement of room acoustic parameters -- Part 1: Performance spaces | ||||
| ISO 5136:1990 | Acoustics -- Determination of sound power radiated into a duct by fans -- In-duct method | ||||
| ISO 15186-3:2002 | Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 3: Laboratory measurements at low frequencies | ||||
| ISO 15186-2:2003 | Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 2: Field measurements | ||||
| ISO 15665:2003 | Acoustics -- Acoustic insulation for pipes, valves and flanges | ||||
| ISO 16283-1:2014 | Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation | ||||
| ISO 15712-3:2005 | Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 3: Airborne sound insulation against outdoor sound | ||||
| ISO 15712-2:2005 | Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 2: Impact sound insulation between rooms | ||||
| ISO 15712-4:2005 | Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 4: Transmission of indoor sound to the outside | ||||
| ISO 16032:2004 | Acoustics -- Measurement of sound pressure level from service equipment in buildings -- Engineering method | ||||
| ISO 3785:1976 | Steel -- Designation of test piece axes | ||||
| ISO 16251-1:2014 | Acoustics -- Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up -- Part 1: Heavyweight compact floor | ||||
| ISO 17497-2:2012 | Acoustics -- Sound-scattering properties of surfaces -- Part 2: Measurement of the directional diffusion coefficient in a free field | ||||
| ISO 18233:2006 | Acoustics -- Application of new measurement methods in building and room acoustics | ||||
| ISO/CD 20189-1 | Acoustics -- Screens furniture and single objects intended for interior use -- Part 1: Rating of sound absorption and sound reduction of elements based on laboratory measurements | ||||
| ISO 148-1:2006 | Metallic materials -- Charpy pendulum impact test -- Part 1: Test method | ||||
| ISO 148-2:1998 | Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of test machines | ||||
| ISO/DIS 4545-3 | Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks | ||||
| ISO 148-2:2008 | Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines | ||||
| ISO 148-3:2016 | Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines | ||||
| ISO/R 955:1969 | Flattening test on aluminium and aluminium alloy tubes | ||||
| ISO/R 957:1969 | Simple torsion test for aluminium and aluminium alloy wire | ||||
| ISO/R 958:1969 | Wrapping test for aluminium and aluminium alloy wire | ||||
| ISO 3327:1982 | Hardmetals -- Determination of transverse rupture strength | ||||
| ISO 3327:2009 | Hardmetals -- Determination of transverse rupture strength | ||||
| ISO 3738-2:1988 | Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks | ||||
| ISO 34:1979 | Rubber, vulcanized -- Determination of tear strength (trouser, angle and crescent test pieces) |
若您对上表中数据有任何疑问，请与网站联系。
