（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 6101-3:1997 | Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content | ||||
| ISO 7784-2:1997 | Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method | ||||
| ISO 8130-5:1992 | Coating powders -- Part 5: Determination of flow properties of a powder/air mixture | ||||
| ISO 8130-6:1992 | Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature | ||||
| ISO 8130-7:1992 | Coating powders -- Part 7: Determination of loss of mass on stoving | ||||
| ISO/NP 8130-12 | Coating powders -- Part 12: Determination of compatibility | ||||
| ISO 8130-14:2004 | Coating powders -- Part 14: Terminology | ||||
| ISO/TR 9038:1991 | Paints and varnishes -- Determination of the ability of liquid paints to sustain combustion | ||||
| ISO 9117-6:2012 | Paints and varnishes -- Drying tests -- Part 6: Print-free test | ||||
| ISO 13803:2014 | Paints and varnishes -- Determination of haze on paint films at 20 degrees | ||||
| ISO 11341:1994 | Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation | ||||
| ISO 11890-1:2007 | Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method | ||||
| ISO 11890-2:2013 | Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method | ||||
| ISO 12013-2:2012 | Paints and varnishes -- Determination of curing characteristics using a free damped oscillation method -- Part 2: Glass transition temperature | ||||
| ISO 12137-1:1997 | Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus | ||||
| ISO 12137:2011 | Paints and varnishes -- Determination of mar resistance | ||||
| ISO 12137-2:1997 | Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus | ||||
| ISO 13129:2012 | Paints and varnishes -- Electrochemical measurement of the protection provided to steel by paint coatings -- Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements | ||||
| ISO 15110:2013 | Paints and varnishes -- Artificial weathering including acidic deposition | ||||
| ISO 15181-1:2000 | Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides | ||||
| ISO 15181-1:2007 | Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides | ||||
| ISO 15181-2:2007 | Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate | ||||
| ISO 6361-3:2011 | Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 3: Strips: Tolerances on shape and dimensions | ||||
| ISO/FDIS 7743 | Rubber, vulcanized or thermoplastic -- Determination of compression stress-strain properties | ||||
| ISO 15181-4:2008 | Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate | ||||
| ISO 15181-5:2008 | Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract | ||||
| ISO 15181-6:2012 | Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract | ||||
| ISO 15711:2003 | Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water | ||||
| ISO 16053:2010 | Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test | ||||
| ISO 12900:1997 | Hard coal - Determination of abrasiveness | ||||
| ISO/TS 13605:2012 | Solid mineral fuels -- Major and minor elements in hard coal ash and coke ash -- Wavelength dispersive X-ray fluorescence spectrometric method | ||||
| ISO 540:1995 | Solid mineral fuels -- Determination of fusibility of ash -- High-temperature tube method | ||||
| ISO 579:2013 | Coke -- Determination of total moisture | ||||
| ISO 587:1997 | Solid mineral fuels -- Determination of chlorine using Eschka mixture | ||||
| ISO 601:1981 | Solid mineral fuels -- Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 | ||||
| ISO 622:2016 | Solid mineral fuels -- Determination of phosphorus content -- Reduced molybdophosphate photometric method | ||||
| ISO 15926-1:2004 | Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 1: Overview and fundamental principles | ||||
| ISO 3675:1976 | Crude petroleum and liquid petroleum products -- Laboratory determination of density or relative density -- Hydrometer method | ||||
| ISO/TS 15926-3:2009 | Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 3: Reference data for geometry and topology | ||||
| ISO 426-2:1983 | Wrought copper-zinc alloys -- Chemical composition and forms of wrought products -- Part 2: Leaded copper-zinc alloys | ||||
| ISO 6976:1995 | Natural gas -- Calculation of calorific values, density, relative density and Wobbe index from composition | ||||
| ISO 6977:1983 | Natural gas -- Determination of water and methanol contents -- Gas chromatographic method | ||||
| ISO 8943:2007 | Refrigerated light hydrocarbon fluids -- Sampling of liquefied natural gas -- Continuous and intermittent methods | ||||
| ISO 10723:2012 | Natural gas -- Performance evaluation for analytical systems | ||||
| ISO 12213-1:1997 | Natural gas -- Calculation of compression factor -- Part 1: Introduction and guidelines | ||||
| ISO 9724:1992 | Nickel and nickel alloy wire and drawing stock | ||||
| ISO 3675:1998 | Crude petroleum and liquid petroleum products -- Laboratory determination of density -- Hydrometer method | ||||
| ISO 12213-2:2006 | Natural gas -- Calculation of compression factor -- Part 2: Calculation using molar-composition analysis | ||||
| ISO 13734:1998 | Natural gas -- Organic sulfur compounds used as odorants -- Requirements and test methods | ||||
| ISO 12213-3:2006 | Natural gas -- Calculation of compression factor -- Part 3: Calculation using physical properties |
若您对上表中数据有任何疑问，请与网站联系。
