（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/TR 14749:2016 | Natural gas -- Online gas chromatograph for upstream area | ||||
| ISO 9725:1992 | Nickel and nickel alloy forgings | ||||
| ISO 3214:1974 | Oil of Litsea cubeba | ||||
| ISO 15403-1:2006 | Natural gas -- Natural gas for use as a compressed fuel for vehicles -- Part 1: Designation of the quality | ||||
| ISO 8159:1987 | Textiles -- Morphology of fibres and yarns -- Vocabulary | ||||
| ISO/TR 15403-2:2006 | Natural gas - Natural gas for use as a compressed fuel for vehicles -- Part 2: Specification of the quality | ||||
| ISO 18453:2004 | Natural gas -- Correlation between water content and water dew point | ||||
| ISO 19739:2004 | Natural gas -- Determination of sulfur compounds using gas chromatography | ||||
| ISO/TR 22302:2014 | Natural gas -- Calculation of methane number | ||||
| ISO 20765-2:2015 | Natural gas -- Calculation of thermodynamic properties -- Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application | ||||
| ISO 20765-1:2005 | Natural gas -- Calculation of thermodynamic properties -- Part 1: Gas phase properties for transmission and distribution applications | ||||
| ISO 3771:2011 | Petroleum products -- Determination of base number -- Perchloric acid potentiometric titration method | ||||
| ISO 23874:2006 | Natural gas -- Gas chromatographic requirements for hydrocarbon dewpoint calculation | ||||
| ISO/FDIS 2592 | Petroleum and related products -- Determination of flash and fire points -- Cleveland open cup method | ||||
| ISO 2719:1988 | Petroleum products and lubricants -- Determination of flash point -- Pensky-Martens closed cup method | ||||
| ISO 2719:2002 | Determination of flash point -- Pensky-Martens closed cup method | ||||
| ISO 2909:1981 | Petroleum products -- Calculation of viscosity index from kinematic viscosity | ||||
| ISO 2977:1974 | Petroleum products and hydrocarbon solvents -- Determination of aniline point and mixed aniline point | ||||
| ISO 2977:1989 | Petroleum products and hydrocarbon solvents -- Determination of aniline point and mixed aniline point | ||||
| ISO 3170:2004 | Petroleum liquids -- Manual sampling | ||||
| ISO 3838:1983 | Crude petroleum and liquid or solid petroleum products -- Determination of density or relative density -- Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods | ||||
| ISO 15597:2001 | Petroleum and related products -- Determination of chlorine and bromine content -- Wavelength-dispersive X-ray fluorescence spectrometry | ||||
| ISO/FDIS 11365 | Petroleum and related products -- Maintenance and use guide for triaryl phosphate ester turbine control fluids | ||||
| ISO 9046:1987 | Building construction -- Sealants -- Determination of adhesion/cohesion properties at constant temperature | ||||
| ISO 9047:2001 | Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants at variable temperatures | ||||
| ISO 10563:2005 | Building construction -- Sealants -- Determination of change in mass and volume | ||||
| ISO 11618:2015 | Buildings and Civil Engineering Works -- Sealants -- Classification and requirements for pedestrian walkway sealants | ||||
| ISO 11600:1993 | Building construction -- Sealants -- Classification and requirements | ||||
| ISO 13640:1999 | Building construction -- Jointing products -- Specifications for test substrates | ||||
| ISO 20795-1:2013 | Dentistry -- Base polymers -- Part 1: Denture base polymers | ||||
| ISO 1893:1989 | Refractory products -- Determination of refractoriness-under-load (differential - with rising temperature) | ||||
| ISO 1109:1975 | Refractory products -- Classification of dense shaped refractory products | ||||
| ISO 1893:2005 | Refractory products -- Determination of refractoriness-under-load -- Differential method with rising temperature | ||||
| ISO 1893:2007 | Refractory products -- Determination of refractoriness under load -- Differential method with rising temperature | ||||
| ISO 1927-1:2012 | Monolithic (unshaped) refractory products -- Part 1: Introduction and classification | ||||
| ISO 5014:1997 | Dense and insulating shaped refractory products -- Determination of modulus of rupture at ambient temperature | ||||
| ISO 126:1989 | Natural rubber latex concentrate -- Determination of dry rubber content | ||||
| ISO 1796:1982 | Rubber, raw -- Sample preparation | ||||
| ISO 2453:1991/Cor 1:2003 | |||||
| ISO 9028:2006 | Rubber -- Dissolution by acid digestion | ||||
| ISO 527-5:1997 | Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | ||||
| ISO 1172:1996 | Textile-glass-reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination methods | ||||
| ISO 1268-6:2002 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding | ||||
| ISO 593:1974 | Paper -- Untrimmed stock sizes for the ISO-A Series -- ISO supplementary range | ||||
| ISO/DIS 20494 | Paper -- Requirements for stability for general graphic applications | ||||
| ISO 7240-10:2007 | Fire detection and alarm systems -- Part 10: Point-type flame detectors | ||||
| ISO 7240-24:2010/Amd 1:2013 | |||||
| ISO/TS 7240-29 | Fire detection and alarm systems -- Part 29: Video fire detectors | ||||
| ISO 19452:2008/Cor 1:2008 | |||||
| ISO 1047:1973 | Withdrawal of ISO 1047-1973 |
若您对上表中数据有任何疑问，请与网站联系。
