（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 18118:2015 | Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials | ||||
| ISO 18337:2015 | Surface chemical analysis -- Surface characterization -- Measurement of the lateral resolution of a confocal fluorescence microscope | ||||
| ISO 18554:2016 | Surface chemical analysis -- Electron spectroscopies -- Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy | ||||
| ISO/TS 18507:2015 | Surface chemical analysis -- Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis | ||||
| ISO 18516:2006 | Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution | ||||
| ISO 19318:2004 | Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of methods used for charge control and charge correction | ||||
| ISO 20341:2003 | Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for estimating depth resolution parameters with multiple delta-layer reference materials | ||||
| ISO/DIS 20411 | Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry | ||||
| ISO 20903:2006 | Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Methods used to determine peak intensities and information required when reporting results | ||||
| ISO 23830:2008 | Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry | ||||
| ISO 24236:2005 | Surface chemical analysis -- Auger electron spectroscopy -- Repeatability and constancy of intensity scale | ||||
| ISO 24237:2005 | Surface chemical analysis -- X-ray photoelectron spectroscopy -- Repeatability and constancy of intensity scale | ||||
| ISO 965-1:2013 | ISO general purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data | ||||
| ISO 28600:2011 | Surface chemical analysis -- Data transfer format for scanning-probe microscopy | ||||
| ISO 6487:2002/Amd 1:2008 | . | ||||
| ISO 29081:2010 | Surface chemical analysis -- Auger electron spectroscopy -- Reporting of methods used for charge control and charge correction | ||||
| ISO 78-4:1983 | Layouts for standards -- Part 4: Standard for atomic absorption spectrometric analysis | ||||
| ISO 2211:1973 | Liquid chemical products -- Measurement of colour in Hazen units (platinum-cobalt scale) | ||||
| ISO 11938:2012 | Microbeam analysis -- Electron probe microanalysis -- Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy | ||||
| ISO 14594:2003 | Microbeam analysis -- Electron probe microanalysis -- Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy | ||||
| ISO 1482:2011 | Slotted countersunk (flat) head tapping screws | ||||
| ISO 16592:2006 | Microbeam analysis -- Electron probe microanalysis -- Guidelines for determining the carbon content of steels using a calibration curve method | ||||
| ISO/AWI 8820-6 | Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links | ||||
| ISO 16592:2012 | Microbeam analysis -- Electron probe microanalysis -- Guidelines for determining the carbon content of steels using a calibration curve method | ||||
| ISO 7270-1:2003/Amd 1:2010 | |||||
| ISO/DIS 19463 | Microbeam analysis -- Electron probe microanalyser (EPMA) -- Guidelines for performing quality assurance procedures | ||||
| ISO 25498:2010 | Microbeam analysis -- Analytical electron microscopy -- Selected-area electron diffraction analysis using a transmission electron microscope | ||||
| ISO 261:1998 | ISO general purpose metric screw threads -- General plan | ||||
| ISO 4287:1997/Amd 1:2009 | Peak count number | ||||
| ISO 262:1973 | ISO general purpose metric screw threads -- Selected sizes for screws, bolts and nuts | ||||
| ISO 228-2:1987 | Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges | ||||
| ISO 1891:1979 | Bolts, screws, nuts and accessories -- Terminology and nomenclature | ||||
| ISO 10683:2014 | Fasteners -- Non-electrolytically applied zinc flake coatings | ||||
| ISO 16047:2005 | Fasteners -- Torque/clamp force testing | ||||
| ISO 225:2010 | Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions | ||||
| ISO 225:1983 | Fasteners -- Bolts, screws, studs and nuts -- Symbols and designations of dimensions | ||||
| ISO 7830:1983 | Photography -- Safety photographic films other than motion picture films -- Material specifications | ||||
| ISO 885:1976 | General purpose bolts and screws -- Metric series -- Radii under the head | ||||
| ISO/PRF TS 80004-13 | Nanotechnologies -- Vocabulary -- Part 13: Graphene and other two dimensional materials | ||||
| ISO 888:2012 | Fasteners -- Bolts, screws and studs -- Nominal lengths and thread lengths | ||||
| ISO 898-1:2009 | Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread | ||||
| ISO 898-1:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs | ||||
| ISO 898-1:1988 | Mechanical properties of fasteners -- Part 1: Bolts, screws and studs | ||||
| ISO 898-1:2013/Cor 1:2013 | |||||
| ISO 898-5:1998 | Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses | ||||
| ISO 1207:1983 | Slotted cheese head screws -- Product grade A | ||||
| ISO/IEC PDTR 19583-21 | Information technology -- Concepts and usage of metadata -- Part 21: SQL Implementation for 11179-3 | ||||
| ISO 1482:1983 | Slotted countersunk (flat) head tapping screws (common head style) | ||||
| ISO 1481:1983 | Slotted pan head tapping screws | ||||
| ISO 4016:1999 | Hexagon head bolts -- Product grade C |
若您对上表中数据有任何疑问，请与网站联系。
