（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 2010:1994 | Countersunk slotted raised head screws (common head style) -- Product grade A | ||||
| ISO/CD 3506-1 | Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs with specified property classes - Coarse pitch thread and fine pitch thread | ||||
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress | ||||
| ISO 3506-4:2003 | Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 4: Tapping screws | ||||
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws | ||||
| ISO 4014:2011 | Hexagon head bolts -- Product grades A and B | ||||
| ISO 4015:1979 | Hexagon head bolts -- Product grade B -- Reduced shank (shank diameter approximately equal to pitch diameter) | ||||
| ISO 4016:1988 | Hexagon head bolts -- Product grade C | ||||
| ISO 4017:2011 | Hexagon head screws -- Product grades A and B | ||||
| ISO 4027:1993 | Hexagon socket set screws with cone point | ||||
| ISO 7045:1994 | Pan head screws with type H or type Z cross recess -- Product grade A | ||||
| ISO 7048:2011 | Cross-recessed cheese head screws | ||||
| ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws | ||||
| ISO 7721:1983 | Countersunk head screws -- Head configuration and gauging | ||||
| ISO 8992:2005 | Fasteners -- General requirements for bolts, screws, studs and nuts | ||||
| ISO/DIS 13918 | Welding -- Studs and ceramic ferrules for arc stud welding | ||||
| ISO 7042:1983 | Prevailing torque type all-metal hexagon nuts, style 2 -- Property classes 5, 8, 10 and 12 | ||||
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 -- Product grades A and B | ||||
| ISO 7413:1984 | Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) -- Product grades A and B -- Property classes 5, 6 and 8 | ||||
| ISO 7417:1984 | Hexagon nuts for structural bolting -- Style 2, hot-dip galvanized (oversize tapped) -- Product grade A -- Property class 9 | ||||
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts -- Property classes 5, 8 and 10 | ||||
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 -- Property class 9 | ||||
| ISO 8673:1988 | Hexagon nuts, style 1, with metric fine pitch thread -- Product grades A and B | ||||
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread -- Product grades A and B | ||||
| ISO/DIS 8675 | Hexagon thin nuts (style 0) chamfered, with fine pitch thread -- Product grades A and B | ||||
| ISO 10484:1997 | Widening test on nuts | ||||
| ISO/NP 10484 | Widening, crushing and cone proof load tests on nuts | ||||
| ISO 1167:1973 | Plastics pipes for the transport of fluids -- Determination of the resistance to internal pressure | ||||
| ISO 10485:1991 | Cone proof load test on nuts | ||||
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread -- Property classes 6, 8 and 10 | ||||
| ISO 10663:2012 | Hexagon nuts with flange, style 2 -- Fine pitch thread | ||||
| ISO 12125:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread -- Product grades A and B | ||||
| ISO 12126:1997 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread -- Product grades A and B | ||||
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 -- Product grades A and B | ||||
| ISO/DIS 12126 | Prevailing torque (all-metal) hexagon high nuts with flange, with fine pitch thread -- Product grades A and B | ||||
| ISO 6500:1980 | Powered industrial trucks -- Service brakes -- Component strength-performance requirements | ||||
| ISO 21670:2003 | Hexagon weld nuts with flange | ||||
| ISO 21670:2014 | Fasteners -- Hexagon weld nuts with flange | ||||
| ISO 15974:2000 | Closed end blind rivets with break pull mandrel and countersunk head -- AlA/St | ||||
| ISO 15975:2002 | Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA | ||||
| ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head -- AIA/St | ||||
| ISO 105-E06:1989/Cor 1:2002 | |||||
| ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head -- St/St | ||||
| ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head -- St/St | ||||
| ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head -- St/St | ||||
| ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA | ||||
| ISO/IEC DIS 21277 | Information technology -- Radio frequency identification device performance test methods -- Crypto suite | ||||
| ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head -- A2/A2 | ||||
| ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head -- A2/SSt | ||||
| ISO 16584:2002 | Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt |
若您对上表中数据有任何疑问，请与网站联系。
