（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 10939:1998/Cor 1:2000 | |||||
| ISO 11978 | Ophthalmic optics -- Contact lenses and contact lens care products -- Labelling | ||||
| ISO 11979-4:2008 | Ophthalmic implants -- Intraocular lenses -- Part 4: Labelling and information | ||||
| ISO 15798:2013/Amd 1:2017 | |||||
| ISO/CD 19979 | Ophthalmic optics -- Contact lenses -- Hygienic management of multipatient use trial contact lenses | ||||
| ISO 12858-1:1999 | Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 1: Invar levelling staffs | ||||
| ISO 2242:1972 | Photography -- Light sources for use in sensitometric exposure -- Simulation of the spectral distribution of photoflood illumination | ||||
| ISO 3272-3:1975 | Microcopying of technical drawings and other drawing office documents -- Part 3: Unitized 35 mm microfilm carriers | ||||
| ISO 12650:1999 | Document imaging applications -- Microfilming of achromatic maps on 35 mm microfilm | ||||
| ISO 12142:2001 | Electronic imaging -- Media error monitoring and reporting techniques for verification of stored data on optical digital data disks | ||||
| ISO/R 1713:1970 | Withdrawal of ISO/R 1713-1970 | ||||
| ISO 5130:2007/Amd 1:2012 | |||||
| ISO 6487:1987 | Road vehicles -- Measurement techniques in impact tests -- Instrumentation | ||||
| ISO 10844:2011 | Acoustics -- Specification of test tracks for measuring noise emitted by road vehicles and their tyres | ||||
| ISO 5775-1:1997 | Bicycle tyres and rims -- Part 1: Tyre designations and dimensions | ||||
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry -- Seat index point | ||||
| ISO 9112:2008 | Truck and bus tyres -- Methods of measuring tyre rolling circumference -- Loaded new tyres | ||||
| ISO 9948:1992 | Truck and bus tyres -- Methods of measuring rolling resistance | ||||
| ISO 10191:1993 | Passenger car tyres -- Verifying tyre capabilities -- Laboratory test methods | ||||
| ISO 18106:2016 | Passenger car, commercial vehicle, truck and bus tyres -- Methods for measuring snow grip performance -- Loaded new tyres | ||||
| ISO 7237:1993/Amd 1:2001 | |||||
| ISO/NP 7203-3 | Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids | ||||
| ISO 14520-2:2006 | Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 2: CF3I extinguishant | ||||
| ISO 14520-7:2000 | Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 7: HCFC 124 extinguishant | ||||
| ISO 14520-14:2000 | Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 14: IG-55 extinguishant | ||||
| ISO 6393:1998 | Acoustics -- Measurement of exterior noise emitted by earth-moving machinery -- Stationary test conditions | ||||
| ISO 6405-2:1993 | Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Specific symbols for machines, equipment and accessories | ||||
| ISO 7136:2006 | Earth-moving machinery -- Pipelayers -- Terminology and commercial specifications | ||||
| ISO 7457:1983 | Earth-moving machinery -- Measurement of turning dimensions of wheeled machines | ||||
| ISO 7852:1983 | Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions) | ||||
| ISO 10263-5:2009 | Earth-moving machinery -- Operator enclosure environment -- Part 5: Windscreen defrosting system test method | ||||
| ISO 10265:1998 | Earth-moving machinery -- Crawler machines -- Performance requirements and test procedures for braking systems | ||||
| ISO 10266:1992 | Earth-moving machinery -- Determination of slope limits for machine fluid systems operation -- Static test method | ||||
| ISO 10570:2004 | Earth-moving machinery -- Articulated frame lock -- Performance requirements | ||||
| ISO 13766-1 | Earth-moving machinery and building construction machinery -- Electromagnetic compatibility (EMC) -- Part 1: General EMC requirements under typical electromagnetic environmental conditions | ||||
| ISO 8686-1:1989 | Cranes -- Design principles for loads and load combinations -- Part 1: General | ||||
| ISO 8686-5:2017 | Cranes -- Design principles for loads and load combinations -- Part 5: Overhead travelling and portal bridge cranes | ||||
| ISO 13202:2003 | Cranes -- Measurement of velocity and time parameters | ||||
| ISO 15442:2012/Amd 1:2015 | |||||
| ISO 22986:2007 | Cranes -- Stiffness -- Bridge and gantry cranes | ||||
| ISO/TR 27245:2007 | Cranes -- Tower cranes -- International Standards for design, manufacture, use and maintenance requirements and recommendations | ||||
| ISO 500-3:2014 | Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 3: Main PTO dimensions and spline dimensions, location of PTO | ||||
| ISO 789-1:1981 | Agricultural tractors -- Test procedures -- Part 1: Power tests | ||||
| ISO 789-3:1982 | Agricultural tractors -- Test procedures -- Part 3: Turning and clearance diameters | ||||
| ISO 841:1974 | Numerical control of machines -- Axis and motion nomenclature | ||||
| ISO 5692-1:2004 | Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 1: Dimensions for hitch rings of 50/30 mm cross section | ||||
| ISO 5692-2:2002 | Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket | ||||
| ISO 6094:1981 | Agricultural and forestry tractors -- Accidental overturning report form | ||||
| ISO 6489-1:1980 | Agricultural vehicles -- Mechanical connections on towing vehicles -- Part 1: Hook type -- Dimensions | ||||
| ISO 7071:1981 | Agricultural tractors -- Mounting for front ballast weights |
若您对上表中数据有任何疑问，请与网站联系。
