（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 9334:2012 | Optics and photonics -- Optical transfer function -- Definitions and mathematical relationships | ||||
| ISO/DIS 12125 | Prevailing torque hexagon high nuts with flange (with non-metallic insert), with fine pitch thread -- Product grades A and B | ||||
| ISO/CIE 11664-5:2016 | Colorimetry -- Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram | ||||
| ISO/CIE 19476:2014 | Characterization of the performance of illuminance meters and luminance meters | ||||
| IWA 15:2015 | Specification and method for the determination of performance of automated liquid handling systems | ||||
| ISO 641:1975 | Laboratory glassware -- Interchangeable spherical ground joints | ||||
| ISO 4794:1982 | Laboratory glassware -- Methods for assessing the chemical resistance of enamels used for colour coding and colour marking | ||||
| ISO 4793:1980 | Laboratory sintered (fritted) filters -- Porosity grading, classification and designation | ||||
| ISO 4797:1981 | Laboratory glassware -- Flasks with conical ground joints | ||||
| ISO 14706:2000 | Surface chemical analysis -- Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy | ||||
| ISO/TS 15338:2009 | Surface chemical analysis -- Glow discharge mass spectrometry (GD-MS) -- Introduction to use | ||||
| ISO 16413:2013 | Evaluation of thickness, density and interface width of thin films by X-ray reflectometry -- Instrumental requirements, alignment and positioning, data collection, data analysis and reporting | ||||
| ISO/TR 18394:2006 | Surface chemical analysis -- Auger electron spectroscopy -- Derivation of chemical information | ||||
| ISO 965-3:1998 | ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads | ||||
| ISO 965-4:1998 | ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing | ||||
| ISO 2009:1983 | Slotted countersunk flat head screws (common head style) -- Product grade A | ||||
| ISO 4026:1977 | Hexagon socket set screws with flat point | ||||
| ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess -- Product grade A | ||||
| ISO 14275:2002 | Aerospace -- Drives, internal, offset cruciform, ribbed -- Metric series | ||||
| ISO 3223:1989 | Aerospace -- Nuts, anchor, self-locking, fixed, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/ 235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C -- Dimensions | ||||
| ISO 7332:1983 | Metric fasteners for aerospace construction -- Nuts, anchor, self-locking, floating, two-lug, reduced series, with counterbore -- Strength classification 1 100 MPa -- Maximum operating temperature 235 degrees C | ||||
| ISO 12273:2010 | Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 12272:1998 | Aerospace -- Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 12274:1997 | Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 13597:2000 | Aerospace -- Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated -- Dimensions | ||||
| ISO 4379:1978 | Plain bearings -- Solid copper alloy bushes _ Dimensions and tolerances | ||||
| ISO 3030-1:1974 | Needle roller bearings -- Needle roller and cage assemblies -- Metric series -- Part 1: Radial needle roller and cage assemblies -- Boundary dimensions and tolerances | ||||
| ISO 3096:1974 | Needle roller bearings -- Needle rollers -- Dimensions -- Metric series | ||||
| ISO/DIS 3096 | Rolling bearings -- Needle rollers -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values | ||||
| ISO/DIS 18119.2 | Gas cylinders -- Seamless steel and seamless aluminium-alloy gas cylinders and tubes -- Periodic inspection and testing | ||||
| ISO 22434:2006 | Transportable gas cylinders -- Inspection and maintenance of cylinder valves | ||||
| ISO 560:1975 | Withdrawal of ISO 560-1975 | ||||
| ISO 7598:1982/Amd 1:1984 | |||||
| ISO 10468:2003/Amd 1:2010 | |||||
| ISO 10466:1997 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection | ||||
| ISO 13955:1997 | Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies | ||||
| ISO 1403:2005 | Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification | ||||
| ISO 4080:1991/Cor 2:1998 | |||||
| ISO 10649-3:2013 | Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer | ||||
| ISO 10889-2:2016 | Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs | ||||
| ISO 28881:2013/Cor 1:2013 | |||||
| ISO 10303-21:1994 | Industrial automation systems and integration -- Product data representation and exchange -- Part 21: Implementation methods: Clear text encoding of the exchange structure | ||||
| ISO/TS 10303-1013:2011 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1013: Application module: Person organization assignment | ||||
| ISO/TS 10303-1014:2004 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1014: Application module: Date time assignment | ||||
| ISO/TS 10303-1052:2014 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1052: Application module: Default tolerance | ||||
| ISO 14744-5:2000 | Welding -- Acceptance inspection of electron beam welding machines -- Part 5: Measurement of run-out accuracy | ||||
| ISO/TS 10303-1345:2005 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1345: Application module: Item definition structure | ||||
| ISO/TS 10303-1486:2011 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1486: Application module: Decision support | ||||
| ISO/TS 10303-1511:2004 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1511: Application module: Topologically bounded surface | ||||
| ISO/TS 10303-1514:2008 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1514: Application module: Advanced boundary representation |
若您对上表中数据有任何疑问，请与网站联系。
