（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/TR 14025:2000 | Environmental labels and declarations -- Type III environmental declarations | ||||
| ISO/DIS 14026 | Environmental labels and declarations -- Principles, requirements and guidelines for communication of footprint information | ||||
| ISO 13138:2012 | Air quality -- Sampling conventions for airborne particle deposition in the human respiratory system | ||||
| ISO/WD 16000-24 | Indoor air -- Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials | ||||
| ISO/CD 20468-1 | Guidelines for performance evaluation of treatment technologies for water reuse systems -- Part 1: General | ||||
| ISO 10359-1:1992 | Water quality -- Determination of fluoride -- Part 1: Electrochemical probe method for potable and lightly polluted water | ||||
| ISO 5667-16:1998 | Water quality -- Sampling -- Part 16: Guidance on biotesting of samples | ||||
| ISO 5815:1983 | Water quality -- Determination of biochemical oxygen demand after n days (BODn) -- Dilution and seeding method | ||||
| ISO 6332:1988 | Water quality -- Determination of iron -- Spectrometric method using 1,10-phenanthroline | ||||
| ISO 14911:1998 | Water quality -- Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography -- Method for water and waste water | ||||
| ISO 12782-2:2012 | Soil quality -- Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials -- Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite | ||||
| ISO 14869-1:2001 | Soil quality -- Dissolution for the determination of total element content -- Part 1: Dissolution with hydrofluoric and perchloric acids | ||||
| ISO 17601:2016 | Soil quality -- Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil | ||||
| ISO 16900-5:2016/CD Amd 1 | . | ||||
| ISO 7574-3:1985 | Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 3: Simple (transition) method for stated values for batches of machines | ||||
| ISO/TS 16312-1:2004 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria | ||||
| ISO 14405-2:2011/DAmd 1 | |||||
| ISO/DTR 19693 | Surface chemical anlysis -- Characterization of substrates for biosensing application | ||||
| ISO 10360-10:2016 | Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 10: Laser trackers for measuring point-to-point distances | ||||
| ISO/CD 13385-1 | Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Callipers; Design and metrological characteristics | ||||
| ISO/TS 16610-28:2010 | Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects | ||||
| ISO 14253-2:2011/Cor 1:2013 | |||||
| ISO 1413:1973 | Shock-resistant wristwatches | ||||
| ISO 12344:2010 | Thermal insulating products for building applications -- Determination of bending behaviour | ||||
| ISO 17738-1:2017 | Thermal insulation products -- Exterior insulation and finish systems -- Part 1: Materials and systems | ||||
| ISO 2425:1974/Amd 1:1982 | |||||
| ISO/R 781:1968 | Withdrawal of ISO/R 781-1968 | ||||
| ISO 3716:1977 | Liquid flow measurement in open channels -- Functional requirements and characteristics of suspended sediment load samplers | ||||
| ISO/NP 4360 | Hydrometry -- Open channel flow measurement using triangular profile weirs | ||||
| ISO 4364:1977 | Liquid flow measurement in open channels -- Bed material sampling | ||||
| ISO 8333:1985 | Liquid flow measurement in open channels by weirs and flumes -- V-shaped broad-crested weirs | ||||
| ISO 4802-1:2016 | Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 1: Determination by titration method and classification | ||||
| ISO 6145-4:1986 | Gas analysis -- Preparation of calibration gas mixtures -- Dynamic volumetric methods -- Part 4: Continuous injection method | ||||
| ISO/NP 6145-7 | Gas analysis -- Preparation of calibration gas mixtures using dynamic methods -- Part 7: Thermal mass-flow controllers | ||||
| ISO/TR 18394:2016 | Surface chemical analysis -- Auger electron spectroscopy -- Derivation of chemical information | ||||
| ISO 78-3:1983 | Chemistry -- Layouts for standards -- Part 3: Standard for molecular absorption spectrometry | ||||
| ISO 24173:2009 | Microbeam analysis -- Guidelines for orientation measurement using electron backscatter diffraction | ||||
| ISO/CD 20720 | Microbeam analysis - Methods of the specimen preparation for analysis of general powders using WDS and EDS | ||||
| ISO 4755:1983 | Fasteners -- Thread undercuts for external metric ISO threads | ||||
| ISO/FDIS 16228 | Fasteners -- Types of inspection documents | ||||
| ISO 898-5:1980 | Mechanical properties of fasteners -- Part 5: Set screws and similar threaded fasteners not under tensile stresses | ||||
| ISO 4014:1999 | Hexagon head bolts -- Product grades A and B | ||||
| ISO 4017:2014 | Fasteners -- Hexagon head screws -- Product grades A and B | ||||
| ISO 4026:1993 | Hexagon socket set screws with flat point | ||||
| ISO 4029:2003 | Hexagon socket set screws with cup point | ||||
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) | ||||
| ISO 3186:1994 | Aerospace -- Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa -- Dimensions | ||||
| ISO 8279:2008 | Aerospace -- Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C -- Dimensions | ||||
| ISO 8538:1999 | Aerospace -- Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 9156:1998 | Aerospace -- Nuts, anchor, self-locking, fixed, 90 degrees corner, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C -- Dimensions |
若您对上表中数据有任何疑问，请与网站联系。
