（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| SANS 1700-12-6 Ed.1(1996/R2011) | Fasteners - Part 12: Set Screws - Section 6: Slotted Set Screws With Flat Point | ||||
| SANS 1700-12-7 Ed.1(1996/R2011) | Fasteners - Part 12: Set Screws - Section 7: Slotted Set Screws With Cone Point | ||||
| SANS 1700-12-8 Ed.1(1996/R2011) | Fasteners - Part 12: Set Screws - Section 8: Slotted Set Screws With Long Dog Point | ||||
| ISO 13943 ed2.0-2008 | Fire safety - Vocabulary | ||||
| SANS 1700-12-9 Ed.1(1996/R2011) | Fasteners - Part 12: Set Screws - Section 9: Slotted Set Screws With Cup Point | ||||
| UL 174-2005 Ed. 11 | Household Electric Storage Tank Water Heaters | 2004-04-29 | |||
| SANS 1700-13-1 Ed.1(1996/R2011) | Fasteners - Part 13: Tapping Screws - Section 1: Hexagon Head Tapping Screws | ||||
| ISO 15118-1 ed1.0-2013 | Road vehicles -- Vehicle to grid communication interface -- Part 1: General information and use-case definition | ||||
| SANS 1700-13-10 Ed.1(2003/R2010) | Fasteners - Part 13: Tapping Screws - Section 10: Cross Recessed Pan Head Drilling Screws With Tapping Screw Thread | ||||
| SANS 1700-13-10 Ed.1(2003) | Fasteners - Part 13: Tapping Screws - Section 10: Cross Recessed Pan Head Drilling Screws With Tapping Screw Thread | ||||
| SANS 1700-13-11 Ed.1(2003/R2010) | Fasteners - Part 13: Tapping Screws - Section 11: Cross Recessed Countersunk Head Drilling Screws With Tapping Screw Thread | ||||
| ISO 80000-1 ed1.0-2009 | Quantities and units - Part 1: General | ||||
| SANS 1700-13-11 Ed.1(2003) | Fasteners - Part 13: Tapping Screws - Section 11: Cross Recessed Countersunk Head Drilling Screws With Tapping Screw Thread | ||||
| ISO 80000-2 ed1.0-2009 | Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology | ||||
| SANS 1700-13-3:1996 | Fasteners - Part 13: Tapping Screws - Section 3: Slotted Countersunk (flat) Head Tapping Screws (common Head Style) | ||||
| 2009全国民用建筑工程设计技术措施:规划·建筑·景观 | 2010-02-05 | 2010-02-05 | |||
| SANS 1700-13-2 Ed.1(1996/R2011) | Fasteners - Part 13: Tapping Screws - Section 2: Slotted Pan Head Tapping Screws | ||||
| SANS 1700-13-12 Ed.1(2003/R2010) | Fasteners - Part 13: Tapping Screws - Section 12: Cross Recessed Raised Countersunk Head Drilling Screws With Tapping Screw Thread | ||||
| SANS 1700-13-12 Ed.1(2003) | Fasteners - Part 13: Tapping Screws - Section 12: Cross Recessed Raised Countersunk Head Drilling Screws With Tapping Screw Thread | ||||
| SANS 1700-13-3 Ed.1(1996/R2011) | Fasteners - Part 13: Tapping Screws - Section 3: Slotted Countersunk (Flat) Head Tapping Screws (Common Head Style) | ||||
| ISO 80000-3 ed1.0-2006 | Quantities and units - Part 3: Space and time | ||||
| SANS 1700-13-4 Ed.1(1996/R2011) | Fasteners - Part 13: Tapping Screws - Section 4: Slotted Raised Countersunk (oval) Head Tapping Screws (common Head Style) | ||||
| ISO 80000-4 ed1.0-2006 | Quantities and units - Part 4: Mechanics | ||||
| ISO 80000-5 ed1.0 | Quantities and units - Part 5: Thermodynamics | ||||
| SANS 1700-13-5 Ed.1(1996/R2011) | Fasteners - Part 13: Tapping Screws - Section 5: Cross Recessed Pan Head Tapping Screws | ||||
| SANS 1700-13-6 Ed.1(1996/R2009) | Fasteners - Part 13: Tapping Screws - Section 6: Cross Recessed Countersunk (flat) Head Tapping Screws (common Head Style) | ||||
| SANS 1700-13-7 Ed.1(1996/R2011) | Fasteners - Part 13: Tapping Screws - Section 7: Cross Recessed Raised Countersunk (oval) Head Tapping Screws | ||||
| P-IEC 61000-4-6 ed2.2 Consol. with am1&2-2006 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | ||||
| SANS 1700-14-1 Ed.2(2003/R2010) | Fasteners - Part 14: Hexagon Nuts - Section 1: Hexagon Nuts, Style 1 - Product Grades A And B | ||||
| SANS 1700-14-1 Ed.2(2003) | Fasteners - Part 14: Hexagon Nuts - Section 1: Hexagon Nuts, Style 1 - Product Grades A And B | ||||
| SANS 1700-13-9 Ed.1(2003/R2010) | Fasteners - Part 13: Tapping Screws - Section 9: Hexagon Washer Head Drilling Screws With Tapping Screw Thread | ||||
| SANS 1700-13-9 Ed.1(2003) | Fasteners - Part 13: Tapping Screws - Section 9: Hexagon Washer Head Drilling Screws With Tapping Screw Thread | ||||
| P-IEC 61000-4-6 ed2.1 Consol. with am1-2004 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | ||||
| SANS 1700-13-8 Ed.1(2003/R2010) | Fasteners - Part 13: Tapping Screws - Section 8: Tapping Screw And Washer Assemblies With Plain Washers | ||||
| SANS 1700-13-8 Ed.1(2003) | Fasteners - Part 13: Tapping Screws - Section 8: Tapping Screw And Washer Assemblies With Plain Washers | ||||
| IEC 61000-4-6 ed2.0-2003 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | ||||
| P-IEC 61000-4-6 ed1.1 Consol. with am1-2001 | Electromagnetic compatibility (EMC)- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | ||||
| P-IEC 61000-4-6 ed1.0-1996 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields | ||||
| ISO 80000-7 ed1.0-2008 | Quantities and units - Part 7: Light | ||||
| SANS 1700-14-10 Ed.1(2003) | Fasteners - Part 14: Hexagon Nuts - Section 10: Hexagon Nuts For Structural Bolting With Large Width Across Flats, Style 1 - Product Grade B - Property Class 10 | ||||
| IEC-61000-4-7 COR.1-2004 | CORRIGENDUM 1-Electromagnetic compatibility (EMC) –Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | ||||
| SANS 1700-14-11 Ed.1(2003) | Fasteners - Part 14: Hexagon Nuts - Section 11: Hexagon Nuts For Structural Bolting, Style 2, Hot-dip Galvanized (oversize Tapped) - Product Grade A - Property Class 9 | ||||
| SANS 1700-14-12 Ed.2(2003/R2010) | Fasteners - Part 14: Hexagon Nuts - Section 12: Hexagon Nuts, Style 1, With Metric Fine Pitch Thread - Product Grades A And B | ||||
| SANS 1700-14-12 Ed.2(2003) | Fasteners - Part 14: Hexagon Nuts - Section 12: Hexagon Nuts, Style 1, With Metric Fine Pitch Thread - Product Grades A And B | ||||
| ISO 80000-8 ed1.0-2007 | Quantities and units - Part 8: Acoustics | ||||
| P-IEC 61000-4-7 ed1.0-1991 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 7: General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | ||||
| ISO 80000-10 ed1.0-2009 | Quantities and units - Part 10: Atomic and nuclear physics | ||||
| P-IEC 61000-4-8 ed1.1 Consol. with am1-2001 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test | ||||
| P-IEC 61000-4-8 ed1.0-1993 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test. Basic EMC Publication | ||||
| SANS 1700-14-15 Ed.1(2003/R2010) | Fasteners - Part 14: Hexagon Nuts - Section 15: Hexagon Nuts With Flange - Fine Pitch Thread |
若您对上表中数据有任何疑问，请与网站联系。
