（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| UL 555C Ed. 4 (2014) | Ceiling Dampers | 2014-12-16 | |||
| IEC 61000-4-17-am2 ed1.0-2008 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | ||||
| ISO 5168-2005 | Measurement of fluid flow - Procedures for the evaluation of uncertainties | ||||
| SANS 1700-16-5 Ed.1(2003/R2010) | Fasteners - Part 16: Washers - Section 5: Plain Washers - Small Series - Product Grade A | ||||
| IEC 61000-6-3 ed2.0-2006 | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments | ||||
| UL 555C Ed. 3 (2006) | Ceiling Dampers | 2006-10-11 | |||
| ISO 7005-1 2011 | Steel flanges for industrial and general service piping systems | ||||
| P-IEC 61000-4-21 ed1.0-2003 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods | ||||
| ISO 7005-2 1988 | Metallic flanges Part 2:Cast iron flanges | ||||
| ISO 7005-3 1988 | Metallic flanges Part 3:Copper alloy and composite flanges | ||||
| IEC 61000-6-4 ed2.0-2006 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | ||||
| ISO TR 12765 1998 | Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters | ||||
| SANS 1700-16-5 Ed.1(2003) | Fasteners - Part 16: Washers - Section 5: Plain Washers - Small Series - Product Grade A | ||||
| UL 844 Ed. 13 (2012) | Luminaires For Use In Hazardous (Classified) Locations | 2012-06-29 | |||
| TIA 222 G 2005(R 2012) | Structural Standard for Antenna Supporting Structures and Antennas | ||||
| IEC 61000-6-6 ed1.0-2003 | Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment | ||||
| UL 844 Ed. 12 (2006) | Luminaires For Use In Hazardous (Classified) Locations | 2006-01-11 | |||
| SANS 1700-16-9 Ed.1(2004/R2009) | Fasteners - Part 16: Washers - Section 9: Plain Washers, Chamfered, Hardened, And Tempered For High-strength Structural Bolting | ||||
| IEC 60079-1 2014 | Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d" | ||||
| SANS 1700-16-8 Ed.1(2004/R2009) | Fasteners - Part 16: Washers - Section 8: Plain Washers For High-strength Structural Bolting, Hardened And Tempered | ||||
| IEC 61000-4-28 ed1.0-1999 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test | ||||
| SANS 1700-16-7 Ed.2(2003/R2010) | Fasteners - Part 16: Washers - Section 7: Plain Washers - Extra Large Series - Product Grade C | ||||
| UL 844 BULLETINS-2006 | Luminaires For Use In Hazardous (Classified) Locations | 2006-05-12 | |||
| IEC 61000-4-28-am1 ed1.0-2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test | ||||
| SANS 1700-16-7 Ed.2(2003) | Fasteners - Part 16: Washers - Section 7: Plain Washers - Extra Large Series - Product Grade C | ||||
| SMACNA 1793-2003 | Architectural Sheet Metal Manual | ||||
| IEC 60079-28 CORR 1-2010 | Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optica radiation | ||||
| SANS 1700-17-1 Ed.1(1998/R2011) | Fasteners - Part 17: Pins - Section 1: Split Pins | ||||
| IEC 61000-4-28-am2 ed1.0-2009 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase | ||||
| IEC 60079-28 INT 1 2014 | Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation | ||||
| UL 886-1993 | Outlet Boxes and Fittings for Use In Hazardous (Classified) Locations | 1994-02-14 | |||
| SANS 1700-17-10 Ed.1(1996/R2011) | Fasteners - Part 17: Pins - Section 10: Taper Pins With External Thread, Unhardened | ||||
| SDI 122-1999 | Installation and Troubleshooting Guide for Standard Steel Doors and Frames | ||||
| SANS 1700-17-11 Ed.1(1998/R2011) | Fasteners - Part 17: Pins - Section 11: Grooved Pins - Full-length Parallel Grooved, With Pilot | ||||
| IEC 60079-29-4 CORR 1-2010 | Explosive atmospheres – Part 29-4: Gas detectors – Performance requirements of open path detectors for flammable gases | ||||
| IEC 60079-33 2012 | Explosive atmospheres – Part 33: Equipment protection by special protection “s” | ||||
| PIP ARC01015:2014 | Architectural And Building Utilities Design Criteria | ||||
| PIP ARC01015:2009 | Architectural And Building Utilities Design Criteria | ||||
| DB13/T2029-2014 | 伺服变矩电动机 | 2014-07-07 | 2014-07-31 | ||
| DB13/T2030-2014 | 低温催化燃烧器 | 2014-07-07 | 2014-07-31 | ||
| IEC 60839-10-1 1995 | Part 10:Alarm systems for road vehicles -Section 1 : Passenger cars | ||||
| DB13/T2031.1-2014 | 泛能微网技术标准体系第1部分:基本定义及要求 | 2014-07-07 | 2014-07-31 | ||
| PIP ARC01015:2002 | Architectural and Building Utilities Design Criteria | ||||
| P-IEC 61000-4-30 ed1.0-2003 | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | ||||
| SDI 122-2007 | Installation And Troubleshooting Guide For Standard Steel Doors And Frames | ||||
| IEC 60839-5-2 1991 | Alarm systems Part 5: Requirements for alarm transmission systems Section 2: General requirements for equipment | ||||
| PIP ARC01016-EEDS:2014 | Electronic Entry Data Sheet for Building [Complete Revision] | ||||
| PIP ARC01016-EEDS:2009 | Electronic Entry Data Sheet for Building | ||||
| DB13/T2031.2-2014 | 泛能微网技术标准体系第2部分:分布式电源接入微网技术要求 | 2014-07-07 | 2014-07-31 | ||
| PIP ARC01016:2002 | Building Data Sheet |
若您对上表中数据有任何疑问，请与网站联系。
