（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 13163:2013 | Water quality -- Lead-210 -- Test method using liquid scintillation counting | ||||
| ISO/IEC 19762-5:2008 | Information technology -- Automatic identification and data capture (AIDC) techniques -- Harmonized vocabulary -- Part 5: Locating systems | ||||
| ISO/ASTM 51275:2013 | Practice for use of a radiochromic film dosimetry system | ||||
| ISO/ASTM 51539:2013 | Guide for use of radiation-sensitive indicators | ||||
| ISO/ASTM 51631:2002 | Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations | ||||
| ISO/ASTM 51631:2003 | Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations | ||||
| ISO/ASTM 51649:2005 | Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV | ||||
| ISO/IEC 19762-2:2008 | Information technology -- Automatic identification and data capture (AIDC) techniques -- Harmonized vocabulary -- Part 2: Optically readable media (ORM) | ||||
| ISO/ASTM 51649:2002 | Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV | ||||
| ISO/ASTM 51702:2013 | Practice for dosimetry in a gamma facility for radiation processing | ||||
| ISO/ASTM 51818:2013 | Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV | ||||
| ISO 12637-3:2009 | Graphic technology -- Vocabulary -- Part 3: Printing terms | ||||
| ISO/ASTM 51900:2009 | Guide for dosimetry in radiation research on food and agricultural products | ||||
| ISO 9279:1992 | Uranium dioxide pellets -- Determination of density and total porosity -- Mercury displacement method | ||||
| ISO 12637-5:2001 | Graphic technology -- Multilingual terminology of printing arts -- Part 5: Screen printing terms | ||||
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) | ||||
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation | ||||
| ISO/TR 3666:1977 | Viscosity of water | ||||
| ISO 6353-2:1983/Add 2:1986 | |||||
| ISO/TR 10989:2009 | Reference materials -- Guidance on, and keywords used for, RM categorization | ||||
| ISO 21940-12:2016 | Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviour | ||||
| ISO 21940-2:2017 | Mechanical vibration -- Rotor balancing -- Part 2: Vocabulary | ||||
| ISO 140-2:1991/Cor 1:1993 | |||||
| ISO 3382-2:2008 | Acoustics -- Measurement of room acoustic parameters -- Part 2: Reverberation time in ordinary rooms | ||||
| ISO/TR 13569:1997/Amd 1:1998 | |||||
| ISO 10140-1:2016 | Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 1: Application rules for specific products | ||||
| ISO 18913:2003 | Imaging materials -- Permanence -- Vocabulary | ||||
| ISO/TTA 5:2007 | Code of practice for creep/fatigue testing of cracked components | ||||
| ISO 4965-2:2012 | Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 2: Dynamic calibration device (DCD) instrumentation | ||||
| ISO 16630:2009 | Metallic materials -- Sheet and strip -- Hole expanding test | ||||
| ISO 1027:1983 | Radiographic image quality indicators for non-destructive testing -- Principles and identification | ||||
| ISO 3058:1974 | Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers | ||||
| ISO/FDIS 16371-2 | Non-destructive testing -- Industrial computed radiography with storage phosphor imaging plates -- Part 2: General principles for testing of metallic materials using X-rays and gamma rays | ||||
| ISO 9018:2003 | Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints | ||||
| ISO 1112:2009 | Horology -- Functional and non-functional jewels | ||||
| ISO 9133:1988 | Passenger cars -- Engine cooling systems -- Threaded pressure caps and their seats on filler necks | ||||
| ISO 10042:2005 | Welding -- Arc-welded joints in aluminium and its alloys -- Quality levels for imperfections | ||||
| ISO 14347:2008 | Fatigue -- Design procedure for welded hollow-section joints -- Recommendations | ||||
| ISO 6426-2:1984 | Horological vocabulary -- Part 2: Technico-commercial definitions | ||||
| ISO/CD 2100-503 | Aerospace elements of electrical and optical connection -- Test methods -- Part 503: Contact deformation after crimping | ||||
| ISO 3536:2016 | Road vehicles -- Safety glazing materials -- Vocabulary | ||||
| ISO 6621-1:1986 | Internal combustion engines -- Piston rings -- Part 1: Vocabulary | ||||
| ISO 24497-3:2007 | Non-destructive testing -- Metal magnetic memory -- Part 3: Inspection of welded joints | ||||
| ISO 4090:2001 | Photography -- Medical radiographic cassettes/screens/films and hard-copy imaging films -- Dimensions and specifications | ||||
| ISO 7637-0:1990 | Road vehicles -- Electrical disturbance by conduction and coupling -- Part 0: Definitions and general | ||||
| ISO 9236-1:1996 | Photography -- Sensitometry of screen/film systems for medical radiography -- Part 1: Determination of sensitometric curve shape, speed and average gradient | ||||
| ISO 3828:2008 | Shipbuilding and marine structures -- Deck machinery -- Vocabulary and symbols | ||||
| ISO 10332:2010 | Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness | ||||
| ISO/DIS 26262-1 | Road vehicles -- Functional safety -- Part 1: Vocabulary | ||||
| ISO 5832-7:1994 | Implants for surgery -- Metallic materials -- Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
若您对上表中数据有任何疑问，请与网站联系。
