（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 16948:2015 | Solid biofuels -- Determination of total content of carbon, hydrogen and nitrogen | ||||
| ISO 3085:2002 | Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement | ||||
| ISO 3085:1996 | Iron ores -- Experimental methods for checking the precision of sampling | ||||
| ISO 5416:1987 | Direct reduced iron -- Determination of metallic iron content -- Bromine-methanol titrimetric method | ||||
| ISO 10213:1991 | Aluminium ores -- Determination of total iron content -- Titanium trichloride reduction method | ||||
| ISO/DIS 11979-7 | Ophthalmic implants -- Intraocular lenses -- Part 7: Clinical investigations of intraocular lenses for the correction of aphakia | ||||
| ISO/CD 19976-2 | Copper, lead, and zinc sulfide concentrates - Determination of cadmium -- Part 2: Acid digestion and inductively-coupled plasma atomic emission spectrometric method | ||||
| ISO 3830:1981 | Petroleum products -- Gasoline -- Determination of lead content -- Iodine monochloride method | ||||
| ISO/DIS 4264 | Petroleum products -- Calculation of cetane index of middle-distillate fuels by the four variable equation | ||||
| ISO 5163:1977 | Motor and aviation-type fuels -- Determination of knock characteristics -- Motor method | ||||
| ISO 6246:2017 | Petroleum products -- Gum content of fuels -- Jet evaporation method | ||||
| ISO 8216-1:1986 | Petroleum products -- Fuels (class F) -- Classification -- Part 1: Categories of marine fuels | ||||
| ISO 10307-2:2009/Cor 1:2010 | |||||
| ISO 15156-3:2015 | Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | ||||
| ISO 3763:1976 | Wrought steels -- Macroscopic methods for assessing the content of non-metallic inclusions | ||||
| ISO/DIS 3887 | Steels -- Determination of the depth of decarburization | ||||
| ISO 8000-2:2012 | Data quality -- Part 2: Vocabulary | ||||
| ISO 4967:1979 | Steel -- Determination of content of non-metallic inclusions -- Micrographic method using standard diagrams | ||||
| ISO 4967:1998 | Steel -- Determination of content of nonmetallic inclusions -- Micrographic method using standard diagrams | ||||
| ISO 437:1982 | Steel and cast iron -- Determination of total carbon content -- Combustion gravimetric method | ||||
| ISO 671:1982 | Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric method | ||||
| ISO 4829-2:1988 | Steel and iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon contents between 0,01 and 0,05 % | ||||
| ISO 2732:1984 | Steel and cast iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method | ||||
| ISO 4829-1:1986 | Steel and cast iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 and 1,0 % | ||||
| ISO 4938:2016 | Steel and iron -- Determination of nickel content -- Gravimetric or titrimetric method | ||||
| ISO 11652:1997 | Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method | ||||
| ISO 15350:2000 | Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) | ||||
| ISO/FDIS 945-1 | Microstructure of cast irons -- Part 1: Graphite classification by visual analysis | ||||
| ISO/R 683-2:1968 | Heat-treated steels, alloy steels and free-cutting steels -- Part 2: Wrought quenched and tempered steels with 1 % chromium and 0,2 % molybdenum | ||||
| ISO/DIS 4954 | Steels for cold heading and cold extruding | ||||
| ISO/DIS 15835-1 | Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements | ||||
| ISO 9444-2:2009 | Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate | ||||
| ISO 11972:2015 | Corrosion-resistant cast steels for general applications | ||||
| ISO 3574:1976 | Cold-reduced carbon steel sheet of commercial and drawing qualities | ||||
| ISO 4950-1:1981 | High yield strength flat steel products -- Part 1: General requirements | ||||
| ISO 4997:1978 | Cold-reduced steel sheet of structural quality | ||||
| ISO 4999:1978 | Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities | ||||
| ISO 4999:1991 | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial and drawing qualities | ||||
| ISO/CD 5000 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities | ||||
| ISO 5951:1980 | Hot-rolled steel sheet of higher yield strength with improved formability | ||||
| ISO 16162:2005 | Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances | ||||
| ISO 16172:2011 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe | ||||
| ISO 1217:1975 | Displacement compressors -- Acceptance tests | ||||
| ISO 16120-2:2011 | Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general-purpose wire rod | ||||
| ISO 16120-4:2001 | Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications | ||||
| ISO 657-5:1976 | Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series | ||||
| ISO/CD 10679 | Steel -- Cast tool steel | ||||
| ISO/R 208:1961 | Composition of aluminium castings (complement to R 164) | ||||
| ISO 752:2004/Cor 1:2006 | |||||
| ISO 6361-5:2011 | Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 5: Chemical composition |
若您对上表中数据有任何疑问，请与网站联系。
