（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 5834-5:2005 | Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 5: Morphology assessment method | ||||
| ISO 7207-1:1994 | Implants for surgery -- Components for partial and total knee joint prostheses -- Part 1: Classification, definitions and designation of dimensions | ||||
| ISO 4602:1997 | Reinforcements -- Woven fabrics -- Determination of number of yarns per unit length of warp and weft | ||||
| ISO 10328-7:1996 | Prosthetics -- Structural testing of lower-limb prostheses -- Part 7: Test submission document | ||||
| ISO 10328-8:1996 | Prosthetics -- Structural testing of lower-limb prostheses -- Part 8: Test report | ||||
| ISO 14630:2005 | Non-active surgical implants -- General requirements | ||||
| ISO 3828:1976 | Shipbuilding -- Deck machinery -- Vocabulary | ||||
| ISO 14630:2012 | Non-active surgical implants -- General requirements | ||||
| ISO 14708-4:2008 | Implants for surgery -- Active implantable medical devices -- Part 4: Implantable infusion pumps | ||||
| ISO/DIS 13862 | Machinery for forestry -- Feller-bunchers -- Terms, definitions and commercial specifications | ||||
| ISO 14708-7:2013 | Implants for surgery -- Active implantable medical devices -- Part 7: Particular requirements for cochlear implant systems | ||||
| ISO/CD 14708-7 | Implants for surgery -- Active implantable medical devices -- Part 7: Particular requirements for cochlear implant systems | ||||
| ISO 14879-1:2000 | Implants for surgery -- Total knee-joint prostheses -- Part 1: Determination of endurance properties of knee tibial trays | ||||
| ISO 15675:2009 | Cardiovascular implants and artificial organs -- Cardiopulmonary bypass systems -- Arterial blood line filters | ||||
| ISO 683-14:1973 | Heat-treated steels, alloy steels and free-cutting steels -- Part 14: Steels for hot-formed and heat-treated springs | ||||
| ISO 18115-2:2013 | Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanning-probe microscopy | ||||
| ISO 6743-8:1987 | Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion) | ||||
| ISO 21809-2:2014 | Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings | ||||
| ISO 21809-2:2007/Cor 1:2008 | |||||
| ISO 3019-2:2001 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series | ||||
| ISO 15957:2015 | Test dusts for evaluating air cleaning equipment | ||||
| ISO 16890-1:2016 | Air filters for general ventilation -- Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) | ||||
| ISO 6372-1:1989 | Nickel and nickel alloys -- Terms and definitions -- Part 1: Materials | ||||
| ISO 16890-2:2016 | Air filters for general ventilation -- Part 2: Measurement of fractional efficiency and air flow resistance | ||||
| ISO 16170:2016 | In situ test methods for high efficiency filter systems in industrial facilities | ||||
| ISO 16890-4:2016 | Air filters for general ventilation -- Part 4: Conditioning method to determine the minimum fractional test efficiency | ||||
| ISO 29463-4:2011 | High-efficiency filters and filter media for removing particles in air -- Part 4: Test method for determining leakage of filter elements-Scan method | ||||
| ISO 3857-1:1977 | Compressors, pneumatic tools and machines -- Vocabulary -- Part 1: General | ||||
| ISO/DIS 8573-2 | Compressed air -- Contaminant measurement -- Part 2: Oil aerosol content | ||||
| ISO 8573-4:2001/Cor 1:2002 | |||||
| ISO 5391:1988 | Pneumatic tools and machines -- Vocabulary | ||||
| ISO 10156 | Gas cylinders -- Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets | ||||
| ISO 10156:1990 | Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets | ||||
| ISO 5941:1979 | Compressors, pneumatic tools and machines -- Preferred pressures | ||||
| ISO 7967-8:1990 | Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 8: Starting systems | ||||
| ISO 484-1:1981 | Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 1: Propellers of diameter greater than 2,50 m | ||||
| ISO 9059:1990 | Solar energy -- Calibration of field pyrheliometers by comparison to a reference pyrheliometer | ||||
| ISO 18847:2016 | Solid biofuels -- Determination of particle density of pellets and briquettes | ||||
| ISO 1992-2:1973/Amd 1:1979 | |||||
| ISO 23273-3:2006 | Fuel cell road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock | ||||
| IEC 823:1990 | Microprocessor system bus (VMSbus) -- Serial sub-system bus of the IEC 821 Bus (VMEbus) | ||||
| IEC 975:1989 | Microprocessor universal format for object modules | ||||
| ISO 2382-22:1986 | Information processing systems -- Vocabulary -- Part 22: Calculators | ||||
| ISO/IEC 10859:1997 | Information technology -- 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers | ||||
| ISO 11551:2003 | Optics and optical instruments -- Lasers and laser-related equipment -- Test method for absorptance of optical laser components | ||||
| ISO/IEC WD TR 38505-2 | Information technology -- Governance of IT -- Part 2: Implications of 38505-1 for data management | ||||
| ISO/IEC 15946-4:2004 | Information technology -- Security techniques -- Cryptographic techniques based on elliptic curves -- Part 4: Digital signatures giving message recovery | ||||
| ISO/IEC 27034-1:2011/Cor 1:2014 | |||||
| ISO 1989:1985/Amd 1:1992 | Intrinsic function module | ||||
| ISO/IEC 9075-14:2008/Cor 1:2010 |
若您对上表中数据有任何疑问，请与网站联系。
