（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 10349-11:1992 | Photography -- Photographic-grade chemicals -- Test methods -- Part 11: Determination of specific gravity | ||||
| ISO 2834-1:2006 | Graphic technology -- Laboratory preparation of test prints -- Part 1: Paste inks | ||||
| ISO 2834-2:2007 | Graphic technology -- Laboratory preparation test prints -- Part 2: Liquid printing inks | ||||
| ISO 2834-3:2008 | Graphic technology -- Laboratory preparation of test prints -- Part 3: Screen printing inks | ||||
| ISO 2836:1999 | Graphic technology -- Prints and printing inks -- Assessment of resistance to various agents | ||||
| ISO 2846-2:2007 | Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 2: Coldset offset lithographic printing | ||||
| ISO 10303-109:2004/Cor 1:2010 | |||||
| ISO/DIS 18481 | Hydrometry -- Liquid flow measurement using end depth method in channels with a free overfall | ||||
| ISO 1513:1992 | Paints and varnishes -- Examination and preparation of samples for testing | ||||
| ISO 730:2009/Amd 1:2014 | |||||
| ISO 1514:2004 | Paints and varnishes -- Standard panels for testing | ||||
| ISO 1514:2016 | Paints and varnishes -- Standard panels for testing | ||||
| ISO 1516:1981 | Paints, varnishes, petroleum and related products -- Flash/no flash test -- Closed cup equilibrium method | ||||
| ISO/IEC 23003-2:2010/Amd 1:2015 | SAOC conformance | ||||
| ISO 1518-2:2011 | Paints and varnishes -- Determination of scratch resistance -- Part 2: Variable-loading method | ||||
| ISO 2810:1974 | Paints and varnishes -- Notes for guidance on the conduct of natural weathering tests | ||||
| ISO/NP 2808 | Paints and varnishes -- Determination of film thickness | ||||
| ISO 2809:1976 | Paints and varnishes -- Determination of light fastness of paints for interior use | ||||
| ISO 13778:1999 | Plain bearings -- Quality assurance of thin-walled half bearings -- Selective assembly of bearings to achieve a narrow clearance range | ||||
| ISO 2811-4:2011 | Paints and varnishes -- Determination of density -- Part 4: Pressure cup method | ||||
| ISO 2812-2:2007 | Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method | ||||
| ISO 2812-3:2007 | Paints and varnishes -- Determination of resistance to liquids -- Part 3: Method using an absorbent medium | ||||
| ISO 18203:2016 | Steel -- Determination of the thickness of surface-hardened layers | ||||
| ISO 2813:1994 | Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees | ||||
| ISO/IEC 15772:1998/Cor 1:2000 | |||||
| ISO 2884-2:2003 | Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed | ||||
| ISO 3231:1993 | Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide | ||||
| ISO 3248:1975 | Paints and varnishes -- Determination of the effect of heat | ||||
| ISO 3233-2:2014 | Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle | ||||
| ISO/TR 9769:1990 | Steel and iron -- Review of available methods of analysis | ||||
| ISO 404:1981 | Steel and steel products -- General technical delivery requirements | ||||
| ISO 3233-3:2015 | Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material | ||||
| ISO 3251:1993 | Paints and varnishes -- Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes | ||||
| ISO 13900:1997 | Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation | ||||
| ISO 4950-1:1995/Amd 1:2003 | |||||
| ISO 3856-5:1984 | Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric method | ||||
| ISO 3856-3:1984 | Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method | ||||
| ISO 4622:1992 | Paints and varnishes -- Pressure test for stackability | ||||
| ISO 11950:1995 | Cold-reduced electrolytic chromium/chromium oxide-coated steel | ||||
| ISO 4624:2002 | Paints and varnishes -- Pull-off test for adhesion | ||||
| ISO 4623-2:2003 | Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates | ||||
| ISO 4624:1978 | Paints and varnishes -- Pull-off test for adhesion | ||||
| ISO 4628-2:1982 | Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 2: Designation of degree of blistering | ||||
| ISO 4628-4:2003 | Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking | ||||
| ISO 4628-5:1982 | Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 5: Designation of degree of flaking | ||||
| ISO 15812:2001 | Continuous mill flat rolled products -- Guidelines for improved ordering communication | ||||
| ISO 4628-6:2007 | Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method | ||||
| ISO 4628-8:2005 | Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe | ||||
| ISO 4628-6:2011 | Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method | ||||
| ISO 4628-10:2016 | Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion |
若您对上表中数据有任何疑问，请与网站联系。
