（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 6270-2:2005 | Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres | ||||
| ISO 16163:2012 | Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances | ||||
| ISO 6441:1984 | Paints and varnishes -- Indentation test (spherical or pyramidal) | ||||
| ISO 16163:2000 | Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances | ||||
| ISO 6272-1:2011 | Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter | ||||
| ISO 7252:1984 | Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method | ||||
| ISO 7724-1:1984 | Paints and varnishes -- Colorimetry -- Part 1: Principles | ||||
| ISO 7724-2:1984 | Paints and varnishes -- Colorimetry -- Part 2: Colour measurement | ||||
| ISO 7784-2:2016 | Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Method with abrasive rubber wheels and rotating test specimen | ||||
| ISO 7784-1:2016 | Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Method with abrasive-paper covered wheels and rotating test specimen | ||||
| ISO/IEC 23003-3:2012/Cor 1:2012 | |||||
| ISO 7783-1:1996 | Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films | ||||
| ISO 7784-3:2016 | Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen | ||||
| ISO 8130-3:1992 | Coating powders -- Part 3: Determination of density by liquid displacement pyknometer | ||||
| ISO 8130-1:1992 | Coating powders -- Part 1: Determination of particle size distribution by sieving | ||||
| ISO/NP 8130-3 | Coating powders -- Part 3: Determination of density by liquid displacement pyknometer | ||||
| ISO 8130-4:1992/Cor 1:1993 | |||||
| ISO 8130-4:1992 | Coating powders -- Part 4: Calculation of lower explosion limit | ||||
| ISO 9514:1992 | Paints and varnishes -- Determination of the pot-life of liquid systems -- Preparation and conditioning of samples and guidelines for testing | ||||
| ISO 1658:1973/Amd 1:1976 | |||||
| ISO 16163:2005 | Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances | ||||
| ISO 13521:2015 | Austenitic manganese steel castings | ||||
| ISO/R 2147:1971 | Aluminium alloys -- Sand cast test pieces -- Mechanical properties | ||||
| ISO 9117-4:2012 | Paints and varnishes -- Drying tests -- Part 4: Test using a mechanical recorder | ||||
| ISO/R 2298:1972 | Alluminium and its alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide | ||||
| ISO 5196-1:1980 | Magnesium alloys -- Determination of thorium -- Part 1: Gravimetric method | ||||
| ISO 3116:1981 | Wrought magnesium alloys -- Chemical composition and mechanical properties | ||||
| ISO 13092:2012 | Titanium and titanium alloys -- Titanium sponge | ||||
| ISO/R 209:1971 | Composition of wrought products of aluminium and aluminium alloys -- Chemical composition (per cent) | ||||
| ISO 7756:1984 | Wrought copper and copper alloys -- Drawn round bars -- Symmetric plus and minus tolerances on diameter and form tolerances | ||||
| ISO 7758:1984 | Wrought copper and copper alloys -- Drawn square bars -- Symmetric plus and minus tolerances on width across flats and form tolerances | ||||
| ISO 10545-4:2004 | Ceramic tiles -- Part 4: Determination of modulus of rupture and breaking strength | ||||
| ISO 17561:2002/Cor 1:2007 | |||||
| ISO/R 879:1968 | Withdrawal of ISO/R 879-1968 | ||||
| ISO 9514:2005 | Paints and varnishes -- Determination of the pot life of multicomponent coating systems -- Preparation and conditioning of samples and guidelines for testing | ||||
| ISO 9117-3:2010 | Paints and varnishes -- Drying tests -- Part 3: Surface-drying test using ballotini | ||||
| ISO 1147:1975 | Plastics -- Aqueous dispersions of polymers and copolymers -- Freeze-thaw cycle stability test | ||||
| ISO 10890:2010 | Paints and varnishes -- Modelling of biocide release rate from antifouling paints by mass-balance calculation | ||||
| ISO 11890-1:2000 | Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method | ||||
| ISO 11890-2:2006 | Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method | ||||
| ISO 11890-2:2000 | Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method | ||||
| ISO/NP 11890-2 | Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method | ||||
| ISO 11997-1:1998 | Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity | ||||
| ISO 11997-1:2005 | Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity | ||||
| ISO/FDIS 17231 | Leather -- Physical and mechanical tests -- Determination of water repellency of garment leather | ||||
| ISO/FDIS 11997-1 | Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity | ||||
| ISO 15184:1998 | Paints and varnishes -- Determination of film hardness by pencil test | ||||
| ISO 15710:2002 | Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution | ||||
| ISO 4892-2:2006/Amd 1:2009 | |||||
| ISO 16053:2004 | Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test |
若您对上表中数据有任何疑问，请与网站联系。
