（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 11402-2005 | Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)- Determination of Free Formaldehyde ISO 11402:1993; Supersedes EN ISO 9397:1997 and EN ISO 9020:1998 | ||||
| EN ISO 11432-2005 | Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005) | ||||
| EN ISO 11442-2006 | Technical product documentation - Document management (ISO 11442:2006) | ||||
| EN ISO 11501-2004 | Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995) | ||||
| EN ISO 11507-2007 | Paints And Varnishes - Exposure Of Coatings To Artificial Weathering - Exposure To Fluorescent Uv Lamps And Water | ||||
| EN ISO 11542-1-2001 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001) | ||||
| EN ISO 11547-1995 | Small craft - Start-in-gear protection (ISO 11547:1994) | ||||
| EN ISO 11593-1997 | Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary And Presentation Of Characteristics | ||||
| EN ISO 16654-2001 | Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 (ISO 16654:2001) | ||||
| EN ISO 16663-2-2003 | Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2003) | ||||
| EN ISO 16701-2008 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003) | ||||
| EN ISO 16720-2007 | Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005) | ||||
| EN ISO 16773-1-2007 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions | ||||
| EN ISO 16812-2007 | Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007) | ||||
| EN ISO 16871-2003 | Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) | ||||
| EN ISO 17070-2006 | Leather - Chemical tests - Determination of pentachlorophenol content [Superseded: CEN CEN/TS 14494] | ||||
| EN ISO 17078-2-2007 | Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels | ||||
| EN ISO 17201-1-2005 | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005) | ||||
| EN ISO 17233-2002 | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002) | ||||
| EN ISO 17236-2002 | Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2002) | ||||
| EN ISO 17287-2003 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving (ISO 17287:2003) | ||||
| EN ISO 17294-1-2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) | ||||
| EN ISO 17375-2006 | Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006) | ||||
| EN ISO 17641-1-2004 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004) | ||||
| EN ISO 17642-1-2004 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004) | ||||
| EN 13878-2003 | Leisure accommodation vehicles - Terms and definitions | ||||
| EN 13880-1-2003 | Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C | ||||
| EN 13880-3-2003 | Hot Applied Joint Sealants - Part 3: Test Method For The Determination Of Penetration And Recovery (resilience) | ||||
| EN 13880-5-2004 | Hot Applied Joint Sealants - Part 5: Test Method For The Determination Of Flow Resistance | ||||
| EN 14717-2005 | Welding And Allied Processes - Environmental Check List | ||||
| EN 14719-2005 | Pulp, Paper And Board - Determination Of The Diisopropylnaphthalene (dipn) Content By Solvent Extraction | ||||
| EN 14728-2005 | Imperfections In Thermoplastic Welds - Classification | ||||
| EN 14730-2-2006 | Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds | ||||
| EN 14737-1-2004 | Space Engineering - Ground Systems And Operations - Part 1: Principles And Requirements | ||||
| EN 14738-2004 | Space product assurance Hazard analysis | ||||
| EN 14743-2005 | Water Conditioning Equipment Inside Buildings - Softeners - Requirements For Performance, Safety And Testing | ||||
| EN 14749-2005 | Domestic and kitchen storage units and worktops - Safety requirements and test methods | ||||
| EN 14750-2-2006 | Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests | ||||
| EN ISO 11135-1-2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices [Superseded: CEN EN 550] | ||||
| EN ISO 11138-1-2006 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2006) | ||||
| EN ISO 11138-5-2006 | Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2006)ISO 11138-5:2006;:1999 | ||||
| EN ISO 11146-2-2005 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005) | ||||
| EN ISO 11192-2005 | Small craft - Graphical symbols (ISO 11192:2005) | ||||
| EN ISO 11199-3-2005 | Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables (ISO 11199-3:2005) | ||||
| EN ISO 11212-4-1997 | Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997) | ||||
| EN ISO 15996-2005 | Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005) | ||||
| EN ISO 16000-5-2007 | Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) (ISO 16000-5:2007) | ||||
| EN ISO 16000-9-2006 | Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006) | ||||
| EN ISO 16000-11-2006 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) | ||||
| EN ISO 16035-2005 | Animal and vegetable fats and oils - Determination of low-boiling halogenated hydrocarbons in edible oils (ISO 16035:2003) |
若您对上表中数据有任何疑问，请与网站联系。
