（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 16101-2004 | Packaging - Transport Packaging For Dangerous Goods - Plastics Compatibility Testing | ||||
| EN ISO 16136-2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) | ||||
| EN ISO 16139-2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) | ||||
| EN ISO 16151-2008 | Corrosion Of Metals And Alloys - Accelerated Cyclic Tests With Exposure To Acidified Salt Spray, ''dry'' And ''wet'' Conditions | ||||
| EN ISO 16264-2004 | Water Quality - Determination Of Soluble Silicates By Flow Analysis (fia And Cfa) And Photometric Detection | ||||
| EN ISO 16276-1-2007 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007) | ||||
| EN ISO 16284-2006 | Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2006) | ||||
| EN ISO 16348-2003 | Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003) | ||||
| EN ISO 16409-2006 | Dentistry - Oral hygiene products - Manual interdental brushes Incorporates Amendment A1: 2010 | ||||
| EN ISO 16432-2007 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) | ||||
| EN ISO 16467-2003 | Packaging - Transport packaging for dangerous goods - Test methods for IBCs ISO 16467:2003 | ||||
| EN ISO 16484-2-2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) | ||||
| EN ISO 16583-2002 | Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt ISO 16583:2002 | ||||
| EN ISO 16585-2002 | Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002) | ||||
| ISO 15848-2-2006 | Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2006) | 2015-06-01 | |||
| EN ISO 15867-2003 | Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003) | ||||
| EN ISO 15880-2004 | Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) | ||||
| EN ISO 15927-5-2004 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004) | ||||
| EN 878-2004 | Chemicals Used For Treatment Of Water Intended For Human Consumption - Aluminium Sulfate | ||||
| EN 851-1995 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications | ||||
| EN 853-1996 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification | ||||
| EN 867-5-2001 | Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S | ||||
| EN 872-2005 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters | ||||
| EN 882-2004 | Chemicals used for treatment of water intended for human consumption - Sodium aluminate | ||||
| EN 885-2004 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate | ||||
| EN 888-2004 | Chemicals used for treatment of water intended for human consumption - Iron (III) chloride | ||||
| EN 894-1-1997 | Safety Of Machinery - Ergonomics Requirements For The Design Of Displays And Control Actuators - General Principles For Human Interactions With Displays And Control Actuators | ||||
| EN 843-2-2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio | ||||
| EN 843-4-2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness [Superseded: CEN ENV 843-4] | ||||
| EN 12945-2008 | Liming materials - Determination of neutralizing value - Titrimetric methods | ||||
| EN ISO 11343-2005 | Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003) | ||||
| EN ISO 18613-2003 | Repair of flat wooden pallets (ISO 18613:2003) | ||||
| EN 13126-7-2007 | Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches | ||||
| EN ISO 11820-1996 | Acoustics - Measurements on silencers in situ (ISO 11820:1996) | ||||
| EN ISO 11897-2001 | Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999) | ||||
| EN ISO 11904-2-2004 | Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004) | ||||
| EN ISO 11908-1998 | Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996) | ||||
| EN ISO 11970-2007 | Specification and approval of welding procedures for production welding of steel castings (ISO 11970:2001) | ||||
| EN ISO 11979-2-1999 | Ophthalmic Implants - Intraocular Lenses - Part 2: Optical Properties and Test Methods ISO 11979-2: 1999; Corrigendum: November 2003 | ||||
| EN ISO 11979-6-2007 | Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability (ISO 11979-6:2007) | ||||
| EN ISO 11979-10-2006 | Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses (ISO 11979-10:2006) | ||||
| EN ISO 11985-1997 | Ophthalmic Optics - Contact Lenses - Ageing By Exposure To Uv And Visible Radiation (in Vitro Method) | ||||
| EN ISO 11998-2006 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) | ||||
| EN ISO 12005-2003 | Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) | ||||
| EN ISO 12058-1-2002 | Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997) | ||||
| EN ISO 12086-1-2006 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:2006) | ||||
| EN ISO 12127-2-2007 | Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) | ||||
| EN ISO 18756-2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003) | ||||
| EN ISO 17642-3-2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) | ||||
| EN ISO 11607-2-2006 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) |
若您对上表中数据有任何疑问，请与网站联系。
