（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 1015-4-1998 | Methods Of Test For Mortar For Masonry - Part 4: Determination Of Consistence Of Fresh Mortar (by Plunger Penetration) | ||||
| EN 1015-7-1998 | Methods Of Test For Mortar For Masonry - Part 7: Determination Of Air Content Of Fresh Mortar | ||||
| EN 1015-12-2000 | Methods Of Test For Mortar For Masonry - Part 12: Determination Of Adhesive Strength Of Hardened Rendering And Plastering Mortars On Substrates | ||||
| EN 1015-18-2002 | Methods Of Test For Mortar For Masonry - Part 18: Determination Of Water Absorption Coefficient Due To Capillary Action Of Hardened Mortar | ||||
| EN 1021-1-2006 | Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | ||||
| EN 1022-2005 | Domestic furniture - Seating - Determination of stability | ||||
| EN 692-2005 | Machine Tools - Mechanical Presses - Safety | ||||
| EN 716-1-2008 | Furniture - Children's Cots And Folding Cots For Domestic Use - Part 1: Safety Requirements | ||||
| EN 721-2004 | Leisure Accommodation Vehicles - Safety Ventilation Requirements | ||||
| EN 725-4-2006 | Advanced Technical Ceramics - Methods Of Test For Ceramic Powders - Part 4: Determination Of Oxygen Content In Aluminium Nitride By Xrf Analysis | ||||
| EN 725-8-2006 | Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density | ||||
| EN 725-10-2007 | Advanced Technical Ceramics - Methods Of Test For Ceramic Powders - Part 10: Determination Of Compaction Properties | ||||
| EN 725-12-2001 | Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia | ||||
| EN 726-2-1995 | Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 2: Security Framework | ||||
| EN 1028-2-2002 | Fire-fighting Pumps - Fire-fighting Centrifugal Pumps With Primer - Part 2: Verification Of General And Safety Requirements | ||||
| EN 1034-1-2000 | Safety Of Machinery - Safety Requirements For The Design And Construction Of Paper Making And Finishing Machines - Part 1: Common Requirements | ||||
| EN 1034-4-2005 | Safety Of Machinery - Safety Requirements For The Design And Construction Of Paper Making And Finishing Machines - Part 4: Pulpers And Their Loading Facilities | ||||
| EN 1034-6-2005 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender | ||||
| EN 1034-13-2005 | Safety Of Machinery - Safety Requirements For The Design And Construction Of Paper Making And Finishing Machines - Part 13: Machines For De-wiring Bales And Units | ||||
| EN 1035-1998 | Tannery Machines - Moving Platen Machinery - Safety Requirements Incorporating Corrigendum July 2002 | ||||
| EN 1036-2-2008 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard | ||||
| EN 1045-1997 | Brazing - Fluxes for brazing - Classification and technical delivery conditions | ||||
| EN 1052-1-1998 | Methods of test for masonry - Part 1: Determination of compressive strength | ||||
| EN 1052-3-2002 | Methods of test for masonry - Part 3: Determination of initial shear strength | ||||
| EN 1052-5-2005 | Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method | ||||
| EN 1056-1996 | Methods Of Testing Plastics - Thermoplastics Pipes, Fittings And Valves - Plastics Piping And Ducting Systems - Plastics Pipes And Fittings - Method For Exposure To Direct (natural) Weathering | ||||
| EN 726-6-1995 | Identification card system - Telecommunications integrated circuit(s) cards and terminals - Part 6: Telecommunication features | ||||
| EN 730-1-2002 | Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor | ||||
| EN 733-1995 | End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system | ||||
| EN 735-1995 | Overall Dimensions of Rotodynamic Pumps - Tolerances | ||||
| EN 746-8-2000 | Industrial Thermoprocessing Equipment - Part 8: Particular Safety Requirements for Quenching Equipment | ||||
| EN 749-2004 | Playing field equipment - Handball goals - Functional and safety requirements, test methods Supersedes EN 749:1995 + A1:1998; Incorporating Corrigendum October 2005 | ||||
| EN 751-1-1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds | ||||
| EN 751-3-1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes | ||||
| EN 754-1-2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery | ||||
| EN 754-3-2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form | ||||
| EN 754-5-2008 | Aluminium And Aluminium Alloys - Cold Drawn Rod/bar And Tube - Part 5: Rectangular Bars, Tolerances On Dimensions And Form | ||||
| EN 754-7-2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form | ||||
| EN 755-1-2008 | Aluminium And Aluminium Alloys - Extruded Rod/bar, Tube And Profiles - Part 1: Technical Conditions For Inspection And Delivery | ||||
| EN ISO 9173-1-2006 | Dentistry - Extraction forceps - Part 1: General requirements and test methods (ISO 9173-1:2006) | ||||
| EN 14499-2004 | Textile floor coverings - Minimum requirements for carpet underlays | ||||
| EN 1023-2-2000 | Office Furniture - Screens - Parts 2: Mechanical Safety Requirements | ||||
| EN 1328-1996 | Cement bonded particleboards - Determination of frost resistance | ||||
| EN 1330-1-1998 | Non destructive testing - Terminology - Part 1: List of general terms | ||||
| EN 1330-11-2007 | Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials | ||||
| EN 1900-1998 | Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology | ||||
| EN 1903-2008 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing | ||||
| EN 1908-2004 | Safety requirements of cableway installations designed to carry persons - Tensioning devices | ||||
| EN 1528-3-1996 | Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) - Part 3: Clean-Up Methods | ||||
| EN 1529-1999 | Doors Leaves - Height, Width, Thickness and Squareness - Tolerance Classes |
若您对上表中数据有任何疑问，请与网站联系。
