（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| DB41/T1114-2015 | 五角枫园林绿化苗木定向培育技术规程 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1115-2015 | 绿色食品无花果栽培技术规程 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1116-2015 | 压力容器检验报告附图画法 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1117-2015 | 展开图绘制基本方法 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1118-2015 | 承压类特种设备检验检测机构固定资产分类与代码 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1119-2015 | 固定式液压升降平台检验规则 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1120-2015 | 桥架型起重机型号编制规则 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1121-2015 | 电梯安全评估规则 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1122-2015 | 机械式停车设备应急救援预案编制导则 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1123-2015 | 机械式停车设备安全运用管理 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1124-2015 | 升降横移类机械式停车设备监督检验规范 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1125-2015 | 机电类特种设备安全管理规范通用要求 | 2015-09-29 | 2015-12-29 | ||
| DB41/T1126-2015 | 机电类特种设备安全管理规范使用单位 | 2015-09-29 | 2015-12-29 | ||
| 2015年第22号 | 关于批准发布《超声波杨木浆》等17项河南省地方标准的公告 | 2015-09-29 | 2015-12-29 | ||
| SAE AMS 4102G-2001 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 2001-11-15 | |||
| SAE AMS 4102E-1985 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 1985-04-01 | |||
| SAE AMS 4102D-1976 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 1976-07-01 | |||
| SAE AMS 4102C-1967 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 1967-11-01 | |||
| SAE AMS 4102B-1966 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 1966-03-01 | |||
| SAE AMS 4102A-1951 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 1951-12-01 | |||
| SAE AMS 4102-1948 | Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated | 1948-07-01 | |||
| SAE AMS 3798/5C-2015 | Webbing, Low Modulus Aramid, 1-23/32 (44) Wide, 3,600 (16,014) Breaking Strength, Herringbone Twill, Resin Treated | 2015-04-14 | |||
| SAE AMS 3798/5A-1989 | Webbing, Low Modulus Aramid, 1-23/32 (44) Wide, 3,600 (16,014) Breaking Strength, Herringbone Twill, Resin Treated | 1989-04-01 | |||
| SAE AMS 3798/5-1983 | Webbing, Low Modulus Aramid, 1-23/32 (44) Wide, 3,600 (16,014) Breaking Strength, Herringbone Twill, Resin Treated | 1983-10-01 | |||
| SAE AMS 3798/14C-2015 | Webbing, Low Modulus Aramid, 1-1/4 (32) Wide, 800 (3,559) Breaking Strength, Herringbone Twill | 2015-04-14 | |||
| SAE AMS 3798/14A-1989 | Webbing, Low Modulus Aramid, 1-1/4 (32) Wide, 800 (3,559) Breaking Strength, Herringbone Twill | 1989-04-01 | |||
| SAE AMS 3798/14-1983 | Webbing, Low Modulus Aramid, 1-1/4 (32) Wide, 800 (3,559) Breaking Strength, Herringbone Twill | 1983-10-01 | |||
| SAE AMS 3798/10C-2015 | Webbing, Low Modulus Aramid, 1 (25) Wide, 6000 (26,689) Breaking Strength, Herringbone Twill | 2015-04-14 | |||
| SAE AMS 3798/10A-1989 | Webbing, Low Modulus Aramid, 1 (25) Wide, 6,000 (26,689) Breaking Strength, Herringbone Twill | 1989-04-01 | |||
| SAE AMS 3798/10-1983 | Webbing, Low Modulus Aramid, 1 (25) Wide, 6,000 (26,689) Breaking Strength, Herringbone Twill | 1983-10-01 | |||
| SAE AMS 3348D-2014 | Silicone (VMQ) Rubber 1150 Psi (7.93 MPa) Tensile Strength, High Resiliency 25-35 | 2014-05-27 | |||
| SAE AMS 3347C-2014 | Rubber, Silicone 1200 Psi (8.27 Mpa), High Modulus 45-55 | 2014-05-08 | |||
| SAE AMS 3347A-1986 | Rubber, Silicone 1200 Psi (8.27 Mpa), High Modulus 45-55 | 1986-01-01 | |||
| SAE AMS 3347-1967 | Rubber, Silicone 1200 Psi (8.27 Mpa), High Modulus 45-55 | 1967-04-01 | |||
| SAE AMS 3345F-2015 | Silicone Rubber, 1000 psi (6.89 MPa) Minimum Tensile Strength, 45 - 55 Durometer | 2015-03-12 | |||
| SAE AMS 3345C-1976 | Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55 | 1976-07-01 | |||
| SAE AMS 3345B-1965 | Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55 | 1965-02-01 | |||
| SAE AMS 3345A-1961 | Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55 | 1961-07-01 | |||
| SAE AMS 3345-1956 | Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55 | 1956-07-01 | |||
| SAE AMS 5393G-2007 | Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.0Cr - 20Ni (2.4 - 2.8C), Stress Relieved | 2007-04-13 | |||
| SAE AMS 5359E-2007 | Steel Castings, Sand, Corrosion and Heat Resistant, 15cr 4.0ni 2.3mo 0.08n, Solution Heat Treated | 2007-03-07 | |||
| SAE AMS 5373C-2011 | Alloy Castings, Sand, Corrosion and Heat Resistant, 60Co - 29Cr - 4.5W, as Cast | 2011-08-10 | |||
| SAE AMS 5373B-1981 | Alloy Castings, Sand, Corrosion and Heat Resistant, 60Co - 29Cr - 4.5W, as Cast | 1981-04-01 | |||
| SAE AMS 5373A-1951 | Alloy Castings, Sand, Corrosion and Heat Resistant, 60Co - 29Cr - 4.5W, as Cast | 1951-06-01 | |||
| SAE AMS 5373-1948 | Alloy Castings, Sand, Corrosion and Heat Resistant, 60Co - 29Cr - 4.5W, as Cast | 1948-03-01 | |||
| SAE AMS 5369E-2007 | Steel Castings, Sand, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.50 (Cb+Ta) - 0.32Ti Solution and Precipitation Heat Treated | 2007-03-07 | |||
| SAE AMS 5369B-1977 | Steel Castings, Sand, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.50 (Cb+Ta) - 0.32Ti Solution and Precipitation Heat Treated | 1977-01-01 | |||
| SAE AMS 5369A-1950 | Steel Castings, Sand, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.50 (Cb+Ta) - 0.32Ti Solution and Precipitation Heat Treated | 1950-06-01 | |||
| SAE AMS 5369-1948 | Steel Castings, Sand, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.50 (Cb+Ta) - 0.32Ti Solution and Precipitation Heat Treated | 1948-03-01 | |||
| SAE AMS 1382-1985 | Oxide Remover Compound, Acidic Aircraft Turbine Engine Components | 1985-04-01 |
若您对上表中数据有任何疑问，请与网站联系。
