（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| SJGF152-2015 | 自制拉管系统安装大管径PCCP管道施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF153-2015 | 采用焊接变位机配合埋弧自动焊机焊接PCCP管配件承插口施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF154-2015 | 桥梁下部混凝土结构冬期施工保温防护施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF155-2015 | 道路维修改造临时用钢板桥施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF156-2015 | 净空受限进行钢梁吊装施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF157-2015 | 可周转预制道路的施工工法 | 2015-10-20 | 2015-10-20 | ||
| SAE AS 1477B-2014 | Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 45° to 90° | 2014-11-05 | |||
| SJGF158-2015 | 切削式全护筒跟进施工工法 | 2015-10-20 | 2015-10-20 | ||
| SAE AS 1477-1979 | Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 45° to 90° | 1979-04-01 | |||
| SJGF159-2015 | 盾构机穿越大范围孤石群及基岩突起施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF160-2015 | 托架式内模支撑系统施工工法 | 2015-10-20 | 2015-10-20 | ||
| SAE AS 1474B-2014 | Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to 45° | 2014-11-04 | |||
| SJGF161-2015 | 盾构机二次到达接收施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF162-2015 | 超近距离盾构隧道施工工法 | 2015-10-20 | 2015-10-20 | ||
| SAE AS 1474-1979 | Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to 45° | 1979-04-01 | |||
| SJGF163-2015 | 大型变电站GIS安装施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF164-2015 | 沥青储油罐结构安装施工工法 | 2015-10-20 | 2015-10-20 | ||
| SJGF165-2015 | 螺旋风管钢索吊架施工工法 | 2015-10-20 | 2015-10-20 | ||
| EN ISO 14577-2:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) | 2015-07-29 | |||
| EN 10079:1992 | Definition of steel products | 1992-10-21 | 2007-03-14 | ||
| SAE AS 7100/1B-2008 | National Aerospace and Defense Contractors Accreditation Program (NADCAP) Survey Checklists for the NDT Suppliers Accreditation Program | 2008-08-13 | |||
| SAE AS 7100/1-1990 | National Aerospace and Defense Contractors Accreditation Program (NADCAP) - Survey Checklists for the NDT Suppliers Accreditation Program | 1990-07-01 | |||
| EN 10083-1:1991 + A1:1996 | Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996) | 1996-08-21 | 2006-08-09 | ||
| SAE AMS 3359A-1987 | Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 200 to 400 Poise (20 to 40 Pa?s) Viscosity | 1987-01-01 | |||
| SAE AMS 3359-1976 | Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 200 to 400 Poise (20 to 40 Pa?s) Viscosity | 1976-01-15 | |||
| EN 10083-3:1995 | Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels | 1995-09-15 | 2006-08-02 | ||
| EN 10083-3:2006/AC:2008 | Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels | 2008-10-08 | |||
| SAE AMS 5514F-1992 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1992-10-01 | |||
| SAE AMS 5514D-1985 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1985-04-01 | |||
| SAE AMS 5514E-1991 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1991-04-01 | |||
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | 2014-10-22 | |||
| SAE AMS 5514C-1978 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1978-01-01 | |||
| SAE AMS 5514B-1971 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1971-05-01 | |||
| SAE AMS 5514A-1952 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1952-02-01 | |||
| SAE AMS 5514-1947 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | 1947-12-01 | |||
| SAE AMS 7726E-1996 | Iron-Nickel-Cobalt Alloy, Wire 53Fe-29Ni-17Co Low Expansion, Glass Sealing, Annealed | 1996-06-01 | |||
| EN 10088-3:1995 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes | 1995-04-26 | 2005-06-08 | ||
| EN 10163-1:1991 | Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General requirements | 1991-08-21 | 2004-12-08 | ||
| SAE AMS 3787/6-1986 | Thread, Para-Aramid Intermediate Modulus 950 yards per pound (1915 m/kg), 150 Pounds Force (667 N) Breaking Strength | 1986-04-01 | |||
| EN 10163-1:2004/AC:2007 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements | 2007-02-21 | |||
| SAE AS 9679B-2014 | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A | 2014-08-20 | |||
| SAE AS 9678B-2014 | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A | 2014-08-20 | |||
| SAE AS 39029/23A-2013 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 1 CONNECTORS) | 2013-12-02 | |||
| EN 10163-3:1991 | Delivery requirements for surface condition of hot rolled steel plates and sections - Part 3: Sections | 1991-08-21 | 2004-12-08 | ||
| SAE ARP 4737 SUP 1A-2004 | Aircraft Deicing/Anti-Icing Methods (Supplement 1) | 2004-01-13 | |||
| SAE J 2276-1995 | Numbering System for Multiple Diameter Cutting Tools | 1995-09-01 | |||
| SAE AS 39029/104A-2011 | Contacts, Electrical Connector, Concentric Twinax, Pin, Shielded, Size 8 (For MIL-C-28840) | 2011-08-09 | |||
| SAE AS 5205A-2002 | Nut, Fitting, Engine, Flared | 2002-05-08 | |||
| EN 10203:1991 | Cold reduced electrolytic tinplate | 1991-08-21 | 2001-03-21 | ||
| EN 10202:1989 | Cold reduced electrolytic chromium/chromium oxide coated steel | 1989-04-01 | 2001-03-21 |
若您对上表中数据有任何疑问，请与网站联系。
