（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 738-2:1998 | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators | 1998-10-21 | 2006-04-26 | ||
| SAE AS 24001A-2014 | FUSE HOLDER, BLOCK-TYPE, 1-, 2-, 3-POLE, 35- TO 60-AMPERE, AIRCRAFT | 2014-10-06 | |||
| SAE AS 24654A-2014 | ELBOW, TUBE - 45°, BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE | 2014-06-17 | |||
| EN ISO 14931:2015 | Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931:2015) | 2015-03-04 | |||
| SAE AS 9228A-2014 | BRACKET, ANGLE, 90° .190 BOLT | 2014-02-06 | |||
| SAE AS 9784A-2014 | BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .2500-28 UNJF-3A | 2014-12-01 | |||
| EN 13220:1998 | Flow-metering devices for connection to terminal units of medical gas pipeline systems | 1998-10-21 | 2008-07-01 | ||
| SAE AS 9788A-2015 | BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .5000-20 UNJF-3A | 2015-06-12 | |||
| SAE AS 2001-1998 | Aerospace Fluid Systems and Components-Pressure and Temperature Classifications | 1998-03-01 | |||
| SAE AMS 9226A-2006 | Wire - Steel, Corrosion and Heat Resistant, Safety, 1800°F | 2006-01-26 | |||
| SAE AS 5355/3A-2015 | COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 °F) | 2015-08-28 | |||
| EN ISO 7438:2000 | Metallic materials - Bend test (ISO 7438:1985) | 2000-01-19 | 2005-06-15 | ||
| SAE J 1470-2013 | Measurement of Noise Emitted by Accelerating Highway Vehicles | 2013-11-07 | |||
| SAE J 1470-1992 | Measurement of Noise Emitted By Accelerating Highway Vehicles | 1992-03-01 | |||
| SAE J 1470-1984 | Measurement of Noise Emitted by Accelerating Highway Vehicles | 1984-10-01 | |||
| EN ISO 7500-2:1999 | Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load (ISO 7500-2:1996) | 1999-06-23 | 2006-12-15 | ||
| EN ISO 7539-7:1995 | Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989) | 1995-06-14 | 2005-02-01 | ||
| EN 578:1993 | Plastics piping systems - Plastics pipes and fittings - Determination of the opacity | 1993-07-02 | 2005-07-01 | ||
| ISO 15848-1:2015(E) | Industrial valves — Measurement,test and qualification procedures for fugitive emissions—Part1:Classification system and qualification procedures for type testing of valves | 2015-06-01 | |||
| EN ISO 1567:2000 | Dentistry - Denture base polymers (ISO 1567:1999) | 2000-04-19 | 2005-07-15 | ||
| EN ISO 1567:1995 | Dentistry - Denture base polymers (ISO 1567:1988) | 1995-01-12 | 2000-04-19 | ||
| EN ISO 12163:2000 | Dental baseplate/modelling wax (ISO 12163:1999) | 2000-08-23 | 2005-07-15 | ||
| EN ISO 16047:2005/A1:2012 | Fasteners - Torque/clamp force testing (ISO 16047:2005/Amd 1:2012) | 2012-09-15 | |||
| EN 993-20:2004 | Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature | 2004-05-26 | 2008-05-07 | ||
| EN ISO 8442-2:1997/AC:2006 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997) | 2006-06-21 | |||
| EN ISO 8442-2:1997/AC:1999 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997) | 1999-04-22 | |||
| SAE AMS 3136D-1989 | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150°C (302°F) Cure | 1989-10-01 | |||
| SAE AMS 3136C-1984 | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150°C (302°F) Cure | 1984-01-01 | |||
| SAE AMS 3136B-1976 | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150°C (302°F) Cure | 1976-01-01 | |||
| EN ISO 8469:2013 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) | 2013-07-24 | |||
| SAE AMS 3136A-1966 | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150°C (302°F) Cure | 1966-09-01 | |||
| SAE AMS 3136-1962 | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150°C (302°F) Cure | 1962-01-01 | |||
| EN ISO 8469:1995 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:1994) | 1995-04-21 | 2006-07-01 | ||
| EN ISO 8469:1995/A1:2000 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:1994) | 2000-09-20 | |||
| SAE AMS 3267/2B-2003 | Sealing Compound, Low Adhesion, Corrosion Inhibiting, 9,000 to 14,000 Poises (900 to 1400 Pa?s), 1/2 Hour Application Time (B-1/2) | 2003-04-24 | |||
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) | 2013-11-20 | |||
| EN 10233:1993 | Metallic materials - Tube - Flattening test | 1993-10-29 | 2004-07-21 | ||
| SAE AMS 4508F-1989 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1989-07-01 | |||
| SAE AMS 4508E-1983 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1983-07-01 | |||
| SAE AMS 4508D-1978 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1978-10-16 | |||
| SAE AMS 4508C-1969 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1969-11-01 | |||
| SAE AMS 4508B-1951 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1951-10-01 | |||
| SAE AMS 4508A-1951 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1951-03-01 | |||
| SAE AMS 4508-1948 | Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded | 1948-05-01 | |||
| SAE AS 3071A-1995 | Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection | 1995-05-01 | |||
| SAE AS 3071-1971 | Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection | 1971-10-01 | |||
| SAE AS 5198B-2003 | Fitting, Tee, Flared to Pipe on Run | 2003-08-06 | |||
| SAE AS 5198-1999 | Fitting, Tee, Flared to Pipe on Run | 1999-04-01 | |||
| SAE AMS 5669A-2008 | Alloy Bars, Corrosion and Heat Resistant, Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe, Consumable Electrode or Vacuum Induction Melted | 2008-11-26 | |||
| SAE AMS 5657C-2012 | Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant, 15Cr - 7.1Ni - 2.5Mo - 1.1Al | 2012-10-12 |
若您对上表中数据有任何疑问，请与网站联系。
