检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NASM51031-2010 SETSCREW, HEXAGON SOCKET, FLAT POINT, CORROSION RESISTING STEEL, PASSIVATED, UNF-3A, PLAIN AND SELF-LOCKING Rev 1 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380] [Superseded: DLA MS51031 REV B CANC NOTICE 1, DLA MS51031 REV B
AIA/NAS NAS495-2011 BOLT, INTERNAL WRENCHING, STEEL, HIGH TENSILE AND HIGH FATIGUE STRENGTH Rev 4 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NASM20004-20024, AIA/NAS NASM20004-20024, AIA/NAS NASM20004-20024]
AIA/NAS NAS1051-2010 SAFETY HOOK, FORGED CARBON STEEL, SNAP, DIRECT EYE (FOR GROUND SUPPORT EQUIPMENT) Rev 3
AIA/NAS NASM21083-2011 NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 癋 Rev 2 [Superseded: DLA MS21083 REV H CANC NOTICE 1, DLA MS21083 REV H, DLA MS21083 REV G, DLA MS21083 REV F, DLA MS21083 REV E, DLA MS21083 REV D, DLA MS21083 REV C, DLA MS21083
AIA/NAS NA0033-0034-2010 Nut, Self-Locking, Hexagon Extended Washer 1100 MPa, Metric, 235 Degrees C and 425 Degrees C Rev 3
AIA/NAS NASM51976-2012 SETSCREW, HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3A Rev 1 [Superseded: DLA MS51976 REV A CANC NOTICE 2, DLA MS51976 REV A VALID NOTICE 1, DLA MS51976 REV A]
AIA/NAS NASM77073-2010 TERMINAL, LUG, SOLDER TYPE, PHOSPHOR BRONZE STAMPING, LOCKING TYPE FLAT, ONE HOLE Rev 1 [Superseded: DLA MS77073 CANC NOTICE 2, DLA MS77073 NOTICE 1, DLA MS77073]
AIA/NAS NASM21299-2010 WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUDING 260 KSI Ftu Rev 2 [Superseded: DLA MS21299 REV A CANC NOTICE, DLA MS21299 REV A, DLA MS21299]
AIA/NAS NAS543-1992 Switch-One Hole Mounting Single Pole Toggle Rev 3
AIA/NAS NASM24661-2012 RIVET, BLIND, COUNTERSUNK HEAD, DRIVE TYPE Rev 1 [Superseded: DLA MS24661 REV C CANC NOTICE 1, DLA MS24661 REV C, DLA MS24661 REV B, DLA MS24661 REV A, DLA MS24661]
AIA/NAS NA0091-2010 SCREW, 100?FLUSH HEAD, OFFSET CRUCIFORM RECESS, FULL THREAD, ALLOY STEEL, 1100 MPa Ftu, METRIC Rev 3
AIA/NAS NASM21074-2011 NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI Ftu, 450 癋& 800 癋 Rev 1 [Superseded: DLA MS21074 REV F CANC NOTICE 1, DLA MS21074 REV F, DLA MS21074 REV E, DLA MS21074 REV D, DLA MS21074 REV C]
AIA/NAS NAS1299-2010 SCREW, 100 Degrees FLAT HEAD, SHOULDE Rev 3
AIA/NAS NASM33602-2011 BOLTS, SELF-RETAINING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY, DESIGN AND USAGE REQUIREMENTS FOR Rev 1 [Superseded: DLA MS33602 CANC NOTICE 2, DLA MS33602 VALID NOTICE 1, DLA MS33602]
AIA/NAS NAS1063-2011 STRIP, HIGH TEMPERATURE TERMINAL BLOCK, BASE INSULATING Rev 4
AIA/NAS NAS1565-2012 Reducer, Flareless Tube Rev 1
AIA/NAS NASM20600-2011 RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, PROTRUDING HEAD, TYPE II Rev 1 [Superseded: DLA MS20600 REV J CANC NOTICE 1, DLA MS20600 REV J, DLA MS20600 REV H, DLA MS20600 REV G, DLA MS20600 REV F, DLA MS20600 REV E, DLA MS20600 REV D, DLA M
AIA/NAS NASM17732-2012 FASTENER, ROTARY, QUICK-OPERATING, PROTRUDING HEAD, FLOATING TYPE, 2,210 LBF MIN TENSILE STRENGTH Rev 1 [Superseded: DLA MS17732 REV C CANC NOTICE 2, DLA MS17732 REV C VALID NOTICE 1, DLA MS17732 REV C]
AIA/NAS NAS1716-2011 CLAMP, LOOP, CUSHIONED, SADDLE Rev 4
AIA/NAS NAS176-2002 Bolt-Internal Wrenching-Steel 1.5000-12 Rev 9
AIA/NAS NA0116-2010 Angle, Bulb, Extruded, Aluminum Alloy, Metric Rev 2
AIA/NAS NASM21057-2011 NUT, SELF-LOCKING, PLATE, CORNER, 100?CSK, LOW HEIGHT, ALLOY STEEL, 125 KSI Ftu, 450 癋 Rev 1 [Superseded: DLA MS21057 REV G CANC NOTICE 1, DLA MS21057 REV G, DLA MS21057 REV F, DLA MS21057 REV E, DLA MS21057 REV D, DLA MS21057 REV C]
AIA/NAS NA0165-1989 Post, Electrical- Mechanical Equipment Swage Type, Metric Rev 2 [Refer To: AIA/NAS NA0211-0213]
AIA/NAS NASM51834-2011 STUD, LOCKED IN, KEY-LOCKED, HEAVY DUTY Rev 1 [Superseded: DLA MS51834 REV E CANC NOTICE 1, DLA MS51834 REV E (1), DLA MS51834 REV E, DLA MS51834 REV D, DLA MS51834 REV C, DLA MS51834 REV B, DLA MS51834 REV A, DLA MS51834]
AIA/NAS NA0128-2012 SCREW, CAPTIVE, 100?FLUSH HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC Rev 2
AIA/NAS NAS1922-2011 CLAMP, HOSE, BAND, TANGENTIAL WORM, LIGHT WEIGHT Rev 4
AIA/NAS NASM21295-2011 SCREWS, SELF LOCKING, 250 掳F, CYLINDRICAL HEAD, HEXAGONAL WRENCHING SOCKET, CRES, 80 KSI Ftu, (SOCKET HEAD CAP SCREWS) Rev 1 [Superseded: DLA MS21295 REV A CANC NOTICE 2, DLA MS21295 REV A VALID NOTICE 1, DLA MS21295 REV A]
AIA/NAS NASM20652-2012 EYELETS, METALLIC, AND EYELET WASHERS, METALLIC Rev 1 [Superseded: DLA MIL-E-20652 F CANC NOTICE 1, DLA MIL-E-20652 F (1), DLA MIL-E-20652 F, DLA MIL-E-20652 E, DLA MIL-E-20652 D, DLA MIL-E-20652 C]
AIA/NAS NAS662-2010 SCREW, MACHINE, FLAT 100 DEGREE HEAD, PLAIN AND SELF-LOCKING Rev 12
AIA/NAS NAS72-2011 BUSHING, CLAMP-UP, STEEL, CHROME PLATED Rev 7
AIA/NAS NASM1312-31-2011 FASTENER TEST METHODS METHOD 31 TORQUE Rev 1 [Superseded: NAVY MIL-STD-1312 -31 CANC NOTICE 1, NAVY MIL-STD-1312 -31]
AIA/NAS NAS1511-1980 Heat Treatment and Processing Requirements for 5 Percent Cr Ultra High Strength Alloy Steel (H-11) Fasteners Rev 1 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM14493-2012 NUT, SELF-LOCKING, CHANNEL, FLOATING, CARBON STEEL, 125 KSI Ftu Rev 1 [Superseded: DLA MS14493 CANC NOTICE 1, DLA MS14493]
AIA/NAS NA0237-0238-2012 INSERT, SANDWICH PANEL, MOLDED IN, THRU CLEARANCE, AL ALLOY/CRES, METRIC Rev 2
AIA/NAS NAS576-2012 THREAD LENGTH FOR SELF-LOCKING NUTS Rev 3
AIA/NAS NASM16491/1-2011 GROMMET, METALLIC, PLAIN, WITH TOOTHED WASHER, TYPE II Rev 1 [Superseded: DLA MIL-G-16491/1 CANC NOTICE 1, DLA MIL-G-16491/1]
AIA/NAS NAS1729-2012 FASTENER, SHEAR, PROTRUDING HEAD, TAPERED SHANK (TS), OVERSIZE, 95 KSI Fsu, 108 KSI Fsu, 110 KSI Fsu, 125 KSI Fsu, 132 KSI Fsu& 156 KSI Fsu Rev 3
AIA/NAS NAS1271-1280-2011 BOLT, TWELVE POINT, EXTERNAL WRENCHING, TITANIUM ALLOY Rev 8
AIA/NAS NAS4-1946 End - Rod, Control, Resistance Welding Type, X1020 Steel Rev 1 [Refer To: AIA/NAS NAS5]
AIA/NAS NAS356-2011 TUBE ASSEMBLY, CONTROL, ALUMINUM ALLOY, WITH RIVETED CLEVIS AND THREADED ROD ENDS Rev 8
AIA/NAS NA0038-2011 SCREW, CLOSE TOLERANCE, 100掳 FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC Rev 4
AIA/NAS NASM91523-2012 KNOB, CONTROL, LEVER, METAL Rev 1 [Superseded: DLA MS91523 REV B CANC NOTICE 3, DLA MS91523 REV B NOTICE 2, DLA MS91523 REV B VALID NOTICE 1, DLA MS91523 REV B, DLA MS91523 REV A, DLA MS91523]
AIA/NAS NASM45595/4-2011 WASHER, SADDLE, CARBON STEEL Rev 1 [Superseded: DLA MIL-W-45595/4 CANC NOTICE 1, DLA MIL-W-45595/4]
AIA/NAS NAS558-2011 KEYS, SQUARE AND RECTANGULAR Rev 6
AIA/NAS NAS26-1980 Trunnion-Tank Strap, Unthreaded Rev 6 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM1312-1-2010 FASTENER TEST METHODS METHOD 1 ?SALT SPRAY Rev 1 [Superseded: NAVY MIL-STD-1312 -1 CANC NOTICE 1, NAVY MIL-STD-1312 -1]
AIA/NAS NASM24671-2010 SCREW, CAP, SOCKET HEAD, FLAT COUNTERSUNK, 82 DEGREES, CORROSION-RESISTING STEEL, UNC-3A Rev 1 [Superseded: DLA MS24671 REV C CANC NOTICE 1, DLA MS24671 REV C (1), DLA MS24671 REV C, DLA MS24671 REV B, DLA MS24671 REV A, DLA MS24671]
AIA/NAS NAS1290-2012 PROCUREMENT SPECIFICATION, THREADED SHEAR FASTENER, FLUSH& PROTRUDING TYPE FOR APPLICATIONS UP TO 1,400 癋, CORROSION AND HEAT RESISTANT NICKEL BASE ALLOY Rev 3
AIA/NAS NAS474-1951 Bracket - Angle Speed Nut Rev 1
AIA/NAS NASM21387-2011 KNOB, ROUND ILLUMINATED AND NON-ILLUMINATED, SMALL Rev 1 [Superseded: DLA MS21387 REV E CANC NOTICE 2, DLA MS21387 REV E NOTICE 1, DLA MS21387 REV E, DLA MS21387 REV D, DLA MS21387 REV C, DLA MS21387 REV B, DLA MS21387 REV A, DLA MS21387]
776140 条记录 10952/15523 页 第一页 <上一页  10948   10949   10950   10951  10952  10953   10954   10955   10956  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。