检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NAS495-2002 Bolt-Internal Wrenching-Steel (High Tensile and High Fatigue Strength) Rev 3
AIA/NAS NA0059-2011 BOLT, TENSION, CLOSE TOLERANCE, SPLINE DRIVE, A286 CRES, 1250 MPa, METRIC Rev 3
AIA/NAS NAM14290-2012 CLAMP, LOOP, CUSHIONED, RECTANGULAR, METRIC Rev 1 [Superseded: DLA DS14290 CANC NOTICE 3, DLA DS14290 CANC NOTICE 2, DLA DS14290 VALID NOTICE 1, DLA DS14290]
AIA/NAS NASM18063-2012 SETSCREW, HEXAGON SOCKET, CUP POINT, 250 癋, SELF LOCKING ELEMENT, ALLOY STEEL, CADMIUM PLATED Rev 1 [Superseded: DLA MS18063 REV A CANC NOTICE 2, DLA MS18063 REV A VALID NOTICE 1, DLA MS18063 REV A]
AIA/NAS NASM33547-2011 PINS, SPRING, FUNCTIONAL LIMITATIONS OF Rev 1 [Superseded: DLA MS33547 REV C CANC NOTICE 2, DLA MS33547 REV C VALID NOTICE 1, DLA MS33547 REV C]
AIA/NAS NASM20002-2010 WASHER, COUNTERSUNK AND PLAIN, HIGH STRENGTH Rev 2 [Superseded: DLA MS20002 REV E CANC NOTICE 2, DLA MS20002 REV E VALID NOTICE 1, DLA MS20002 REV E, DLA MS20002 REV C]
AIA/NAS NAM14289-2012 STRAP, RETAINING, CUSHIONED, RECTANGULAR, TWO-PIECE, METRIC Rev 1 [Superseded: DLA DS14289 CANC NOTICE 2, DLA DS14289 CANC NOTICE 1, DLA DS14289]
AIA/NAS NAS559-2011 Lock-Rod End (Key Type) Rev 5 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380] [Superseded By: AIA/NAS NASM14198]
AIA/NAS NAS4458-2012 PIN, CRIMP, PROTRUDING TENSION HEAD Rev 2
AIA/NAS NASM20074-2010 BOLT, MACHINE, AIRCRAFT, DRILLED HEAD, COARSE THREAD Rev 2 [Superseded: DLA MS20074 REV B CANC NOTICE 2, DLA MS20074 REV B VALID NOTICE 1, DLA MS20074 REV B, DLA MS20074 REV A]
AIA/NAS NA0075-0076-2011 NUT, CAPTIVE WASHER, SHEAR TYPE, SELF-LOCKING CBORED, 1100 MPa, METRIC, 235 掳C AND 425 掳C Rev 2
AIA/NAS NAS1217-2001 Bolt, Pan Head Hi-Torque Recess, Short Thread Rev 7 [Refer To: AIA/NAS NAS1218, AIA/NAS NAS1218, AIA/NAS NAS1578, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM21225-2011 NUT, SELF-LOCKING, CASTELLATED, HEXAGON, 800 癋 Rev 1 [Superseded: DLA MS21225 REV A CANC NOTICE 1, DLA MS21225 REV A (1), DLA MS21225 REV A]
AIA/NAS NA0250-2012 BEARING, PLAIN, SELF LUBRICATING, SELF-ALIGNING LOW SPEED, WIDE, CHAMFERED OUTER RING, -54 癈 TO 163 癈, METRIC Rev 1
AIA/NAS NASM35812-2011 CLEVIS, ROD END, ADJUSTABLE AND PLAIN, STEEL Rev 1 [Superseded: DLA MS35812 REV E CANC NOTICE 1, DLA MS35812 REV E, DLA MS35812 REV D, DLA MS35812 REV C, DLA MS35812 REV B, DLA MS35812 REV A]
AIA/NAS NAS1097-2012 RIVET, SOLID, 100?FLUSH SHEAR HEAD, ALUMINUM ALLOY, TITANIUM COLUMBIUM ALLOY Rev 10
AIA/NAS NAS9300-002-2012 LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA PART 002: REQUIREMENTS
AIA/NAS NAS1060-2012 BUS, HIGH TEMPERATURE, TERMINAL BLOCK Rev 3
AIA/NAS NAS1160-2011 BOLT, SHOULDER, HEX HEAD, CLOSE TOLERANCE, CRES-A286, 95 KSI Fsu Rev 5
AIA/NAS NASM3926/4-2012 KNOBS, CONTROL, ROUND, EDGE LIGHTED AND NON-EDGE LIGHTED Rev 1 [Superseded: DLA MIL-K-3926/4 CANC NOTICE 2, DLA MIL-K-3926/4 NOTICE 1, DLA MIL-K-3926/4]
AIA/NAS NASM1312-21-2012 FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE, CONSTANT AMPLITUDE Rev 2 [Superseded: NAVY MIL-STD-1312 -21 CANC NOTICE 1, NAVY MIL-STD-1312 -21]
AIA/NAS NAS1412-2011 GASKET, SEALING, CUSTOM DESIGN Rev 3
AIA/NAS NASM7874-2012 BOLT, MACHINE, 1,200 癋 Rev 1 [Superseded: DLA MIL-B-7874 B CANC NOTICE 1, DLA MIL-B-7874 B (1), DLA MIL-B-7874 B SUPP 1, DLA MIL-B-7874 B, DLA MIL-B-7874 A, DLA MIL-B-7874]
AIA/NAS NAS1871-2011 NUT ASSEMBLY, TORQUE LIMITING, 600 癋 APPLICATION, .2500-28 UNJF-3B THREAD Rev 3 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NAS1721-2011 RIVET, BLIND, 100?FLUSH HEAD (NASM20426 HEAD), MECHANICALLY LOCKED SPINDLE Rev 3
AIA/NAS NA0168-0169-2012 INSERT, MOLDED-IN, THRU CLEARANCE HOLE, SANDWICH PANEL, AL ALLOY AND CRES, METRIC Rev 2
AIA/NAS NAS513-2011 WASHER ?ROD END, LOCKING Rev 7
AIA/NAS NAS1575-2012 COVER, SWITCH FITTING BOX, WEATHERPROOF Rev 2
AIA/NAS NASM20073-2010 BOLT, MACHINE, AIRCRAFT, DRILLED HEAD, FINE THREAD Rev 1 [Superseded: DLA MS20073 REV B CANC NOTICE 2, DLA MS20073 REV B VALID NOTICE 1, DLA MS20073 REV B, DLA MS20073 REV A, DLA MS20073]
AIA/NAS NASM21097-2012 BOLT, SELF-LOCKING, 250 癋, CRES, 48 KSI Fsu, 80 KSI Ftu, PAN HEAD, CRUCIFORM RECESS Rev 1 [Superseded: DLA MS21097 REV E CANC NOTICE 1, DLA MS21097 REV E, DLA MS21097 REV D, DLA MS21097 REV C, DLA MS21097 REV B]
AIA/NAS NAS850-2012 GENERAL PACKAGING STANDARD Rev 7
AIA/NAS NASM14198-2011 LOCK, ROD END, EXTRA STRENGTH, HIGH PROFILE LUG Rev 1 [Superseded: DLA MS14198 REV A CANC NOTICE 1, DLA MS14198 REV A, DLA MS14198]
AIA/NAS NASM20426-2009 RIVET, SOLID, COUNTERSUNK 100? PRECISION HEAD, ALUMINUM AND TITANIUM COLUMBIUM ALLOY Rev 2
AIA/NAS NAS1197-2010 WASHER, 5052 ALUMINUM ALLOY Rev 3
AIA/NAS NAS1352-2009 SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRC-3A AND UNRC-2A Rev 11
AIA/NAS NAS1266-1270-2010 BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, TITANIUM ALLOY, 160 KSI Ftu Rev 7
AIA/NAS NAS1616-1981 Topcoat, Water Reducible Rev 1
AIA/NAS NA0162-2011 SETSCREW, HEXAGON SOCKET, CUP POINT, A286 CRES, METRIC Rev 3
AIA/NAS NASM3212-2011 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS3212 REV B CANC NOTICE 2, DLA MS3212 REV B VALID NOTICE 1, DLA MS3212 REV B, DLA MS3212 REV A, DLA MS3212]
AIA/NAS NASM24628-2011 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T, FLAT 82?COUNTERSUNK HEAD, CRUCIFORM-RECESSED, CRES Rev 1 [Superseded: DLA MS24628 REV C CANC NOTICE 3, DLA MS24628 REV C VALID NOTICE 2, DLA MS24628 REV C VALID NOTICE 1, DLA MS24628 REV C, DLA MS24
AIA/NAS NA0243-2012 INSERT, SANDWICH PANEL, MOLDED IN, BLIND THREADED, SELF-LOCKING, CRES, METRIC Rev 1
AIA/NAS NAS940-2012 PRESS ?HYDRAULIC DIRECT ACTING INTERNAL EXPANSION Rev 2
AIA/NAS NAS551-2011 Bolt - Universal Fitting Rev 7
AIA/NAS NASM17829-2012 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 癋, NON-METALLIC INSERT, NON-CRES STEEL Rev 1 [Superseded: DLA MS17829 REV E CANC NOTICE 2, DLA MS17829 REV E VALID NOTICE 1, DLA MS17829 REV E, DLA MS17829 REV D]
AIA/NAS NASM45938/14-2012 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH, SELF-CLINCHING, KNURLED COLLAR, FLOATING, 450 癋 AND 600 癋 Rev 1 [Superseded: DLA MIL-N-45938/14 CANC NOTICE 2, DLA MIL-N-45938/14 VALID NOTICE 1, DLA MIL-N-45938/14]
AIA/NAS NAS520-2010 COUPLING, FLEXIBLE, LOW PRESSURE, 450 DEGREES F AIR LINE Rev. 2
AIA/NAS NAS9311-2011 RIVET, BLIND, 100?FLUSH HEAD, MECHANICALLY LOCKED SPINDLE, BULBED, STYLE B, CLASS 2, CODE M& C Rev 4
AIA/NAS NASM20004-20024-2010 BOLTS, INTERNAL WRENCHING, 160 KSI FTU AND 96 KSI FSU Rev 3 [Superseded: DLA MS20004 THRU MS20024 REV E CANC NOTICE 1, DLA MS20004 THRU MS20024 REV E, DLA MS20004 THRU MS20024 REV D, DLA MS20004 THRU 20024 REV C]
AIA/NAS NASM27384-2011 RIVET, BLIND, DRIVE TYPE Rev 1 [Superseded: DLA MIL-R-27384 B CANC NOTICE 1, DLA MIL-R-27384 B, DLA MIL-R-27384 A, DLA MIL-R-27384]
AIA/NAS NASM51850-2012 SCREW, TAPPING, THREAD FORMING, TYPE AB, HEXAGON HEAD, SLOTTED Rev 1 [Superseded: DLA MS51850 CANC NOTICE 3, DLA MS51850 VALID NOTICE 2, DLA MS51850 VALID NOTICE 1, DLA MS51850]
776140 条记录 10953/15523 页 第一页 <上一页  10949   10950   10951   10952  10953  10954   10955   10956   10957  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。