（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NASM21385-2011 | KNOBS, TACTILE SERIES, ILLUMINATED AND NON-ILLUMINATED Rev 1 [Superseded: DLA MS21385 REV E CANC NOTICE 2, DLA MS21385 REV E NOTICE 1, DLA MS21385 REV E, DLA MS21385 REV D, DLA MS21385 REV C, DLA MS21385 REV B, DLA MS21385 REV A, DLA MS21385] | ||||
| AIA/NAS NAS617-2010 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, SYNTHETIC LUBRICANT RESISTANT Rev 3 | ||||
| AIA/NAS NASM27576-2012 | BOLT, SELF-RETAINING, IMPEDANCE TYPE, 95 KSI Fsu, HEX HEAD, 450 癋 Rev 3 [Superseded: DLA MS27576 REV E CANC NOTICE 1, DLA MS27576 REV E, DLA MS27576 REV D, DLA MS27576 REV C] | ||||
| AIA/NAS NAS1495-2011 | RECOMMENDED QUALIFICATION TEST PROCEDURE FOR COMPLIANCE WITH NAS SPECIFICATIONS AND STANDARD DRAWINGS Rev 2 | ||||
| AIA/NAS NASM43770/10-2012 | SNAP HOOKS, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, WIDE MOUTH Rev 1 [Superseded: DLA MIL-S-43770/10 CANC NOTICE 3, DLA MIL-S-43770/10 CANC NOTICE 2, DLA MIL-S-43770/10 VALID NOTICE 1, DLA MIL-S-43770/10] | ||||
| AIA/NAS NASM21080-2012 | NUT, SELF-LOCKING, PLATE, ONE LUG, NON-METALLIC INSERT, STEEL, 125 KSI Ftu, 250 癋 Rev 1 [Superseded: DLA MS21080 REV D CANC NOTICE 1, DLA MS21080 REV D, DLA MS21080 REV C, DLA MS21080 REV B] | ||||
| AIA/NAS NA0139-2012 | KEYWAY AND KEY SLOT DIMENSIONS METRIC Rev 1 | ||||
| AIA/NAS NAS1058-1981 | Fasteners, Blind Rev 2 | ||||
| AIA/NAS NA0089-2011 | SCREW, PAN HEAD, OFFSET CRUCIFORM RECESS, FULL THREAD, ALLOY STEEL, 1100 MPa, METRIC Rev 3 | ||||
| AIA/NAS NAS1367-2012 | FITTINGS, COATED, LUBRICANT& SEALANT Rev 9 | ||||
| AIA/NAS NASM35199-2012 | SCREW, MACHINE, 82?FLAT COUNTERSUNK HEAD, CROSS-RECESSED, BRASS, BLACK CHEMICAL FINISH, UNF-2A Rev 1 [Superseded: DLA MS35199 REV B CANC NOTICE 2, DLA MS35199 REV B (1), DLA MS35199 REV B VALID NOTICE 1, DLA MS35199 REV B, DLA MS35199] | ||||
| AIA/NAS NASM16205-2011 | BOLT, MACHINE, REGULAR SEMI-FINISHED HEXAGON HEAD, COPPER-SILICON ALLOY (SILICON BRONZE), UNC-2A, NON-MAGNETIC Rev 1 [Superseded: DLA MS16205 REV A CANC NOTICE 3, DLA MS16205 REV A VALID NOTICE 2, DLA MS16205 REV A VALID NOTICE 1, DLA MS16205 REV A] | ||||
| AIA/NAS NAS711-1968 | Rectifiers, Selenium, for Magnetic Amplifiers Rev 2 | ||||
| AIA/NAS NASM25087-2011 | SCREW, EXTERNALLY RELIEVED BODY Rev 1 [Superseded: DLA MS25087 REV B CANC NOTICE 2, DLA MS25087 REV B VALID NOTICE 1, DLA MS25087 REV B, DLA MS25087 REV A] | ||||
| AIA/NAS NASM21125-2011 | BOLT, SELF-RETAINING, POSITIVE LOCKING, CRES, 90 KSI Fsu, 63 KSI Ftu, PAN HEAD, 450 癋& 650 癋 Rev 1 [Superseded: DLA MS21125 REV F CANC NOTICE 1, DLA MS21125 REV F, DLA MS21125 REV E, DLA MS21125 REV D, DLA MS21125 REV C, DLA MS21125 REV B] | ||||
| AIA/NAS NASM47196-2012 | PREPARATION FOR AND INSTALLATION OF BUCK-TYPE RIVETS Rev 1 [Superseded: DLA MIL-R-47196 A CANC NOTICE 3, DLA MIL-R-47196 A CANC NOTICE 2, DLA MIL-R-47196 A VALID NOTICE 1, DLA MIL-R-47196 A (1), DLA MIL-R-47196 A, DLA MIL-R-47196] | ||||
| AIA/NAS NASM28728/2-2011 | DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.75 DIAMETER Rev 1 [Superseded: DLA MIL-D-28728/2 B CANC NOTICE 3, DLA MIL-D-28728/2 B NOTICE 2, DLA MIL-D-28728/2 B, DLA MIL-D-28728/2 A, DLA MIL-D-28728/2] | ||||
| AIA/NAS NASM171401-171900-2010 | Pin - Spring, Corrosion Resistant Steel Rev 2 | ||||
| AIA/NAS NAS74-2010 | BUSHING, CLAMP-UP, BRONZE Rev 6 | ||||
| AIA/NAS NASM21386-2011 | KNOBS, ROUND, CONCENTRIC ILLUMINATED AND NON-ILLUMINATED Rev 1 [Superseded: DLA MS21386 REV E CANC NOTICE 2, DLA MS21386 REV E NOTICE 1, DLA MS21386 REV E, DLA MS21386 REV D, DLA MS21386 REV C, DLA MS21386 REV B, DLA MS21386 REV A, DLA MS21386] | ||||
| AIA/NAS NAS5320-2012 | SCREW, SHEAR, 100 DEG FLUSH REDUCED HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU Rev 1 | ||||
| AIA/NAS NASM43770/12-2011 | SNAP HOOKS, CAST BODY, FIXED ROUND EYE W/O ROLLER, FLAT SPRING CLOSURE Rev 1 [Superseded: DLA MIL-S-43770/12 A CANC NOTICE 3, DLA MIL-S-43770/12 A CANC NOTICE 2, DLA MIL-S-43770/12 A VALID NOTICE 1, DLA MIL-S-43770/12 A, DLA MIL-S-43770/12] | ||||
| AIA/NAS NA0079-2012 | NUT, SELF-LOCKING, PLATE, FIXED, TWO LUG, STEEL, REDUCED RIVET SPACING, LOW HEIGHT, CBORE, 1100 MPa, METRIC, 235 癈 Rev 3 | ||||
| AIA/NAS NAS672-2012 | PLATING, HIGH STRENGTH STEELS, CADMIUM Rev 8 | ||||
| AIA/NAS NA0211-0213-2012 | POST, ELECTRICAL, MECHANICAL EQUIPMENT, SWAGE TYPE, METRIC Rev 2 | ||||
| AIA/NAS NAS1728-2011 | FASTENER, SHEAR, PROTRUDING HEAD, TAPERED SHANK (TS), 95 KSI Fsu, 108 KSI Fsu, 110 KSI Fsu, 125 KSI Fsu, 132 KSI Fsu,& 156 KSI Fsu Rev 3 | ||||
| AIA/NAS NASM28728-2012 | DIAL, CONTROL, MULTI-TURN COUNTERS, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-D-28728 B CANC NOTICE 2, DLA MIL-D-28728 B NOTICE 1, DLA MIL-D-28728 B VALID NOTICE 1, DLA MIL-D-28728 B, DLA MIL-D-28728 A SUPP 1, DLA MIL-D-28728 A, DLA MIL- | ||||
| AIA/NAS NASM51838-2011 | PIN, STRAIGHT, STEEL, DRILL ROD Rev 1 [Superseded: DLA MS51838 CANC NOTICE 2, DLA MS51838 VALID NOTICE 1, DLA MS51838] | ||||
| AIA/NAS NAS1924-2010 | CLAMP, HOSE Rev 3 | ||||
| AIA/NAS NA0100-2010 | FASTENER CODE METRIC Rev 1 | ||||
| AIA/NAS NAS1391-1983 | Wire, Electrical, Insulated Copper Solid Conductor Hook-Up and General Purpose (for 105 Degrees C Service) Rev 1 | ||||
| AIA/NAS NASM51029-2011 | SETSCREW, HEXAGON SOCKET, FLAT POINT, CORROSION RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING Rev 2 [Superseded: DLA MS51029 REV B CANC NOTICE 1, DLA MS51029 REV B, DLA MS51029 REV A, DLA MS51029] | ||||
| AIA/NAS NASM1312-28-2012 | FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR Rev 1 [Superseded: NAVY MIL-STD-1312 -28 CANC NOTICE 1, NAVY MIL-STD-1312 -28] | ||||
| AIA/NAS NAS1900-2012 | RIVET, BLIND, GENERAL PURPOSE, BULBED, SELF PLUGGING, MECHANICALLY-LOCKED-SPINDLE Rev 5 | ||||
| AIA/NAS NASM35678-2011 | PIN, GROOVED, HEADLESS, LONGITUDINAL CENTER GROOVE, CORROSION RESISTING STEEL Rev 1 [Superseded: DLA MS35678 REV B CANC NOTICE 3, DLA MS35678 REV B VALID NOTICE 2, DLA MS35678 REV B VALID NOTICE 1, DLA MS35678 REV B, DLA MS35678 REV A, DLA MS35678] | ||||
| AIA/NAS NASM320-2010 | NUT, PLAIN, CASTELLATED, SHEAR Rev 2 [Superseded: DLA AN320 REV 14 CANC NOTICE 1, DLA AN320 REV 14, DLA AN320 REV 13, DLA AN320 REV 12, DLA AN320 REV 11, DLA AN320 REV 10, DLA AN320 REV 9] | ||||
| AIA/NAS NASM51023-2010 | SETSCREW, HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNF-3A, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS51023 REV C CANC NOTICE 1, DLA MS51023 REV C, DLA MS51023 REV B] | ||||
| AIA/NAS NASM35791-2012 | HANDLE, BAIL, CHEST, SURFACE MOUNTING, COUNTERSUNK HOLES Rev 1 [Superseded: DLA MS35791 REV B CANC NOTICE 1, DLA MS35791 REV B, DLA MS35791] | ||||
| AIA/NAS NAS1578-2012 | BOLT, SHEAR, FLAT PAN HEAD, CLOSE TOLERANCE, DOVETAIL SLOT, OFFSET CRUCIFORM, AND OFFSET CRUCIFORM-RIBBED, SELF-LOCKING AND NONLOCKING, 95 KSI Fsu Rev 14 | ||||
| AIA/NAS NASM51861-2011 | SCREW, TAPPING, THREAD FORMING, TYPE AB, PAN HEAD, CROSS-RECESSED Rev 3 [Superseded: DLA MS51861 REV A CANC NOTICE 3, DLA MS51861 REV A VALID NOTICE 2, DLA MS51861 REV A VALID NOTICE 1, DLA MS51861 REV A] | ||||
| AIA/NAS NASM14218-2010 | RIVET, SOLID, 120 DEGREES FLUSH INTERFERENCE SHEAR HEAD Rev 1 [Superseded: DLA MS14218 REV C CANC NOTICE 1, DLA MS14218 REV C, DLA MS14218 REV B, DLA MS14218 REV A, DLA MS14218] | ||||
| AIA/NAS NASM22978-2012 | FASTENER, ROTARY, QUICK-OPERATING, HIGH-STRENGTH Rev 1 [Superseded: DLA MIL-F-22978 A CANC NOTICE 1, DLA MIL-F-22978 A (1), DLA MIL-F-22978 A, DLA MIL-F-22978] | ||||
| AIA/NAS NA0036-2012 | BOLT, CLOSE TOLERANCE, HEXAGON HEAD, ALLOY STEEL, 1100 MPa, METRIC Rev 5 | ||||
| AIA/NAS NASM21383-2011 | KNOB, RADIAL INDICATOR, ILLUMINATED AND NON-ILLUMINATED Rev 1 [Superseded: DLA MS21383 REV F CANC NOTICE 2, DLA MS21383 REV F NOTICE 1, DLA MS21383 REV F, DLA MS21383 REV E, DLA MS21383 REV D, DLA MS21383 REV C, DLA MS21383 REV B, DLA MS21383 REV | ||||
| AIA/NAS NA0137-2010 | KEY, WOODRUFF, ALLOY STEEL, METRIC Rev 1 | ||||
| AIA/NAS NASM21314-2011 | STRAP, RETAINING, TWO HOLE, FOR PIPE, CONDUIT, AND CABLE Rev 2 [Superseded: DLA MS21314 REV B CANC NOTICE 1, DLA MS21314 REV B, DLA MS21314 REV A] | ||||
| AIA/NAS NASM77072-2011 | TERMINAL, LUG, SOLDER TYPE, PHOSPHOR BRONZE STAMPING, LOCKING TYPE, FLAT, ONE HOLE Rev 1 [Superseded: DLA MS77072 CANC NOTICE 2, DLA MS77072 NOTICE 1, DLA MS77072] | ||||
| AIA/NAS NAS1327-2011 | SPACER, THRU-HOLE, SPLINE Rev 1 | ||||
| AIA/NAS NAS301-2011 | WASHER, 2024 ALUMINUM ALLOY, FLAT, OVERSIZE OD Rev 2 | ||||
| AIA/NAS NAS4450-2011 | PIN, CRIMP, PROTRUDING SHEAR HEAD Rev 3 |
若您对上表中数据有任何疑问，请与网站联系。
