（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NAS353-1961 | Specification - Nut - Aircraft Self-Locking for 160,000 to 180,000 psi Tension Bolts Rev 2 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380] | ||||
| AIA/NAS NASM83459-2011 | RIVET, TITANIUM, BIMETAL, 95 KSI Fsu, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-R-83459 A CANC NOTICE 2, DLA MIL-R-83459 A VALID NOTICE 1, DLA MIL-R-83459 A, DLA MIL-R-83459] | ||||
| AIA/NAS NASM5591-2011 | FASTENERS, PANEL, NONSTRUCTURAL Rev 1 [Superseded: DLA MIL-F-5591 C CANC NOTICE 2, DLA MIL-F-5591 C (2), DLA MIL-F-5591 C VALID NOTICE 1, DLA MIL-F-5591 C (1), DLA MIL-F-5591 C, DLA MIL-F-5591 B, DLA MIL-F-5591 A (1), DLA MIL-F-5591 A] | ||||
| AIA/NAS NAS380-2011 | NAS DOCUMENTS, PREPARATION AND MAINTENANCE, IN THE INCH SYSTEM OF UNITS Rev 17 | ||||
| AIA/NAS NAS1211-2011 | FITTING, TIE DOWN STRAP END Rev 3 | ||||
| AIA/NAS NASM20066-2010 | KEY, MACHINE, SQUARE IN CROSS SECTION, BOTH ENDS SQUARE Rev 1 [Superseded: DLA MS20066 REV A CANC NOTICE 2, DLA MS20066 REV A VALID NOTICE 1, DLA MS20066 REV A] | ||||
| AIA/NAS NASM8975/7-2012 | FASTENERS, BLIND, HIGH STRENGTH, TITANIUM/CRES, FLUSH HEAD, TYPE I, CLASS 2 Rev 1 [Superseded: DLA MIL-F-8975/7 CANC NOTICE 1, DLA MIL-F-8975/7] | ||||
| AIA/NAS NAS1038-1987 | Nut Assembly, Self-Locking, Gang Channel - Regular Height, Non-Csk Rev 5 | ||||
| AIA/NAS NASM24667-2011 | SCREW, CAP, SOCKET HEAD, FLAT COUNTERSUNK, 82潞, ALLOY STEEL, UNC-3A Rev 1 [Superseded: DLA MS24667 REV D CANC NOTICE 1, DLA MS24667 REV D, DLA MS24667 REV C, DLA MS24667 REV B, DLA MS24667 REV A, DLA MS24667] | ||||
| AIA/NAS NASM21082-2011 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, NON-METALLIC INSERT, STEEL, 125 KSI Ftu, 250 癋 Rev 1 [Superseded: DLA MS21082 REV F CANC NOTICE 1, DLA MS21082 REV F, DLA MS21082 REV E, DLA MS21082 REV D, DLA MS21082 REV C, DLA MS21082 REV B] | ||||
| AIA/NAS NAM1312-109-2011 | FASTENER TEST METHODS, METRIC METHOD 109 STRESS CORROSION Rev 1 [Superseded: NAVY DOD-STD-1312 -109 CANC NOTICE 1, NAVY DOD-STD-1312 -109] | ||||
| AIA/NAS NASM20065-2010 | KEY, MACHINE, RECTANGULAR IN CROSS SECTION, BOTH ENDS SQUARE Rev 1 [Superseded: DLA MS20065 REV A CANC NOTICE 2, DLA MS20065 REV A VALID NOTICE 1, DLA MS20065 REV A] | ||||
| AIA/NAS NAS1720-2011 | RIVET, BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE Rev 3 | ||||
| AIA/NAS NA0135-2010 | KEY, MACHINE, SQUARE CROSS SECTION, BOTH ENDS SQUARE, ALLOY STEEL, METRIC Rev 1 | ||||
| AIA/NAS NA0040-0041-2011 | NUT, SELF-LOCKING, PLATE, TWO LUG, FIXED, LOW HEIGHT, C'BORED, 1100 MPa, METRIC, 235 癈, 425 癈 Rev 2 | ||||
| AIA/NAS NAS1057-2011 | SPACER, SLEEVE, SCREW AND BOLT, HIGH TEMPERATURE, NON MAGNETIC Rev 9 | ||||
| AIA/NAS NASM24625-2012 | SCREW, TAPPING, THREAD CUTTING, TYPE BF OR BT, PAN HEAD, CROSS-RECESSED, CARBON STEEL Rev 1 [Superseded: DLA MS24625 REV C VALID NOTICE 2, DLA MS24625 REV C VALID NOTICE 1, DLA MS24625 REV C, DLA MS24625 REV B, DLA MS24625 REV A] | ||||
| AIA/NAS NASM35307-2010 | SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A Rev 1 [Superseded: DLA MS35307 REV E CANC NOTICE 1, DLA MS35307 REV E, DLA MS35307 REV D (1), DLA MS35307 REV D VALID NOTICE 1, DLA MS35307 REV D, DLA M | ||||
| AIA/NAS NAS23-1980 | Terminal-Tank Strap, Plain Rev 5 | ||||
| AIA/NAS NASM21063-2011 | NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI Ftu, 250 癋 Rev 1 [Superseded: DLA MS21063 REV H CANC NOTICE 1, DLA MS21063 REV H (3), DLA MS21063 REV H (2), DLA MS21063 REV H (1), DLA MS21063 REV H, DLA MS21063 REV G, DLA MS21 | ||||
| AIA/NAS NASM14155-2011 | WASHER, RECESSED COUNTERSUNK TWO SURFACES, FOR USE WITH WHEEL BOLTS AND NUTS UP TO AND INCLUDING 180 KSI Ftu Rev 1 [Superseded: DLA MS14155 CANC NOTICE 2, DLA MS14155 VALID NOTICE 1, DLA MS14155] | ||||
| AIA/NAS NASM35674-2012 | PIN, GROOVED, HEADLESS, LONGITUDINAL STRAIGHT GROOVE, CARBON STEEL Rev 1 [Superseded: DLA MS35674 REV A CANC NOTICE 2, DLA MS35674 REV A VALID NOTICE 1, DLA MS35674 REV A, DLA MS35674] | ||||
| AIA/NAS NASM22529/2-2011 | GROMMET, CUSHION COMPOSITE, EDGING Rev 1 [Superseded: DLA MIL-DTL-22529/2 B CANC NOTICE 1, DLA MIL-DTL-22529/2 B, DLA MIL-DTL-22529/2 A, DLA MIL-DTL-22529/2] | ||||
| AIA/NAS NASM5674-2011 | RIVETS, STRUCTURAL, ALUMINUM ALLOY, TITANIUM COLUMBIUM ALLOY, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-R-5674 F CANC NOTICE 3, DLA MIL-R-5674 F (2), DLA MIL-R-5674 F REINST NOTICE 2, DLA MIL-R-5674 F CANC NOTICE 1, DLA MIL-R-5674 F (1), | ||||
| AIA/NAS NASM35751-2011 | BOLT, SQUARE NECK, ROUND HEAD (CARRIAGE), STEEL, CADMIUM OR ZINC PLATED, UNC-2A Rev 1 [Superseded: DLA MS35751 REV E CANC NOTICE 1, DLA MS35751 REV E, DLA MS35751 REV D, DLA MS35751 REV C, DLA MS35751 REV B] | ||||
| AIA/NAS NAS287-2010 | TERMINAL ?CHAIN TO CABLE (FOR SWAGING) Rev 4 | ||||
| AIA/NAS NASM21054-2012 | NUT, SELF-LOCKING, PLATE, ONE LUG, 100?CSK, LOW HEIGHT, CRES, 125 KSI Ftu, 450 癋& 800 癋 Rev 1 [Superseded: DLA MS21054 REV E CANC NOTICE 2, DLA MS21054 REV E VALID NOTICE 1, DLA MS21054 REV E, DLA MS21054 REV D, DLA MS21054 REV C] | ||||
| AIA/NAS NAS1761-2012 | ELBOW, REDUCER, 45? FLARELESS TUBE TO SWIVEL Rev 3 | ||||
| AIA/NAS NAS1047-2011 | TURNBUCKLE ASSEMBLY, FORGED CARBON STEEL, JAW AND JAW, FOR GROUND SUPPORT EQPT Rev 5 | ||||
| AIA/NAS NASM22529-2011 | GROMMET, EDGING Rev 1 [Superseded: DLA MIL-DTL-22529 D CANC NOTICE 2, DLA MIL-DTL-22529 D CANC NOTICE 1, DLA MIL-DTL-22529 D (2), DLA MIL-DTL-22529 D (1), DLA MIL-DTL-22529 D, DLA MIL-DTL-22529 C (1), DLA MIL-DTL-22529 C, DLA MIL-G-22529 B VALID | ||||
| AIA/NAS NASM28728/7-2010 | DIAL, CONTROL, MULTITURN COUNTERS, 100 - TURN COUNTERS, 4 - DIGIT Rev 1 [Superseded: DLA MIL-D-28728/7 CANC NOTICE 3, DLA MIL-D-28728/7 NOTICE 2, DLA MIL-D-28728/7] | ||||
| AIA/NAS NASM124691-124730-2010 | INSERT, CRES, HELICAL COIL, FINE THREAD 1-1/2 DIA NOMINAL LENGTH Rev 1 [Superseded: DLA MS124691 THRU MS124730 REV E CANC NOTICE 2, DLA MS124691 THRU MS124730 REV E VALID NOTICE 1, DLA MS124691 THRU MS124730 REV E] | ||||
| AIA/NAS NAS1321-2011 | RIVET, SLUG, SLEEVELESS Rev 3 | ||||
| AIA/NAS NASM21081-2011 | NUT, SELF-LOCKING, PLATE, CORNER, NON-METALLIC INSERT, STEEL, 125 KSI Ftu, 250 掳F Rev 1 [Superseded: DLA MS21081 REV D CANC NOTICE 1, DLA MS21081 REV D, DLA MS21081 REV C, DLA MS21081 REV B] | ||||
| AIA/NAS NASM21207-2012 | SCREW, TAPPING, 100?FLAT HEAD, SPACED THREAD Rev 2 [Superseded: DLA MS21207 REV A CANC NOTICE 2, DLA MS21207 REV A VALID NOTICE 1, DLA MS21207 REV A, DLA MS21207] | ||||
| AIA/NAS NA0035-2011 | SCREW, CLOSE TOLERANCE, PAN HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 1100 MPa, METRIC Rev 3 | ||||
| AIA/NAS NASM51959-2010 | SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82? CRUCIFORM RECESS, CORROSION-RESISTANT STEEL, UNC-2A Rev 1 [Superseded: DLA MS51959 REV D CANC NOTICE 1, DLA MS51959 REV D, DLA MS51959 REV C, DLA MS51959 REV B, DLA MS51959 REV A] | ||||
| AIA/NAS NAS68-1947 | Guide - Fastener, Cowl Dzus Type Rev 1 | ||||
| AIA/NAS NAS1212-2011 | STRAP ASSEMBLY, TIE DOWN Rev 3 | ||||
| AIA/NAS NASM24066/4-2011 | CLIP, DOUBLE SLOT, SPRING TENSION Rev 1 [Superseded: DLA MIL-C-24066/4 D CANC NOTICE 1, DLA MIL-C-24066/4 D, DLA MIL-C-24066/4 C, DLA MIL-C-24066/4 B, DLA MIL-C-24066/4 A, DLA MIL-C-24066/4] | ||||
| AIA/NAS NAS1676-2011 | WASHER, LOCK, SPRING, HELICAL, HI-COLLAR Rev 2 | ||||
| AIA/NAS NASM3213-2011 | SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS3213 REV A CANC NOTICE 2, DLA MS3213 REV A VALID NOTICE 1, DLA MS3213 REV A, DLA MS3213] | ||||
| AIA/NAS NASM45595/7-2011 | WASHER, CONCAVE, STEEL, ALLOY Rev 1 [Superseded: DLA MIL-W-45595/7 CANC NOTICE 1, DLA MIL-W-45595/7] | ||||
| AIA/NAS NAS5321-2011 | BOLT, SHEAR, 100 DEGREE FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 108 KSI Fsu Rev 1 | ||||
| AIA/NAS NAS897-2012 | REAMERS, CHUCKING, RIGHT-HAND CUT, 0.0938 THROUGH 1.5000 INCH Rev 2 | ||||
| AIA/NAS NASM91522-2012 | KNOB, CONTROL, CRANK, METAL Rev 2 [Superseded: DLA MS91522 REV A CANC NOTICE 2, DLA MS91522 REV A NOTICE 1, DLA MS91522 REV A, DLA MS91522] | ||||
| AIA/NAS NAS1724-2012 | FASTENER, SHEAR, 100?STANDARD FLUSH HEAD, TAPERED SHANK (TS), 95 KSI Fsu, 108 KSI Fsu, 110 KSI Fsu, 125 KSI Fsu, 132 KSI Fsu, 156 KSI Fsu Rev 3 | ||||
| AIA/NAS NAS1940-2011 | GROMMET, NONMETALLIC Rev 1 | ||||
| AIA/NAS NASM3926/3-2012 | KNOB, CONTROL, TAPERED Rev 1 [Superseded: DLA MIL-K-3926/3 A CANC NOTICE 2, DLA MIL-K-3926/3 A NOTICE 1, DLA MIL-K-3926/3 A, DLA MIL-K-3926/3] | ||||
| AIA/NAS NASM51862-2011 | SCREW, TAPPING, THREAD FORMING, TYPE AB, FLAT 82?COUNTERSUNK HEAD, CROSS-RECESSED Rev 1 [Superseded: DLA MS51862 REV A CANC NOTICE 3, DLA MS51862 REV A VALID NOTICE 2, DLA MS51862 REV A VALID NOTICE 1, DLA MS51862 REV A] |
若您对上表中数据有任何疑问，请与网站联系。
