检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NA0049-2012 NUT, SELF-LOCKING, CASTELLATED, REDUCED HEXAGON, 600 MPa, METRIC, 235 癈 Rev 2
AIA/NAS NASM21098-2010 BOLT, SELF-LOCKING, STEEL, 160 KSI Ftu, 250 DEGREES F, 12 POINT, EXTERNAL WRENCHING (EXTERNALLY WRENCHING CAP SCREWS) Rev 1 [Superseded: DLA MS21098 CANC NOTICE 1, DLA MS21098 (1), DLA MS21098]
AIA/NAS NAS1381-1991 Stud, Welding, Externally Threaded Rev 6
AIA/NAS NAS1554-2011 GROMMET, PTFE, SPLIT Rev 4
AIA/NAS NASM24629-2011 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G, OR T, PAN HEAD, CRUCIFORM RECESSED, CARBON STEEL, CADMIUM PLATED Rev 1 [Superseded: DLA MS24629 REV C CANC NOTICE 3, DLA MS24629 REV C VALID NOTICE 2, DLA MS24629 REV C VALID NOTICE 1, DLA MS24629 REV C,
AIA/NAS NAS1076-1978 Lubricant, High Gear Loading, All Weather Rev 2
AIA/NAS NAS1635-2010 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, FULL THREAD, NON-LOCKING AND SELF-LOCKING Rev 3
AIA/NAS NASM45938/6-2011 NUT, SELF-LOCKING, CLINCH, (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 450 癋 OR 800 癋) Rev 1 [Superseded: DLA MIL-N-45938/6 C CANC NOTICE 1, DLA MIL-N-45938/6 C, DLA MIL-N-45938/6 B, DLA MIL-N-45938/6 A, DLA MIL-N-45938/6]
AIA/NAS NASM21244-2010 NUT, CASTELLATED, HEXAGON, COUNTERBORED ASSEMBLED WASHER, 450 癋, FOR SELF-RETAINING BOLTS Rev 1 [Superseded: DLA MS21244 REV B CANC NOTICE 1, DLA MS21244 REV B (1), DLA MS21244 REV B, DLA MS21244 REV A]
AIA/NAS NASM24677-2010 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED, ALLOY STEEL (UNC-3A) Rev 1 [Superseded: DLA MS24677 REV D CANC NOTICE 1, DLA MS24677 REV D (1), DLA MS24677 REV D, DLA MS24677 REV C, DLA MS24677 REV B, DLA MS24677 REV A, DLA MS24677]
AIA/NAS NAS1103-1120-2010 BOLT, SHEAR, HEXAGON HEAD MODIFIED, 95 KSI Fsu, SHORT THREAD Rev 11 [Replaced By: AIA/NAS NAS6203-6220, AIA/NAS NAS6203-6220, AIA/NAS NAS6203-6220, AIA/NAS NAS6203-6220, AIA/NAS NAS6203-6220, AIA/NAS NAS6203-6220, AIA/NAS NAS6203-6220]
AIA/NAS NAS128-2012 FILLER, KNOB LEVER SLOT Rev 3
AIA/NAS NAM1312-113-2012 FASTENER TEST METHODS, METRIC METHOD 113 DOUBLE SHEAR TEST Rev 1 [Superseded: NAVY DOD-STD-1312 -113 CANC NOTICE 1, NAVY DOD-STD-1312 -113]
AIA/NAS NASM51038-2010 SETSCREW, HEXAGON SOCKET, CONE POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A& UNF-3A, PLAIN AND SELF-LOCKING Rev 1 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380] [Superseded: DLA MS51038 REV B CANC NOTICE 1, DLA MS5103
AIA/NAS NASM501-2011 SCREW, MACHINE, FILLISTER HEAD, FINE THREAD [Superseded: DLA AN501 REV 6 CANC NOTICE 1, DLA AN501 REV 6 REINST]
AIA/NAS NASM18067-2012 Setscrew, Hexagon Socket, Cone Point, 250 Degrees F, Self Locking, Element, Alloy Steel, Cadmium Plated Rev 1 [Superseded: DLA MS18067 REV A CANC NOTICE 2, DLA MS18067 REV A VALID NOTICE 1, DLA MS18067 REV A]
AIA/NAS NASM525-2010 SCREW, WASHER HEAD Rev 2 [Superseded: DLA AN525 REV 2 CANC NOTICE 1, DLA AN525 REV 2 (1), DLA AN525 REV 2, DLA AN525 REV 1]
AIA/NAS NASM1312-4-2011 FASTENER TEST METHODS METHOD 4 LAP JOINT SHEAR Rev 1 [Superseded: NAVY MIL-STD-1312 -4 CANC NOTICE 1, NAVY MIL-STD-1312 -4]
AIA/NAS NASM122076-122115-2010 INSERT, CRES HELICAL COIL, COARSE THREAD, 1 DIA NOMINAL LENGTH REV 1 [Superseded: DLA MS122076 THRU MS122115 REV D CANC NOTICE 1, DLA MS122076 THRU MS122115 REV D, DLA MS122076 THRU MS122115 REV C, DLA MS122076 THRU MS122115 REV B, DLA MS122076 THRU
AIA/NAS NAS9307-2011 RIVET, BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED, STYLE A, CLASS 1, CODE M Rev 4
AIA/NAS NASM315-2011 NUT, PLAIN, HEXAGON, AIRFRAME Rev 2 [Superseded: DLA AN315 REV 10 CANC NOTICE 2, DLA AN315 REV 10 CANC NOTICE 1, DLA AN315 REV 10, DLA AN315 REV 9]
AIA/NAS NASM20068-2010 KEY, MACHINE, SQUARE IN CROSS SECTION, BOTH ENDS ROUND Rev 1 [Superseded: DLA MS20068 REV A CANC NOTICE 2, DLA MS20068 REV A VALID NOTICE 1, DLA MS20068 REV A]
AIA/NAS NASM21050-2010 Nut, Self-Locking, Plate, Two Lug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F Rev. 1 [Superseded: DLA MS21050 REV D CANC NOTICE 1, DLA MS21050 REV D, DLA MS21050 REV C]
AIA/NAS NASM21322-2010 CLAMP, LOOP, ALUMINUM, PLAIN AND CUSHIONED Rev 1 [Superseded: DLA MS21322 REV D CANC NOTICE 1, DLA MS21322 REV D]
AIA/NAS NA0029-0030-2012 NUT, SELF-LOCKING, SPLINE DRIVE, 1250 MPa, 235 癈, 425 癈, METRIC Rev 3
AIA/NAS NAS1762-2012 ELBOW REDUCER, 90? FLARELESS TUBE TO SWIVEL Rev 3
AIA/NAS NA0163-2011 BOLT, BLIND, DESIGN ELEMENTS, METRIC Rev 1
AIA/NAS NAS1747-2012 SPLICE, CONDUCTOR AND SHIELD TERMINATION, SOLDER STYLE, HEAT SHRINKABLE, INSULATED, SPECIFICATION FOR Rev 5
AIA/NAS NAS3353-2011 FIXTURE, BEARING SURFACE SQUARENESS TEST, SELF-LOCKING NUTS Rev 1
AIA/NAS NA0242-2011 INSERT, SANDWICH PANEL, MOLDED IN, THRU THREADED, SELF-LOCKING, CRES, METRIC Rev 1
AIA/NAS NASM20601-2011 RIVET, BLIND, STRUCTURAL, PULL STEM, SELF-PLUGGING, 100?FLUSH HEAD, TYPE II Rev 1 [Superseded: DLA MS20601 REV J CANC NOTICE 1, DLA MS20601 REV J (1), DLA MS20601 REV J, DLA MS20601 REV H, DLA MS20601 REV G, DLA MS20601 REV F, DLA MS20601 REV E, D
AIA/NAS NA0147-2011 INSERT, SCREW THREAD, KEY LOCKED, A286 CRES, MINIATURE, METRIC Rev 2
AIA/NAS NASM35756-2011 KEY, WOODRUFF, STEEL, ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS Rev 1 [Superseded: DLA MS35756 REV E CANC NOTICE 1, DLA MS35756 REV E VALID NOTICE 1, DLA MS35756 REV E, DLA MS35756 REV D VALID NOTICE 1, DLA MS35756 REV D, DLA MS35756 REV C, DLA MS
AIA/NAS NASM91524-2012 KNOB, CONTROL, SHORT BAR, METAL AND PLASTIC Rev 1 [Superseded: DLA MS91524 REV E CANC NOTICE 2, DLA MS91524 REV E NOTICE 1, DLA MS91524 REV E, DLA MS91524 REV D, DLA MS91524 REV C, DLA MS91524 REV B, DLA MS91524 REV A, DLA MS91524]
AIA/NAS NAS980-1975 Printed Circuit Board Soldering Machine Automatically Controlled Rev 1
AIA/NAS NASM85643/4-2012 BIT, SCREWDRIVER, RIBBED, OFFSET CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK Rev 1 [Superseded: NAVY MIL-B-85643/4 CANC NOTICE 1, NAVY MIL-B-85643/4]
AIA/NAS NAS1237-1969 Elbow - Universal 90 Degree - Flareless Rev 1
AIA/NAS NA0235-0236-2012 INSERT, SANDWICH PANEL, MOLDED IN, CSK, THRU CLEARANCE, AL ALLOY/CRES, METRIC Rev 2
AIA/NAS NAS1446-1452-2011 PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, PROTRUDING HEAD, SHEAR, PULL-TYPE Rev 3
AIA/NAS NAS12-1947 Screws - Non-Losable, Alum. Alloy,
AIA/NAS NAS370-373-1991 Control Rod and Tube Assembly .3125-24UNF-3A Thread Rev 3 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM7839-2011 SCREWS, STRUCTURAL, AIRCRAFT Rev 1 [Superseded: DLA MIL-S-7839 B CANC NOTICE 3, DLA MIL-S-7839 B NOTICE 2, DLA MIL-S-7839 B VALID NOTICE 1, DLA MIL-S-7839 B (3), DLA MIL-S-7839 B (2), DLA MIL-S-7839 B (1), DLA MIL-S-7839 B, DLA MIL-S-7839 A (1),
AIA/NAS NASM27120-2011 CLEVIS, ROD END, TURNBUCKLE (GENERAL PURPOSE) Rev 1 [Superseded: DLA MS27120 REV A CANC NOTICE 1, DLA MS27120 REV A]
AIA/NAS NASM33750-2011 RECESS, DOVETAIL SLOT AND CONICAL DOVETAIL SLOT, DIMENSIONS OF RECESS, GAGE AND DRIVER FOR Rev 1 [Superseded: NAVY MS33750 REV J CANC NOTICE 1, NAVY MS33750 REV J, NAVY MS33750 REV H, NAVY MS33750 REV G, NAVY MS33750 REV F, NAVY MS33750 REV E, NAVY
AIA/NAS NAS172-2002 Bolt-Internal Wrenching-Steel 1.2500-12 Rev 9
AIA/NAS NAS1675-2011 FASTENER, BLIND, INTERNALLY THREADED, EXTERNAL SLEEVE SELF-LOCKING Rev 5
AIA/NAS NAS3610-1990 Cargo Unit Load Devices - Specification for Rev. 10
AIA/NAS NASM21140-2010 FASTENERS, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 DEGREES FLUSH HEAD, CORROSION RESISTING STEEL, 95 KSI Fsu Rev 1 [Superseded: DLA MS21140 REV J CANC NOTICE 1, DLA MS21140 REV J, DLA MS21140 REV H, DLA MS21140 REV G, DLA MS211
AIA/NAS NASM35333-2010 WASHER, LOCK, FLAT, INTERNAL TOOTH Rev 2 [Superseded: DLA MS35333 REV K CANC NOTICE 4, DLA MS35333 REV K NOTICE 3, DLA MS35333 REV K (1), DLA MS35333 REV K REINST NOTICE 2, DLA MS35333 REV K CANC NOTICE 1, DLA MS35333 REV K, DLA MS35333 REV J, DLA
AIA/NAS NAS67-2011 GUIDE, FASTENER, LOW FORM, COWL, DZUS TYPE Rev 5
776140 条记录 10961/15523 页 第一页 <上一页  10957   10958   10959   10960  10961  10962   10963   10964   10965  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。