检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NASM51863-2011 SCREW, TAPPING, HIGH PERFORMANCE, THREAD ROLLING, TYPES SF, SW AND TT, PAN HEAD, CROSS-RECESSED Rev 1 [Superseded: DLA MS51863 CANC NOTICE 2, DLA MS51863 VALID NOTICE 1, DLA MS51863]
AIA/NAS NAS516-2011 FITTING, LUBRICATION, .1250 INCH DRIVE, FLUSH TYPE Rev 10
AIA/NAS NASM51021-2010 SETSCREW, HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS51021 REV C CANC NOTICE 1, DLA MS51021 REV C, DLA MS51021 REV B, DLA MS51021]
AIA/NAS NAS2605-2612-2011 BOLT, LOCK, SHEAR, PROTRUDING HEAD, STUMP-TYPE, TITANIUM ALLOY Rev 8
AIA/NAS NASM20652/1-2012 EYELETS, METALLIC, ROLLED FLANGE TYPE, AND EYELET WASHER Rev 1 [Superseded: DLA MIL-E-20652/1 B CANC NOTICE 1, DLA MIL-E-20652/1 B, DLA MIL-E-20652/1 A, DLA MIL-E-20652/1]
AIA/NAS NASM51095-2011 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNC-2A, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS51095 REV F CANC NOTICE 2, DLA MS51095 REV F VALID NOTICE 1, DLA MS51095 REV F, DL
AIA/NAS NASM1312-24-2012 FASTENER TEST METHODS METHOD 24 RECEPTACLE TORQUE-OUT, PANEL FASTENERS Rev 1 [Superseded: NAVY MIL-STD-1312 -24 CANC NOTICE 1, NAVY MIL-STD-1312 -24]
AIA/NAS NAS1388-2011 SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, PRE-INSULATED, (CLASS 2) WIRE SIZES 10 TO 26 Rev 10
AIA/NAS NA0073-0074-2011 NUT, SELF-LOCKING, PLATE, ONE LUG, METRIC, FLOATING, LOW HEIGHT, CBORED, 1100 MPa, 235 掳C, 425 掳C Rev 2
AIA/NAS NASM17989-2011 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, 揕?HANDLE Rev 1 [Superseded: DLA MS17989 REV E CANC NOTICE 1, DLA MS17989 REV E, DLA MS17989 REV D, DLA MS17989 REV C]
AIA/NAS NAS932-2012 DRILLS -THREADED HEXAGONAL SHANK SIZES
AIA/NAS NAS1834-2010 INSERT, MOLDED IN, CSK AND THRU CLEARANCE HOLE, SANDWICH PANEL Rev 6
AIA/NAS NASM83459/1-2012 RIVET, TITANIUM, BIMETAL, 95 KSI Fsu, PROTRUDING HEAD, TYPE I Rev 1 [Superseded: DLA MIL-R-83459/1 B CANC NOTICE 1, DLA MIL-R-83459/1 B, DLA MIL-R-83459/1 A, DLA MIL-R-83459/1]
AIA/NAS NASM24374-2012 CASTERS, RIGID AND SWIVEL, PRECISION SPRING MOUNTED Rev 1 [Superseded: DLA MS24374 REV B CANC NOTICE 1, DLA MS24374 REV B, DLA MS24374]
AIA/NAS NASM85449/1-2011 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHIONED, NBR RUBBER, 321 CRES, 275 癋, FUEL RESISTANT, GENERAL PURPOSE Rev 1 [Superseded: NAVY MIL-C-85449/1 B CANC NOTICE 1, NAVY MIL-C-85449/1 B, NAVY MIL-C-85449/1 A, NAVY MIL-C-85449/1]
AIA/NAS NASM45909-2011 STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-S-45909 C CANC NOTICE 1, DLA MIL-S-45909 C SUPP 1, DLA MIL-S-45909 C, DLA MIL-S-45909 B SUPP 1, DLA MIL-S-45909 B, DLA MIL-S-45909 A (1), DLA MIL-S-45909
AIA/NAS NAS11-1957 Valve Assembly - Flapper Rev 3
AIA/NAS NAS1300-2011 THUMBSCREW Rev 2
AIA/NAS NASM24674-2010 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED, CORROSION-RESISTING STEEL (UNC-3A) Rev 1 [Superseded: DLA MS24674 REV D CANC NOTICE 1, DLA MS24674 REV D (1), DLA MS24674 REV D, DLA MS24674 REV C, DLA MS24674 REV B, DLA MS24674 REV A, DLA MS24674]
AIA/NAS NASM20033-20046-2010 BOLT, TENSION, HEXAGON HEAD, MACHINE, A286 CRES, 1200 DEGREES F, 140 KSI Ftu Rev 2 [Superseded: DLA MS20033 THRU MS20046 REV C CANC NOTICE 1, DLA MS20033 THRU MS20046 REV C, DLA MS20033 THRU MS20046 REV B, DLA MS20033 THRU MS20046 REV A, DLA MS20033
AIA/NAS NAS3601-1994 Recommended Standard Data Format of Transport Airplane Characteristics for Airport Planning Rev 6
AIA/NAS NA0026-2011 PROCUREMENT SPECIFICATION, METRIC FASTENERS, A-286 CRES EXTERNALLY THREADED, 1100 MPa TENSILE, 660 MPa SHEAR Rev 3
AIA/NAS NASM35202-2011 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82掳, CROSS-RECESSED, ALUMINUM ALLOY, ANODIC COATED, UNC-2A Rev 1 [Superseded: DLA MS35202 REV C CANC NOTICE 3, DLA MS35202 REV C VALID NOTICE 2, DLA MS35202 REV C VALID NOTICE 1, DLA MS35202 REV C, DLA MS35202
AIA/NAS NAS73-2011 BUSHING, CLAMP-UP, STEEL, CADMIUM PLATED Rev 9
AIA/NAS NASM1312-23-2012 FASTENER TEST METHODS METHOD 23 TENSILE STRENGTH OF PANEL FASTENERS Rev 1 [Superseded: NAVY MIL-STD-1312 -23 CANC NOTICE 1, NAVY MIL-STD-1312 -23]
AIA/NAS NAS357-2012 TUBE, CONTROL, ALUMINUM ALLOY Rev 5
AIA/NAS NA0166-0167-1991 Insert, Molded-in, CSK Clearance Hole, Sandwich Panel, Al Alloy and CRES, Metric Rev 1 [Refer To: AIA/NAS NA0235-0236]
AIA/NAS NA0271-2011 PROCUREMENT SPECIFICATION, METRIC FASTENERS, CRES 300 SERIES, EXTERNALLY THREADED, MJ THREAD, 500 MPa Ftu and 700 MPa Ftu Rev 1
AIA/NAS NASM25440-2012 WASHERS, FOR USE WITH AIRCRAFT ALUMINUM TERMINALS Rev 1 [Superseded: DLA MS25440 REV C CANC NOTICE 2, DLA MS25440 REV C VALID NOTICE 1, DLA MS25440 REV C, DLA MS25440 REV B, DLA MS25440 REV A]
AIA/NAS NA0087-0088-2012 NUT, SELF-LOCKING, PLATE, FLOATING, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, CBORED, 900 MPa, METRIC, 235 癈, 425 癈 Rev 4
AIA/NAS NAS1055-2011 RIVET, 100?FLUSH CLOSE TOLERANCE HEAD Rev 5
AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1
AIA/NAS NAS172-1980 Bolt - Internal Wrenching, Steel, 1.2500-12 Rev 8
AIA/NAS NASM20067-2010 KEY, MACHINE, SQUARE IN CROSS SECTION, ONE END SQUARE, OTHER END ROUND Rev 1 [Superseded: DLA MS20067 REV A CANC NOTICE 2, DLA MS20067 REV A VALID NOTICE 1, DLA MS20067 REV A]
AIA/NAS NAS9300-110-2012 LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA PART 110: LONG TERM ARCHIVING AND RETRIEVAL OF CAD MECHANICAL 3D EXPLICIT GEOMETRY INFORMATION
AIA/NAS NASM20613-2012 RIVET, SOLID, UNIVERSAL HEAD, STEEL, CARBON AND STEEL, CORROSION-RESISTANT Rev 3 [Superseded: DLA MS20613 REV F CANC NOTICE 1, DLA MS20613 REV F, DLA MS20613 REV E, DLA MS20613 REV D, DLA MS20613 REV C, DLA MS20613 REV B, DLA MS20613 REV A, DLA MS
AIA/NAS NAS1351-2009 SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRF-3A Rev 10
AIA/NAS NASM17731-2012 FASTENER, ROTARY, QUICK-OPERATING, FLUSH HEAD, FLOATING TYPE, 2,210 LBF MIN TENSILE STRENGTH Rev 1 [Superseded: DLA MS17731 REV C CANC NOTICE 2, DLA MS17731 REV C VALID NOTICE 1, DLA MS17731 REV C]
AIA/NAS NASM28728/4-2011 Dial, Control, Multiturn Counters, Vernier, 1.16 Diameter Rev 1 [Superseded: DLA MIL-D-28728/4 B CANC NOTICE 2, DLA MIL-D-28728/4 B NOTICE 1, DLA MIL-D-28728/4 B, DLA MIL-D-28728/4 (1), DLA MIL-D-28728/4]
AIA/NAS NAS1742-2001 Screw, Self-Locking - Pan Head, Full Thread, Patch Type Rev 3
AIA/NAS NAS1331-1983 Cart, Utility Equipment Rev 3
AIA/NAS NASM35675-2011 PIN, GROOVED, HEADLESS, LONGITUDINAL STRAIGHT GROOVE, CORROSION-RESISTING STEEL Rev 1 [Superseded: DLA MS35675 REV B CANC NOTICE 2, DLA MS35675 REV B VALID NOTICE 1, DLA MS35675 REV B, DLA MS35675 REV A, DLA MS35675]
AIA/NAS NAS1394-2011 INSERT朤HREADED METAL, LIGHTWEIGHT, SELF朙OCKING, AND NON SELF朙OCKING Rev 7
AIA/NAS NAS2105-2112-2012 BOLT, LOCK, TENSION, 100?HEAD (NASM24694), PULL-TYPE, TITANIUM ALLOY Rev 5
AIA/NAS NAS877-2012 ANGULAR TARGETS, SOLID, OPTICAL TOOLING 2-1/4 AND 1-1/2 OUTSIDE DIAMETERS Rev 1
AIA/NAS NAS463-2009 NUT SPACER, PLATE, PLAIN Rev 9
AIA/NAS NAS115-1946 Tube - Control, 3/8 O.D. and 1/2 O.D., Alum. Alloy Rev 1 [Refer To: AIA/NAS NAS357]
AIA/NAS NAS1436-1442-2011 PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, 100?SHEAR HEAD, PULL-TYPE Rev 3
AIA/NAS NAS1941-2011 RUBBER, SYNTHETIC, CABLE GROMMET MATERIAL Rev 1
AIA/NAS NAS1775-2011 NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, C'BORED, REDUCED RIVET SPACING, 160 KSI, 450 癋, 800 癋 Rev 2
776140 条记录 10963/15523 页 第一页 <上一页  10959   10960   10961   10962  10963  10964   10965   10966   10967  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。