检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NASM21078-2012 NUT, SELF-LOCKING, PLATE, TWO LUG, NON-METALLIC INSERT, STEEL, 125 KSI Ftu, 250 癋 Rev 1 [Superseded: DLA MS21078 REV G CANC NOTICE 1, DLA MS21078 REV G (2), DLA MS21078 REV G (1), DLA MS21078 REV G, DLA MS21078 REV F, DLA MS21078 REV E, DLA MS2107
AIA/NAS NASM1312-22-2012 FASTENER TEST METHODS METHOD 22 RECEPTACLE PUSH-OUT, PANEL FASTENERS Rev 1 [Superseded: NAVY MIL-STD-1312 -22 CANC NOTICE 1, NAVY MIL-STD-1312 -22]
AIA/NAS NASM21060-2010 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI Ftu, 450 Degrees F& 800 Degrees F Rev 1 [Superseded: DLA MS21060 REV F CANC NOTICE 1, DLA MS21060 REV F, DLA MS21060 REV E, DLA MS21060 REV D, DLA MS21060 REV C]
AIA/NAS NASM21262-2011 SCREWS, SELF LOCKING, 250 掳F, CYLINDRICAL HEAD, HEXAGONAL WRENCHING SOCKET, ALLOY STEEL, 160 KSI Ftu, (SOCKET HEAD CAP SCREWS) Rev 1 [Superseded: DLA MS21262 REV D CANC NOTICE 2, DLA MS21262 REV D VALID NOTICE 1, DLA MS21262 REV D, DLA MS21262 REV B
AIA/NAS NASM51851-2011 SCREW, TAPPING, THREAD CUTTING, TYPE D, HEXAGON HEAD, SLOTTED Rev 1 [Superseded: DLA MS51851 CANC NOTICE 3, DLA MS51851 VALID NOTICE 2, DLA MS51851 VALID NOTICE 1, DLA MS51851]
AIA/NAS NAS1779-2011 NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CBORED, FLOATING, REDUCED RIVET SPACING, 160 KSI, 450 癋, 800 癋 Rev 2
AIA/NAS NAS702-1981 Wire, Electrical, Insulated, Copper Hook- up and General Purpose (for 105 Degrees C Service) Rev 3
AIA/NAS NAS384-2012 SCREW, 100?OVAL RECESSED HEAD, SHEET METAL Rev 2
AIA/NAS NASM35276-2011 SCREW, MACHINE, DRILLED, FILLISTER HEAD, SLOTTED, CORROSION RESISTING STEEL, PASSIVATED, UNF-2A Rev 1 [Superseded: DLA MS35276 REV C CANC NOTICE 2, DLA MS35276 REV C (1), DLA MS35276 REV C VALID NOTICE 1, DLA MS35276 REV C, DLA MS35276 REV B, DLA MS
AIA/NAS NAS5318-2011 BOLT, SHEAR, FLAT PAN HEAD, CLOSE TOLERANCE, LONG THREAD, NON-LOCKING AND SELF-LOCKING, NAS1800 SIX LOBE RECESS, 95 KSI FSU Rev 1
AIA/NAS NAS1582-2001 Bolt, 100 Degree Flush Tension Head Full Thread Rev 5 [Refer To: AIA/NAS NAS1219, AIA/NAS NAS1219, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM21025-2012 NUT, CASTELLATED, HEXAGON Rev 1 [Superseded: DLA MS21025 REV F CANC NOTICE 1, DLA MS21025 REV F, DLA MS21025 REV E VALID NOTICE 1, DLA MS21025 REV E, DLA MS21025 REV D, DLA MS21025 REV C]
AIA/NAS NASM1312-16-2011 FASTENER TEST METHODS METHOD 16 CLAMPING FORCE FOR INSTALLATION, FORMED FASTENERS Rev 1 [Superseded: NAVY MIL-STD-1312 -16 A CANC NOTICE 1, NAVY MIL-STD-1312 -16 A, NAVY MIL-STD-1312 -16]
AIA/NAS NA0096-2012 NUT, SELF-LOCKING, PLATE, CORNER, CRES, LOW HEIGHT, CBORE, 900 MPa, METRIC, 235 癈 AND 425 癈 Rev 3
AIA/NAS NASM21472-2011 SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-S-21472 C CANC NOTICE 1, DLA MIL-S-21472 C, DLA MIL-S-21472 B, DLA MIL-S-21472 A]
AIA/NAS NASM16218-2011 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, COPPER-SILICON ALLOY, UNC-2A, NONMAGNETIC Rev 1 [Superseded: DLA MS16218 REV B CANC NOTICE 2, DLA MS16218 REV B VALID NOTICE 1, DLA MS16218 REV B]
AIA/NAS NAS1350-1978 Equipment Identification Nameplate& Marking Rev 1
AIA/NAS NAS9300-115-2012 LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA PART 115: EXPLICIT CAD ASSEMBLY STRUCTURE
AIA/NAS NASM21-37-2011 BOLT, CLEVIS Rev 1 [Superseded: DLA AN21 THRU AN37 REV 11 CANC NOTICE 1, DLA AN21 THRU AN37 REV 11, DLA AN21 THRU AN37 REV 10, DLA AN21 THRU AN37 REV 9, DLA AN21 THRU AN37 REV 8, DLA AN21 THRU AN37 REV 7, DLA AN21 THRU AN36 REV 6]
AIA/NAS NAS572-1990 Bolt-Full Threaded, 160 ksi Steel, Drilled Head Rev 5
AIA/NAS NASM35650-2012 NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B Rev 1 [Superseded: DLA MS35650 REV G CANC NOTICE 2, DLA MS35650 REV G (1), DLA MS35650 REV G NOTICE 1, DLA MS35650 REV G, DLA MS35650 REV F, DLA MS35650 REV E, DLA MS35650 REV D, DLA MS35650 REV C, DLA M
AIA/NAS NASM14201-2011 NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A.R.E.), 450 篎, STEEL, 125 KSI Ftu, REPLACEABLE NUT ELEMENT, 1/64 OVERSIZE REPAIR Rev 2 [Superseded: DLA MS14201 REV A CANC NOTICE 1, DLA MS14201 REV A, DLA MS14201]
AIA/NAS NASM51870-2011 SCREW, TAPPING, HIGH PERFORMANCE, THREAD ROLLING, TYPES SF, SW AND TT, FLAT COUNTERSUNK HEAD, CROSS RECESSED Rev 2 [Superseded: DLA MS51870 CANC NOTICE 2, DLA MS51870 VALID NOTICE 1, DLA MS51870]
AIA/NAS NASM21068-2012 NUT, SELF-LOCKING, GANG CHANNEL, 100?CSK, FLOATING, LOW HEIGHT, CRES, 125 KSI Ftu, 450 癋& 800 癋 Rev 1 [Superseded: DLA MS21068 REV F CANC NOTICE 1, DLA MS21068 REV F, DLA MS21068 REV E, DLA MS21068 REV D]
AIA/NAS NA0152-2011 BOLT, EYE, ALLOY STEEL, 1100 MPa, METRIC Rev 2
AIA/NAS NASM51575-2011 SCREW, SHOULDER, SLOTTED-HEAD, CRES Rev 1 [Superseded: DLA MS51575 REV A CANC NOTICE 1, DLA MS51575 REV A, DLA MS51575]
AIA/NAS NAS1763-2012 TEE, REDUCER, FLARELESS TUBE TO SWIVEL, SWIVEL ON RUN Rev 3
AIA/NAS NAS1589-1975 Fasteners - Threaded, Corrosion& Heat Resistant, 1200 Degrees F, Procurement Specification for Rev 1
AIA/NAS NASM21056-2011 NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125 KSI Ftu, 450 掳F& 800 掳F Rev 1 [Superseded: DLA MS21056 REV F CANC NOTICE 1, DLA MS21056 REV F, DLA MS21056 REV E, DLA MS21056 REV D, DLA MS21056 REV C]
AIA/NAS NASM51981-2011 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, CADMIUM PLATED, UNC-3A Rev 1 [Superseded: DLA MS51981 REV C CANC NOTICE 1, DLA MS51981 REV C, DLA MS51981 REV B, DLA MS51981 REV A, DLA MS51981]
AIA/NAS NA0071-2011 BOLT, ALLOY STEEL, 1550 MPa TENSILE, PROCUREMENT SPECIFICATION Rev 2
AIA/NAS NAS1071-1978 Switch - Toggle Double Pole, Three Position Rev 2
AIA/NAS NAS0332-2012 BEARING RETENTION SLEEVE, GROOVED OUTER FACE Rev 1
AIA/NAS NASM21069-2010 NUT, SELF-LOCKING, PLATE, TWO-LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI Ftu, 450 癋 REV 1 [Superseded: DLA MS21069 REV G CANC NOTICE 1, DLA MS21069 REV G, DLA MS21069 REV F, DLA MS21069 REV E, DLA MS21069 REV D, DLA MS21069 REV C]
AIA/NAS NASM10971-2011 PIN, SPRING, TUBULAR, COILED AND SLOTTED Rev 1 [Superseded: DLA MIL-P-10971 E CANC NOTICE 1, DLA MIL-P-10971 E (3), DLA MIL-P-10971 E (2), DLA MIL-P-10971 E (1), DLA MIL-P-10971 E, DLA MIL-P-10971 D, DLA MIL-P-10971 C, DLA MIL-P-10971 B (1), DLA
AIA/NAS NA0148-2011 INSERT, SCREW THREAD, KEY LOCKED, ALLOY STEEL, LIGHTWEIGHT, METRIC Rev 2
AIA/NAS NASM14214-2012 NUT ELEMENT, ATTACHED RETENTION ELEMENT (A.R.E.), 450 癋, STEEL, AISI 1050 OR 4130, 125 KSI Ftu Rev 1 [Superseded: DLA MS14214 REV A CANC NOTICE 1, DLA MS14214 REV A, DLA MS14214]
AIA/NAS NAS597-2012 FITTINGS, RIGID TUBE CONNECTOR, FLARED TUBE Rev 4
AIA/NAS NASM33737-2011 NUT, SHEET SPRING, INSTRUMENT MOUNTING Rev 1 [Superseded: DLA MS33737 REV B CANC NOTICE 1, DLA MS33737 REV B (1), DLA MS33737 REV B, DLA MS33737 REV A, DLA MS33737]
AIA/NAS NASM21224-2010 NUT, SELF-LOCKING, CASTELLATED, HEXAGON, COUNTERBORED, ASSEMBLED WASHER, 250 癋, NON-METALLIC INSERT (FOR SELF-RETAINING BOLTS) Rev 1 [Superseded: DLA MS21224 REV D CANC NOTICE 1, DLA MS21224 REV D, DLA MS21224 REV C, DLA MS21224 REV B, DLA MS21224
AIA/NAS NAS671-2010 NUT, PLAIN, HEXAGON, SMALL PATTERN, NONSTRUCTURAL Rev 7
AIA/NAS NASM1312-2012 FASTENER TEST METHODS Rev 1 [Superseded: NAVY MIL-STD-1312B CANC NOTICE 1, NAVY MIL-STD-1312B, NAVY MIL-STD-1312A, NAVY MIL-STD-1312 NOTICE 9, NAVY MIL-STD-1312 NOTICE 8, NAVY MIL-STD-1312 NOTICE 7, NAVY MIL-STD-1312 NOTICE 6, NAVY MIL-STD-1312 NOTICE 5,
ECSS-Q-ST-10-04C Critial-item control
ECSS-E-ST-60-30C Satellite attitude and orbit control system (AOCS) requirements
ECSS-E-ST-40C Software
ECSS-E-ST-35-02C Solid propulsion for spacecrafts and launchers
ECSS-E-ST-50-04C Space data links - Telecommand protocols, synchronization and channel coding
ECSS-Q-ST-70-71C Materials, processes and their data selection
ECSS-Q-ST-70-18C Preparation, assembly and mounting of RF coaxial cables
ECSS-Q-ST-30C Dependability
776140 条记录 10966/15523 页 第一页 <上一页  10962   10963   10964   10965  10966  10967   10968   10969   10970  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。