检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NA0129-2012 SCREW, CAPTIVE, 100?FLUSH HEAD, OFFSET CRUCIFORM RECESS, TITANIUM, 660 MPa SHEAR, METRIC Rev 3
AIA/NAS NAS2055-2062-2012 PIN, RIVET, GROOVED, TITANIUM, COMPOSITE APPLICATIONS, 100?FLUSH HEAD, STUMP TYPE Rev 1
AIA/NAS NAS1766-2011 NUT, SELF-LOCKING, PLATE, CORNER, COUNTERBORED, FLOATING, 125 KSI Ftu, 450 掳F AND 800 掳F Rev 2
AIA/NAS NASM51576-2010 SCREW, SHOULDER, SOCKET-HEAD, HEXAGON, CORROSION-RESISTANT STEEL Rev 1 [Superseded: DLA MS51576 REV A CANC NOTICE 1, DLA MS51576 REV A, DLA MS51576]
AIA/NAS NASM82496-2011 SCREWS, MACHINE, SELF-SEALING, INTEGRAL O-RING Rev 1
AIA/NAS NASM91528-2012 KNOBS, CONTROL, PLASTIC, ROUND, CONCENTRIC, POINTER, SPINNER, SPINNER SLIP-CLUTCH, BAR, TACTILE, KNOB LOCK POINTER, SLIP-CLUTCH, AND KNOB LOCKS Rev 1 [Superseded: DLA MS91528 REV J CANC NOTICE 3, DLA MS91528 REV J NOTICE 2, DLA MS91528 REV J VALID NOT
AIA/NAS NASM63540-2012 STUD, SELF-CLINCHING GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-S-63540 C CANC NOTICE 3, DLA MIL-S-63540 C NOTICE 2, DLA MIL-S-63540 C NOTICE 1, DLA MIL-S-63540 C, DLA MIL-S-63540 B SUPP 1, DLA MIL-S-63540 B, DLA MIL-S-63540 A SUPP 1, DL
AIA/NAS NAS1732-2012 NUT, BLIND, SERRATED HEAD, SELF-LOCKING, CLOSED END, 450 癋 Rev 2
AIA/NAS NAS1042-2011 SHACKLE, ANCHOR, FORGED CARBON STEEL, ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) Rev 3
AIA/NAS NASM27039-2009 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS Rev 3
AIA/NAS NAS6203-6220-2009 BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, ALLOY STEEL, SHORT THREAD, REDUCED MAJOR THREAD DIA., SELF-LOCKING AND NONLOCKING, 160 KSI Ftu Rev 9 [Replaced: AIA/NAS NAS1103-1120, AIA/NAS NAS1103-1120]
AIA/NAS NAS3452-1982 Reels, Filament Tape, Packaging of Rev 1
AIA/NAS NASM51974-2011 SETSCREW, HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3A, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS51974 REV B CANC NOTICE 2, DLA MS51974 REV B VALID NOTICE 1, DLA MS51974 REV B, DLA MS51974 REV A]
AIA/NAS NASM21065-2011 NUT, SELF-LOCKING, CHANNEL, FLOATING, LOW HEIGHT, CRES, 125 KSI Ftu, 450 掳F& 800 掳F Rev 1 [Superseded: DLA MS21065 REV E CANC NOTICE 1, DLA MS21065 REV E, DLA MS21065 REV D, DLA MS21065 REV C, DLA MS21065 REV B]
AIA/NAS NASM3926/1-2012 KNOB, CONTROL, BALL Rev 1 [Superseded: DLA MIL-K-3926/1 A CANC NOTICE 2, DLA MIL-K-3926/1 A NOTICE 1, DLA MIL-K-3926/1 A, DLA MIL-K-3926/1]
AIA/NAS NASM85449-2011 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHION, GENERAL SPECIFICATION FOR Rev 1 [Superseded: NAVY MIL-C-85449 CANC NOTICE 1, NAVY MIL-C-85449 (2), NAVY MIL-C-85449 (1), NAVY MIL-C-85449]
AIA/NAS NAS359-2012 TUBE ASSEMBLY, CONTROL, STEEL, WITH WELDED CLEVIS AND THREADED ROD ENDS Rev 7
AIA/NAS NASM17985-2012 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, 揟?HANDLE Rev 1 [Superseded: DLA MS17985 REV G CANC NOTICE 1, DLA MS17985 REV G, DLA MS17985 REV F, DLA MS17985 REV E, DLA MS17985 REV D, DLA MS17985 REV C]
AIA/NAS NAS410-2008 NAS Certification& Qualification of Nondestructive Test Personnel REV 3 [Replaced: AIR FORCE MIL-STD-410 E CANC NOTICE 2, AIR FORCE MIL-STD-410 E CANC NOTICE 1, AIR FORCE MIL-STD-410 E, AIR FORCE MIL-STD-410 D NOTICE 2, AIR FORCE MIL-STD-410 D NOTIC
AIA/NAS NAS1261-1265-2010 BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, SHORT THREAD, TITANIUM ALLOY, 160 KSI Ftu Rev 6
AIA/NAS NAS936-2012 MILLING MACHINE ?PRECISION BED-TYPE HORIZONTAL AND VERTICAL SPINDLES Rev 1
AIA/NAS NAS97-1946 Welded Assembly - Tube, 3/8 O.D., Steel, Clevis and Threaded Rod Ends Rev 1 [Refer To: AIA/NAS NAS359]
AIA/NAS NAS1691-2012 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE, FLARELESS Rev 1
AIA/NAS NA0060-2011 SCREW, CLOSE TOLERANCE, 100掳 FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 750 MPa SHEAR, METRIC Rev 4
AIA/NAS NASM3214-2011 NUT, PLAIN, CLINCH, FLUSH Rev 1 [Superseded: DLA MS3214 CANC NOTICE 1, DLA MS3214 (1), DLA MS3214]
AIA/NAS NASM15795-2010 WASHER, FLAT, METAL, ROUND GENERAL PURPOSE Rev 1 [Superseded: DLA MS15795 REV G CANC NOTICE 1, DLA MS15795 REV G, DLA MS15795 REV F, DLA MS15795 REV E]
AIA/NAS NA0247-2011 BEARING, PLAIN, SELF LUBRICATING, SELF-ALIGNING LOW SPEED, NARROW, GROOVED OUTER RING, -54 癈 TO 163 癈, METRIC Rev 2
AIA/NAS NAS5316-2012 SCREW, SHEAR, 100?FLUSH HEAD, CLOSE TOLERANCE, SELF-LOCKING, NAS1800 SIX LOBE RECESS, 95 KSI FSU Rev 1
AIA/NAS NASM45938/11-2012 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (FLOATING, 400 癋) Rev 1 [Superseded: DLA MIL-DTL-45938/11 A CANC NOTICE 1, DLA MIL-DTL-45938/11 A, DLA MIL-N-45938/11 (1), DLA MIL-N-45938/11]
AIA/NAS NASM24665-2011 PIN, COTTER (SPLIT) Rev 1 [Superseded: DLA MS24665 REV F CANC NOTICE 2, DLA MS24665 REV F VALID NOTICE 1, DLA MS24665 REV F, DLA MS24665 REV E, DLA MS24665 REV D, DLA MS24665 REV C, DLA MS24665 REV B, DLA MS24665]
AIA/NAS NASM51939-2012 LOOP, STRAP FASTENER (FOOTMAN'S LOOP) Rev 1 [Superseded: DLA MS51939 REV A CANC NOTICE 4, DLA MS51939 REV A NOTICE 3, DLA MS51939 REV A NOTICE 2, DLA MS51939 REV A VALID NOTICE 1, DLA MS51939 REV A, DLA MS51939]
AIA/NAS NAS174-2002 Bolt-Internal Wrenching-Steel 1.3750-12 Rev 9
AIA/NAS NASM43770/4-2011 SNAP HOOKS, CAST BODY, FIXED LOOP EYE WITH ROLLER, FLAT SPRING CLOSURE, WIDE MOUTH Rev 1 [Superseded: DLA MIL-S-43770/4 CANC NOTICE 3, DLA MIL-S-43770/4 CANC NOTICE 2, DLA MIL-S-43770/4 VALID NOTICE 1, DLA MIL-S-43770/4]
AIA/NAS NAS592-2012 RING, RIGID TUBE CONNECTOR, ALUMINUM Rev 6
AIA/NAS NASM81177/2-2011 FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, THREADED, SELF LOCKING, 100 DEGREE FLUSH HEAD, 450 癋, ALLOY STEEL 112 KSI Fsu Rev 1 [Superseded: DLA MIL-F-81177/2 CANC NOTICE 2, DLA MIL-F-81177/2 VALID NOTICE 1, DLA MIL-F-81177/2]
AIA/NAS NAS1094-1959 Strip - Terminal Board Base Insulating Rev 1 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM16555-2010 Pin, Straight, Headless (Dowel) (.0002 Over Nominal Size) Rev 1
AIA/NAS NASM51982-2011 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3A Rev 1 [Superseded: DLA MS51982 REV A CANC NOTICE 1, DLA MS51982 REV A]
AIA/NAS NASM16562-2010 PIN, SPRING, TUBULAR, SLOTTED Rev 1 [Superseded: DLA MS16562 REV C CANC NOTICE 2, DLA MS16562 REV C VALID NOTICE 1, DLA MS16562 REV C, DLA MS16562 REV B, DLA MS16562 REV A, DLA MS16562]
AIA/NAS NASM28728/3-2011 DIAL, CONTROL, MULTITURN COUNTERS, 10 - TURN COUNTER, CONCENTRIC (1.810 - INCH DIAMETER) Rev 1 [Superseded: DLA MIL-D-28728/3 A CANC NOTICE 3, DLA MIL-D-28728/3 A NOTICE 2, DLA MIL-D-28728/3 A, DLA MIL-D-28728/3 (1), DLA MIL-D-28728/3]
AIA/NAS NASM24373-2012 CASTERS, RIGID AND SWIVEL, PRECISION, PNEUMATIC TIRED [Superseded: DLA MS24373 REV A CANC NOTICE 1, DLA MS24373 REV A, DLA MS24373]
AIA/NAS NAS1638-2011 CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS Rev 4 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, SAE AS4059E, SAE AS4059E, SAE AS4059D, SAE AS4059C, SAE AS4059B]
AIA/NAS NASM21315-2011 STRAP, RETAINING, TWO HOLE, FOR TUBING Rev 3 [Superseded: DLA MS21315 REV A CANC NOTICE 1, DLA MS21315 REV A]
AIA/NAS NA0156-2012 MALE THREADED FASTENERS, METRIC DESIGN, PARAMETERS FOR Rev 1
AIA/NAS NAS9300-007-2012 LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA PART 007: TERMS AND REFERENCES
AIA/NAS NAS1792-2002 Nut, Self-Locking, Plate - One Lug, Floating, Variable Counterbore, Replaceable Nut Element 125KSI Ftu, 450 Degrees F and 800 Degrees F Rev 2
AIA/NAS NASM51864-2011 STUD, PLAIN, GENERAL PURPOSE Rev 1 [Superseded: DLA MS51864 CANC NOTICE 2, DLA MS51864 (1), DLA MS51864 VALID NOTICE 1, DLA MS51864]
AIA/NAS NAS24-2012 TERMINAL, TANK STRAP, FORKED Rev 5
AIA/NAS NASM17988-2011 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, 揟?HANDLE Rev 1 [Superseded: DLA MS17988 REV E CANC NOTICE 1, DLA MS17988 REV E, DLA MS17988 REV D, DLA MS17988 REV C]
AIA/NAS NASM21384-2011 KNOB, POINTER, ILLUMINATED AND NON-ILLUMINATED Rev 1 [Superseded: DLA MS21384 REV E CANC NOTICE 2, DLA MS21384 REV E NOTICE 1, DLA MS21384 REV E, DLA MS21384 REV D, DLA MS21384 REV C, DLA MS21384 REV B, DLA MS21384 REV A, DLA MS21384]
776140 条记录 10962/15523 页 第一页 <上一页  10958   10959   10960   10961  10962  10963   10964   10965   10966  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。