检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NAS1742-1981 Screw, Self-Locking - Pan Head, Full Thread, Patch Type Rev.2 [Superseded By: AIA/NAS NAS1190, AIA/NAS NAS1190, AIA/NAS NAS1190, AIA/NAS NAS1190, AIA/NAS NAS1190, AIA/NAS NAS1190, AIA/NAS NAS1190]
AIA/NAS NAS28-1980 Bolt-Tee Head Rev 6 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM35308-2010 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNF-2A Rev 1 [Superseded: DLA MS35308 REV E CANC NOTICE 2, DLA MS35308 REV E (1), DLA MS35308 REV E VALID NOTICE 1, DLA MS35308 REV E, DLA MS35308 REV D, DLA M
AIA/NAS NASM35207-2010 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, CADMIUM PLATED, UNF-2A (IN./MM) Rev 2 [Superseded: DLA MS35207 REV F CANC NOTICE 1, DLA MS35207 REV F (2), DLA MS35207 REV F (1), DLA MS35207 REV F, DLA MS35207 REV E, DLA MS35207 REV D, DLA
AIA/NAS NAS10000-2013 NA DOCUMENTS PREPARATION AND MAINTENANCE IN SI (METRIC) UNITS Rev 3
AIA/NAS NAS1992-2000-1986 Bolt, Flat, 100 Degree Reduced Head, Torq-Set and Hi-Torque, 108 ksi Shear Rev. 6
AIA/NAS NASM14179-2011 NUT, PLATE, SELF-LOCKING, FLOATING, TWO LUG, REDUCED RIVET SPACING, STEEL, (POLYIMIDE INSERT) 500 CYCLES REUSE, REPLACEABLE NUT, 160 KSI Ftu, 450 掳F Rev 1 [Superseded: DLA MS14179 REV A CANC NOTICE 2, DLA MS14179 REV A (1), DLA MS14179 REV A VALID NO
AIA/NAS NASM90725-2011 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, GRADE 5, CADMIUM PLATED, UNC-2A Rev 2 [Superseded: DLA MS90725 REV D CANC NOTICE 1, DLA MS90725 REV D (2), DLA MS90725 REV D (1), DLA MS90725 REV D VALID NOTICE 1, DLA MS90725 REV D]
AIA/NAS NAS5312-2012 SCREW, 100 DEG FLUSH HEAD, FULL THREAD, NAS1800 SIX LOBE RECESS, SELF-LOCKING AND NON-LOCKING Rev 1
AIA/NAS NAS451-2010 PLUG, BUTTON Rev 3
AIA/NAS NAS1287-2011 NUT, EXTENDED WASHER, HEXAGON, SELF-LOCKING, LOW HEIGHT, C'BORE Rev 6
AIA/NAS NASM51932-2011 PIN, STRAIGHT, HEADLESS, DRILLED FOR COTTER PINS Rev 1 [Superseded: DLA MS51932 CANC NOTICE 2, DLA MS51932 VALID NOTICE 1, DLA MS51932]
AIA/NAS NASM122236-122275-2011 INSERT, CRES HELICAL COIL COARSE THREAD, 3 DIA NOMINAL LENGTH Rev 1 [Superseded: DLA MS122236 THRU MS122275 REV D CANC NOTICE 1, DLA MS122236 THRU MS122275 REV D, DLA MS122236 THRU MS122275 REV C]
AIA/NAS NASM16556-2010 PIN, STRAIGHT, HEADLESS (DOWEL) (.001 OVER NOMINAL SIZE) Rev 1 [Superseded: DLA MS16556 REV B CANC NOTICE 2, DLA MS16556 REV B (1), DLA MS16556 REV B VALID NOTICE 1, DLA MS16556 REV B, DLA MS16556 REV A, DLA MS16556]
AIA/NAS NAS6984-6992-2012 PIN, SWAGE LOCKING, A286 CRES, PROTRUDING HEAD, SHEAR, STUMP-TYPE Rev 3
AIA/NAS NASM85449/3-2012 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHIONED, SILICONE RUBBER, FABRIC REINFORCED, 321 CRES, 500 癋, GENERAL PURPOSE Rev 2 [Superseded: NAVY MIL-C-85449/3 B CANC NOTICE 1, NAVY MIL-C-85449/3 B, NAVY MIL-C-85449/3 A, NAVY MIL-C-85449/3]
AIA/NAS NASM21093-2011 SCREW, SELF-LOCKING, 250 癋, STEEL, 55 KSI Ftu, 100?FLAT HEAD, CROSS RECESSED Rev 1 [Superseded: DLA MS21093 REV B CANC NOTICE 2, DLA MS21093 REV B VALID NOTICE 1, DLA MS21093 REV B, DLA MS21093 REV A]
AIA/NAS NASM17987-2011 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, RING HANDLE Rev 1 [Superseded: DLA MS17987 REV G CANC NOTICE 1, DLA MS17987 REV G, DLA MS17987 REV F, DLA MS17987 REV E, DLA MS17987 REV D, DLA MS17987 REV C]
AIA/NAS NASM24066/2-2011 CLIP, SOLID, SPRING TENSION Rev 1 [Superseded: DLA MIL-C-24066/2 E CANC NOTICE 2, DLA MIL-C-24066/2 E VALID NOTICE 1, DLA MIL-C-24066/2 E, DLA MIL-C-24066/2 D, DLA MIL-C-24066/2 C, DLA MIL-C-24066/2 B, DLA MIL-C-24066/2 A, DLA MIL-C-24066/2]
AIA/NAS NAS713-1981 Connectors, Electrical, for Printed Wiring Rev 2
AIA/NAS NA0119-0120-2010 BRACKET, 90 DEGREE ANGLE, 2-BOLT ATTACH, METRIC Rev 1
AIA/NAS NAS198-2012 KNOB, CONTROL, 1.25 SPHERICAL, PLASTIC Rev 4
AIA/NAS NASM51958-2010 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CORROSION RESISTING STEEL, UNF-2A Rev 1 [Superseded: DLA MS51958 REV C CANC NOTICE 1, DLA MS51958 REV C (1), DLA MS51958 REV C, DLA MS51958 REV B, DLA MS51958]
AIA/NAS NAS579-2012 INVOLUTE SPLINE, 30?FULL FILLET Rev 2
AIA/NAS NAS540-2012 INVOLUTE SPLINES, 45?PRESSURE ANGLE, LOOSE FIT Rev 4
AIA/NAS NAS1803-2011 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, SPRING LOADED Rev 2
AIA/NAS NA0007-2013 METRIC FASTENERS, TITANIUM ALLOY, EXTERNALLY THREADED, 1100 MPa TENSILE, 660 MPa SHEAR Rev 3
AIA/NAS NAS1760-2011 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR Rev 5
AIA/NAS NAS36-1980 Rod End, Spherical Bearing 3/16 Bore x 1/4 - 28 Interchangeable Type Rev 2 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]
AIA/NAS NASM21045-2013 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 450 篎, 125 KSI Ftu Rev 3
AIA/NAS NAS1410-2011 NUT, UNIVERSAL PORT FITTING Rev 5
AIA/NAS NAS6803-6820-2009 BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, 6AL-4V TITANIUM ALLOY, LONG THREAD, REDUCED MAJOR THREAD DIAMETER, SELF-LOCKING AND NONLOCKING, 160 KSI Ftu Rev 8
AIA/NAS NA0037-2011 BOLT, TENSION, CLOSE TOLERANCE, HEXAGON HEAD, TITANIUM ALLOY, 1100 MPa Ftu, METRIC Rev 3
AIA/NAS NASM39086-2012 PIN, SPRING, TUBULAR, COILED, HEAVY DUTY Rev 1 [Superseded: DLA MS39086 REV B CANC NOTICE 2, DLA MS39086 REV B VALID NOTICE 1, DLA MS39086 REV B, DLA MS39086 REV A]
AIA/NAS NASM85643/5-2012 BIT, SCREWDRIVER, INSERT TYPE, RIBBED, OFFSET CRUCIFORM, EXTERNAL HEXAGON SHANK, MANUALLY DRIVEN Rev 1 [Superseded: NAVY MIL-B-85643/5 CANC NOTICE 1, NAVY MIL-B-85643/5]
AIA/NAS NASM91525-2011 KNOB, CONTROL, BAR, METAL AND PLASTIC Rev 1 [Superseded: DLA MS91525 REV F CANC NOTICE 2, DLA MS91525 REV F NOTICE 1, DLA MS91525 REV F, DLA MS91525 REV E, DLA MS91525 REV D, DLA MS91525 REV C, DLA MS91525 REV B]
AIA/NAS NAS495-1958 Bolt - Internal Wrenching (High Tensile and High Fatigue Strength) Superseded - March 1958 Rev 2
AIA/NAS NAS939-2012 PRESS - HYDRAULIC, TYPE I SINGLE ACTION RAM WITH DIE CUSHION Rev 1
AIA/NAS NA0154-2011 RIVETS, SOLID, ALUMINUM AND ALUMINUM ALLOY, METRIC, PROCUREMENT SPECIFICATION FOR Rev 1
AIA/NAS NAS930-2012 STRETCH FORMING MACHINES - AIRFRAMES Rev 3
AIA/NAS NAS1370-1379-2011 DUCT, AIR, FLEXIBLE, HELIX WIRE SUPPORTED Rev 3
AIA/NAS NA0127-2012 SCREW, CAPTIVE, 100?FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC Rev 2
AIA/NAS NASM51096-2011 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNF-2A, PLAIN AND SELF-LOCKING Rev 1 [Superseded: DLA MS51096 REV E CANC NOTICE 2, DLA MS51096 REV E VALID NOTICE 1, DLA MS51096 REV E, DL
AIA/NAS NASM16995-2010 SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A Rev 1 [Superseded: DLA MS16995 REV H CANC NOTICE 1, DLA MS16995 REV H, DLA MS16995 REV G, DLA MS16995 REV F, DLA MS16995 REV E, DLA MS16995 REV D, DLA MS16995 REV C]
AIA/NAS NA0113-2011 SCREW, HEX HEAD, OFFSET CRUCIFORM RECESS, TITANIUM, FULL THREAD, 1100 MPa, METRIC Rev 6
AIA/NAS NASM85449/4-2012 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHIONED, PTFE, 321 CRES, -320 癋 TO 450 癋, GENERAL PURPOSE Rev 2 [Superseded: NAVY MIL-C-85449/4 A CANC NOTICE 1, NAVY MIL-C-85449/4 A, NAVY MIL-C-85449/4]
AIA/NAS NAS3453-1975 Fasteners, Aerospace, Packaging of
AIA/NAS NAS1065-1978 Stud - High Temperature Electrical Terminal Block Rev 2
AIA/NAS NASM122156-122195-2010 INSERT, CRES, HELICAL COIL, COARSE THREAD, 2 DIA NOMINAL LENGTH Rev 1 [Superseded: DLA MS122156 THRU MS122195 REV D CANC NOTICE 1, DLA MS122156 THRU MS122195 REV D, DLA MS122156 THRU MS122195 REV C]
AIA/NAS NASM43770/2-2011 SNAP HOOKS, WIRE BODY, FIXED LOOP EYE, SIDE RETAINING CLOSURE Rev 1 [Superseded: DLA MIL-S-43770/2 A CANC NOTICE 2, DLA MIL-S-43770/2 A CANC NOTICE 1, DLA MIL-S-43770/2 A, DLA MIL-S-43770/2]
776140 条记录 10964/15523 页 第一页 <上一页  10960   10961   10962   10963  10964  10965   10966   10967   10968  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。