（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NASM16187-2012 | STUD, CONTINUOUS THREAD, BOLT-STUD, B16 ALLOY STEEL, HIGH TEMPERATURE SERVICE 875-1,000 癋 [Superseded: DLA MS16187 REV B CANC NOTICE 1, DLA MS16187 REV B] | ||||
| AIA/NAS NASM21044-2010 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT 250 DEGREES F, 125 KSI Ftu and 60 KSI Ftu Rev 1 [Superseded: DLA MS21044 REV H CANC NOTICE 1, DLA MS21044 REV H, DLA MS21044 REV G, DLA MS21044 REV F, DLA MS21044 REV E, DLA MS21044 REV D, DLA MS21044 REV | ||||
| AIA/NAS NAS519-1983 | Stylus-100 Degree Flat Head Gage Rev 1 | ||||
| AIA/NAS NAS1198-2011 | RIVET, SOLID, UNIVERSAL HEAD, A286 CORROSION RESISTANT STEEL Rev 6 | ||||
| AIA/NAS NAS986-2001 | End Mills, Finishing, High Speed Steel .125 Inch Thru 3.000 Inch Diameter Rev. 3 | ||||
| AIA/NAS NASM35273-2012 | SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, BRASS, BLACK CHEMICAL FINISH, UNC-2A Rev 1 [Superseded: DLA MS35273 REV C CANC NOTICE 2, DLA MS35273 REV C (1), DLA MS35273 REV C VALID NOTICE 1, DLA MS35273 REV C] | ||||
| AIA/NAS NASM21297-2010 | BOLT, TENSION, STEEL, 220 KSI FTU, 450 DEGREES F, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD Rev 2 [Superseded: DLA MS21297 REV A CANC NOTICE 4, DLA MS21297 REV A NOTICE 3, DLA MS21297 REV A NOTICE 2, DLA MS21297 REV A VALID NOTICE 1, DLA MS21297 | ||||
| AIA/NAS NAS596-2011 | NUT, RIGID TUBE CONNECTOR, CRES Rev 6 | ||||
| AIA/NAS NASM35203-2012 | SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82? CRUCIFORM RECESS, ALUMINUM ALLOY, ANODIC COATED, UNF-2A Rev 1 [Superseded: DLA MS35203 REV B CANC NOTICE 2, DLA MS35203 REV B VALID NOTICE 1, DLA MS35203 REV B, DLA MS35203 REV A, DLA MS35203] | ||||
| AIA/NAS NASM45938/4-2011 | NUT, PLAIN, SELF-CLINCHING FLUSH Rev 1 [Superseded: DLA MIL-N-45938/4 A CANC NOTICE 1, DLA MIL-N-45938/4 A, DLA MIL-N-45938/4] | ||||
| AIA/NAS NAS550-2011 | FITTING, INSTALLATION OF UNIVERSAL ELBOW Rev 7 | ||||
| AIA/NAS NAS562-2011 | CAM FOLLOWER NEEDLE BEARING, HIGH STRENGTH STUD Rev 8 | ||||
| AIA/NAS NA0180-0183-2012 | SPACER, SLEEVE, SCREW AND BOLT, METRIC Rev 1 | ||||
| AIA/NAS NAS1199-2011 | RIVET, SOLID, 100?FLUSH HEAD, A286 CORROSION RESISTANT STEEL Rev 5 | ||||
| AIA/NAS NA0042-2011 | SCREW, CLOSE TOLERANCE, 100掳 FLUSH HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC Rev 4 | ||||
| AIA/NAS NASM81177-2011 | FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, ALLOY STEEL, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-F-81177 E CANC NOTICE 1, DLA MIL-F-81177 E (4), DLA MIL-F-81177 E (3), DLA MIL-F-81177 E (2), DLA MIL-F-81177 E (1), DLA MIL-F-81 | ||||
| AIA/NAS NAS9603-9624-2012 | BOLT, HEXAGON HEAD, A286 CRES, CLOSE TOLERANCE, MINIMUM MAJOR, LONG THREADS Rev 1 | ||||
| AIA/NAS NASM21333-2011 | CLAMP, LOOP, STEEL, PLAIN AND CUSHIONED Rev 1 [Superseded: DLA MS21333 REV F CANC NOTICE 1, DLA MS21333 REV F, DLA MS21333 REV E] | ||||
| AIA/NAS NASM85643-2012 | BITS, SCREWDRIVER, RIBBED, GENERAL SPECIFICATION FOR Rev 1 [Superseded: NAVY MIL-B-85643 CANC NOTICE 1, NAVY MIL-B-85643 SUPP 1, NAVY MIL-B-85643] | ||||
| AIA/NAS NAS424-2012 | COUPLING, TUBE, FLARED FITTING, FEMALE THREAD Rev 4 | ||||
| AIA/NAS NAS5314-2011 | SCREW, SHEAR, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS1800 SIX LOBE RECESS, 95 KSI FSU Rev 1 | ||||
| AIA/NAS NAS1033-2011 | NUT, SELF-LOCKING, PLATE, RIGHT ANGLE, REGULAR HEIGHT, CBORE, FLOATING Rev 6 | ||||
| AIA/NAS NA0221-0224-2011 | POST, ELECTRICAL-MECHANICAL EQUIPMENT, INTERNAL THREAD TYPE, METRIC Rev 1 | ||||
| AIA/NAS NA0093-0094-2011 | NUT, SELF-LOCKING, FLOATING, PLATE, CORNER, LOW HEIGHT, CBORED, 1100 MPa, METRIC, 235 癈, 425 癈 Rev 2 | ||||
| AIA/NAS NASM21051-2010 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 Degrees F Rev 2 [Superseded: DLA MS21051 REV G CANC NOTICE 1, DLA MS21051 REV G (1), DLA MS21051 REV G, DLA MS21051 REV F, DLA MS21051 REV E, DLA MS21051 REV D, DLA MS21051 REV | ||||
| AIA/NAS NASM43770/1-2011 | SNAP HOOKS, WIRE BODY, FIXED LOOP EYE, FLAT SPRING CLOSURE, WITH RETAINER Rev 1 [Superseded: DLA MIL-S-43770/1 A CANC NOTICE 3, DLA MIL-S-43770/1 A CANC NOTICE 2, DLA MIL-S-43770/1 A VALID NOTICE 1, DLA MIL-S-43770/1 A, DLA MIL-S-43770/1] | ||||
| AIA/NAS NAS1590-1984 | Pin, Hi-Shear Rivet, 1200 Degrees F Rev 2 | ||||
| AIA/NAS NASM51400-2011 | PIN, STRAIGHT, HEADLESS Rev 1 [Superseded: DLA MS51400 CANC NOTICE 2, DLA MS51400 VALID NOTICE 1, DLA MS51400] | ||||
| AIA/NAS NAS1744-2011 | SPLICE, CONDUCTOR, SOLDER STYLE, HOT AIR OR INFRARED, SHRINKABLE, INSULATED, IMMERSION RESISTANT Rev 4 | ||||
| AIA/NAS NAS609-1962 | Screws-Socket Head Cap (Non-Preferred Thread) Rev 2 [Refer To: AIA/NAS NAS1351, AIA/NAS NAS1351, AIA/NAS NAS1352, AIA/NAS NAS1352, AIA/NAS NAS1352] | ||||
| AIA/NAS NAS494-2011 | TERMINAL, BALL TYPE CABLE Rev 3 | ||||
| AIA/NAS NASM20392-2011 | PIN, STRAIGHT, HEADED DRILLED SHANK Rev 1 [Superseded: DLA MS20392 REV F CANC NOTICE 1, DLA MS20392 REV F, DLA MS20392 REV E VALID NOTICE 1, DLA MS20392 REV E, DLA MS20392 REV D, DLA MS20392 REV C, DLA MS20392 REV B, DLA MS20392 REV A, DLA MS2039 | ||||
| AIA/NAS NA0241-2011 | INSERT, SANDWICH PANEL, MOLDED IN, BLIND THREADED, SELF-LOCKING, CRES, LIGHTWEIGHT, METRIC Rev 1 | ||||
| AIA/NAS NASM51896-2012 | SCREW, EXTERNALLY RELIEVED BODY, PAN HEAD, CRUCIFORM RECESS, CRES, UNC-2A Rev 2 [Superseded: DLA MS51896 REV A CANC NOTICE 1, DLA MS51896 REV A (1), DLA MS51896 REV A, DLA MS51896] | ||||
| AIA/NAS NAS2115-2122-2012 | BOLT, LOCK, TENSION, 100?HEAD (MS20426), STANDARD AND OVERSIZE, PULL-TYPE, TITANIUM ALLOY Rev 1 | ||||
| AIA/NAS NAS3103-3110-2011 | BOLT, U Rev 3 | ||||
| AIA/NAS NAS412-1997 | Foreign Object Damage/Foreign Object Debris (FOD) Prevention | ||||
| AIA/NAS NAS4445-2012 | NUT, CRIMP, FOR CRIMPLOCK FASTENER SYSTEM Rev 4 | ||||
| AIA/NAS NA0052-2012 | RIVET, SOLID, UNIVERSAL HEAD, NICKEL-COPPER, METRIC Rev 1 | ||||
| AIA/NAS NASM43770/11-2011 | SNAP HOOKS, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, LIGHT DUTY Rev 1 [Superseded: DLA MIL-S-43770/11 CANC NOTICE 3, DLA MIL-S-43770/11 CANC NOTICE 2, DLA MIL-S-43770/11 VALID NOTICE 1, DLA MIL-S-43770/11] | ||||
| AIA/NAS NASM6812-2012 | FASTENERS, EXTERNALLY THREADED, ALLOY STEEL, CORROSION RESISTANT STEEL, ALUMINUM, 60,000 PSI TO 125,000 PSI Rev 3 [Superseded: DLA MIL-B-6812 E CANC NOTICE 1, DLA MIL-B-6812 E, DLA MIL-B-6812 D, DLA MIL-B-6812 C (1), DLA MIL-B-6812 C, DLA MIL-B-6812 | ||||
| AIA/NAS NAS1219-2009 | SCREW, 100?FLUSH HEAD, DOVETAIL SLOT RECESS, FULL THREAD, SELF-LOCKING OPTIONAL Rev 10 | ||||
| AIA/NAS NAS6603-6620-2009 | BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, REDUCED MAJOR DIA., SELF-LOCKING AND NONLOCKING, 160 KSI Ftu Rev 8 | ||||
| AIA/NAS NASM310-2012 | NUT, PLAIN, CASTELLATED, AIRFRAME Rev 1 [Superseded: DLA AN310 REV 10 CANC NOTICE 2, DLA AN310 REV 10 NOTICE 1, DLA AN310 REV 10, DLA AN310 REV 9, DLA AN310 REV 8, DLA AN310 REV 7] | ||||
| AIA/NAS NA0131-2012 | SCREW, CAPTIVE, PAN HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC Rev 2 | ||||
| AIA/NAS NAS5-1984 | Rod End, Threaded, Alloy Steel, Flash Welding Type Rev 7 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380] | ||||
| AIA/NAS NAS1770-2011 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CBORE, 160 KSI, 450 癋, 800 癋 Rev 2 | ||||
| AIA/NAS NAS6703-6720-2009 | BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, A286 CRES, LONG THREAD, REDUCED MAJOR THREAD DIA., SELF-LOCKING AND NONLOCKING, 160 KSI Ftu Rev 9 | ||||
| AIA/NAS NA0054-2012 | RIVET, SOLID, COUNTERSUNK 100?HEAD, NICKEL-COPPER, METRIC Rev 1 | ||||
| AIA/NAS NASM45595/5-2012 | WASHER, SADDLE, ALUMINUM ALLOY Rev 1 [Superseded: DLA MIL-W-45595/5 CANC NOTICE 1, DLA MIL-W-45595/5] |
若您对上表中数据有任何疑问，请与网站联系。
