行业标准数据检索

IEC TR 60216-5:1990

Guide for the determination of thermal endurance properties of electrical insulating materials. Part 5: Guidelines for the application of thermal endurance characteristics

IEC 60216-5:2003

Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

IEC 62341-1-2:2007

Organic light emitting diode displays - Part 1-2: Terminology and letter symbols

IEC 60664-3:1992

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coatings to achieve insulation coordination of printed board assemblies

IEC PAS 62614:2009

Fibre optics - Launch condition requirements for measuring multimode attenuation

IEC 62320-1:2007/AMD1:2008

Amendment 1 - Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results

IEC 62320-1:2007

Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results

IEC 60839-5-1:1991

Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1: General requirements for systems

IEC 61243-1:1993/COR2:2000

Corrigendum 2 - Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

IEC 60825-1:1993/COR1:1994

Safety of laser products - Part 1: Equipment classification, requirements and user's guide

IEC 60825-2:2000/ISH1:2001

Interpretation Sheet 1 - Safety of laser products - Part 2: Safety of optical fibre communication systems

IEC 60730-2-3:1990

Automatic electrical controls for household and similar use. Part 2: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

IEC 61010-2-010:1992

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material

IEC 61784-5-6:2010

Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6

IEC 60746-3:1985

Expression of performance of electrochemical analyzers. Part 3: Electrolytic conductivity

IEC 60546-2:1987

Controllers with analogue signals for use in industrial-process control systems. Part 2: Guidance for inspection and routine testing

IEC 60364-5-51:1979/AMD1:1982

Amendment 1 - Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

IEC 60364-7-708:1988

Electrical installations of buildings. Part 7: Requirements for special installations or locations. Section 708: Electrical installations in caravan parks and caravans

IEC 60364-5-51:2001

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

IEC 60966-2-5:2003

Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors

IEC 61005:1990

Portable neutron ambient dose equivalent ratemeters for use in radiation protection

IEC 60761-2:1983

Equipment for continuously monitoring radioactivity in gaseous effluents. Part 2: Specific requirements for aerosol effluent monitors

IEC 60254-2:1973

Lead-acid traction batteries - Part 2: Dimensions of traction battery cells

IEC 60840:1988/COR1:1988

Tests for power cables with extruded insulation for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV)

IEC 60885-3:1988

Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables

IEC 60800:1984/COR1:1988

Corrigendum 1 - Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation

IEC 60800:1992

Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation

IEC 60754-1:1982

Test on gases evolved during combustion of electric cables - Part 1: Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables

IEC 60502:1983

Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV

IEC 60724:1984

Guide to the short-circuit temperature limits of electric cables with a rated voltage not exceeding 0.6/1.0 kV

IEC 60502:1983/AMD4:1990

Amendment 4 - Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV

IEC 60502-2:1997/AMD1:1998

Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60245-3:1980

Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

IEC 60092-506:1996

Electrical installations in ships - Part 506: Special features - Ships carrying specific dangerous goods and materials hazardous only in bulk

IEC 62877-1:2016/COR1:2017

Corrigendum 1 - Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte

IEC 61300-2-5:2002

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/Twist

IEC 61300-2-1:1995

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-2:2003/COR1:2004

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability

IEC 61326-2-6:2005

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

IEC 60417-1:2000

Graphical symbols for use on equipment - Part 1: Overview and application

IEC GUIDE 107:1989

Electromagnetic compatibility. Guide to the drafting of electromagnetic compatibility publications

IEC GUIDE 107:1998

Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications

IEC 60364-4-43:2001/COR1:2002

Corrigendum 1 - Electrical installations of buildings - Part 4-43: Protection for safety - Protection against overcurrent

IEC 60364-1:1970

Electrical installations of buildings - Part 1: General and definitions

IEC 61178-1:1993

Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 1: Generic specification

IEC 60141-1:1963/AMD1:1967

Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to 275 kV

CISPR 16-1:1999/AMD1:2002

Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus

IEC TR 62349:2005

Guidance for polarization crosstalk measurement of optical fibre

IEC 61000-4-10:1993/AMD1:2000

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 10: Damped oscillatory magnetic field immunity test. Basic EMC Publication

IEC 60534-3-2:1984

Industrial-process control valves. Part 3: Dimensions - Section Two - Face-to-face dimensions for flangeless control valves except wafer butterfly valves