行业标准数据检索

IEC 60534-2-3:1983

Industrial-process control valves. Part 2: Flow capacity. Section Three: Test procedures

IEC 61511-1:2003

Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements

IEC 60731:1982/AMD1:1987

Amendment 1 - Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy.

IEC 60601-2-45:1998

Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices

IEC 60601-1-2:2007/ISH1:2010

Interpretation sheet 1 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

IEC 60335-2-5:1984

Safety of household and similar electrical appliances - Part 2: Particular requirements for dishwashers

IEC 60335-2-5:1992/AMD1:1999

Amendment 1 - Safety of household and similar electrical appliances - Part 2-5: Particular requirements for dishwashers

IEC 60335-2-5:1992/COR1:1999

Corrigendum 1 - Safety of household and similar electrical appliances - Part 2-5: Particular requirements for dishwashers

IEC 60704-2-13:2000

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods

IEC 60704-2-13:2000+AMD1:2005+AMD2:2008 CSV

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods

IEC 60704-2-10:2004

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these

IEC 61970-453:2008

Energy management system application program interface (EMS-API) - Part 453: CIM based graphics exchange

IEC 61970-301:2009

Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base

IEC 61968-11:2010

Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution

IEC 61968-1:2003

Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general requirements

IEC 61850-10:2005

Communication networks and systems in substations - Part 10: Conformance testing

IEC 61850-5:2003

Communication networks and systems in substations - Part 5: Communication requirements for functions and device models

IEC 60264-3-1:1989

Packaging of winding wires. Part 3: Taper barrelled delivery spools. Section One: Basic dimensions

IEC 60862-2:2002

Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidance on use

IEC 60679-1:1997/AMD2:2003

Amendment 2 - Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification

IEC 61076-2-101:2003/AMD1:2006

Amendment 1 - Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

IEC 60748-22:1992

Semiconductor devices. Integrated circuits - Part 22: Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures.

IEC 61169-1:1992/AMD2:1997

Amendment 2 - Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

IEC 61196-5:2007

Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables

IEC 60189-1:1965/AMD1:1971

Amendment 1 - Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 1: General test and measuring methods

IEC 61500:1996

Nuclear power plants - Instrumentation and control systems important to safety - Functional requirements for multiplexed data transmission

IEC 60717:1981

Method for determination of the space required by capacitors and resistors with unidirectional terminations

IEC 60286-2:1985

Packaging of components for automatic handling. Part 2: Tape packaging of components with unidirectional leads on continuous tapes

IEC 60286-3:1986

Packing of components for automatic handling - Part 3: Packaging of leadless components on continuous tapes

IEC 60286-1:1980

Packaging of components for automatic handling. Part 1: Tape packaging of components with axial leads on continuous tapes

IEC 60570:1995/AMD1:1998

Amendment 1 - Electrical supply track systems for luminaires

IEC 60929:1990/COR1:1991

Corrigendum 1 - A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

IEC 60927:1988/AMD1:1990

Amendment 1 - Starting devices (other than glow starters). Performance requirements.

IEC 60662:1980/AMD5:1993

Amendment 5 - High-pressure sodium vapour lamps

IEC 60282-1:1974/AMD3:1980

Amendment 3 - High voltage fuses - Part 1: Current-limiting fuses

IEC 60092-306:1980

Electrical installations in ships. Part 306: Equipment - Luminaires and accessories

IEC 61086-3-1:1995

Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II)

IEC 60819-1:1995

Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements

IEC 60464-3-1:1986

Specification for insulating varnishes containing solvent. Part 3: Specifications for individual materials. Sheet 1: Requirements for cold curing finishing varnishes

IEC 61378-3:2006

Converter transformers - Part 3: Application guide

IEC 60073:1991

Coding of indicating devices and actuators by colours and supplementary means.

IEC 60072-2:1967

Dimensions and output ratings of electrical machines - Part 2: Dimensions of mounting flanges

IEC 60072-1:1967

Dimensions and output ratings of electrical machines - Part 1: Foot-mounted electrical machines with shaft heights between 56 and 315 mm (2 ⅝ and 12 ½ in)

IEC 60034-18-1:1992/AMD1:1996

Amendment 1 - Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 1: General guidelines

IEC 60335-1:1976/ISH1:1976

Interpretation sheet I-SH 01

IEC 60335-1:1976/AMD1:1977

Amendment 1 - Safety of household and similar electrical appliances - Part 1: General requirements (second edition) *Note. - Second impression (1983) incorporates Amendments No. 1 (1977), 2 (1979) and 3 (1982)

IEC 60335-1:1991

Safety of household and similar electrical appliances - Part 1: General requirements (Third edition)

IEC 60335-1:1991/ISH1:1993

Interpretation Sheet 1 - Safety of household and similar electrical appliances - Part 1: General requirements

IEC 60335-1:2001+AMD1:2004 CSV

Household and similar electrical appliances - Safety - Part 1: General requirements

ISO/IEC 29642:2007

Information technology -- Data interchange on 120 mm and 80 mm optical disk using +RW DL format -- Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4x)