（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 61000-6-7:2014 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations | ||||
| IEC 60825-4:2006/AMD1:2008 | Amendment 1 - Safety of laser products - Part 4: Laser guards | ||||
| IEC TR 61000-4-1:2016 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series | ||||
| IEC 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | ||||
| IEC 60909-0:2016 | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents | ||||
| IEC 60749-44:2016 | Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices | ||||
| IEC 60749-38:2008 | Semiconductor devices - Mechanical and climatic test methods - Part 38: Soft error test method for semiconductor devices with memory | ||||
| IEC 60749-35:2006 | Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components | ||||
| IEC 60749-32:2002 | Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) | ||||
| IEC 60749-32:2002+AMD1:2010 CSV | Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) | ||||
| IEC 60749-31:2002 | Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced) | ||||
| IEC 60749-28:2017 | Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level | ||||
| IEC 60749-27:2006 | Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) | ||||
| IEC 60749-25:2003 | Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling | ||||
| IEC 61171:1992 | Radiation protection instrumentation - Monitoring equipment - Atmospheric radioactive iodines in the environment | ||||
| IEC 60432-1:1999+AMD1:2005 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | ||||
| IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | ||||
| IEC 60064:1993/AMD2:2002 | Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements | ||||
| IEC 60951-3:2009 | Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 3: Equipment for continuous high range area gamma monitoring | ||||
| IEC 60115-5-1:1983 | Fixed resistors for use in electronic equipment. Part 5: Blank detail specification: Fixed precision resistors. Assessment level E | ||||
| IEC 60677:1980 | Block transfers in CAMAC systems | ||||
| IEC 62271-200:2011/COR1:2015 | Corrigendum 1 - High-voltage swithgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | ||||
| IEC 60060:2011 SER | High-voltage test techniques - ALL PARTS | ||||
| IEC 62271-102:2001/AMD2:2013 | Amendment 2 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | ||||
| IEC 61869-5:2011 | Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers | ||||
| IEC 61212-1:2006/COR1:2014 | Corrigendum 1 - Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | ||||
| IEC 61068-1:1991 | Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements | ||||
| IEC 61067-3-1:1995 | Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes | ||||
| IEC 61067-1:1991 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements | ||||
| IEC 61061-3-2:2001 | Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Rings produced from beech veneer | ||||
| IEC 61034-2:2005/COR1:2006 | Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements | ||||
| IEC 60893-3-4:2003 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins | ||||
| IEC 60893-3-4:2003/COR1:2014 | Corrigendum 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins | ||||
| IEC 60893-3-4:2003/AMD1:2012 | Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins | ||||
| IEC 60893-3-4:2003+AMD1:2012 CSV | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins | ||||
| CISPR 20:2002/AMD1:2002 | Amendment 1 - Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | ||||
| CISPR 24:1997/AMD1:2001 | Amendment 1 - Information technology equipment - Immunity characteristics - Limits and methods of measurement | ||||
| CISPR 20:2002+AMD1:2002+AMD2:2004 CSV | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | ||||
| CISPR 15:1975 | Limits and methods of measurement of radio interference characteristics of fluorescent lamps and luminaires | ||||
| CISPR 15:1992/COR1:1992 | Corrigendum 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. | ||||
| CISPR 15:1996 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ||||
| CISPR 15:1996/AMD1:1997 | Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ||||
| CISPR 15:2005/AMD1:2006 | Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ||||
| IEC 61000-6-4:1997 | Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments | ||||
| CISPR 11:2003+AMD1:2004 CSV | Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement | ||||
| CISPR 18-3:1986/AMD1:1996 | Amendment 1 - Radio interference characteristics of overhead power lines and high-voltage equipment. Part 3: Code of practice for minimizing the generation of radio noise | ||||
| CISPR 11:2003/AMD2:2006 | Amendment 2 - Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement | ||||
| CISPR 18-1:1982 | Radio interference characteristics of overhead power lines and high-voltage equipment. Part 1: Description of phenomena | ||||
| CISPR 11:2009+AMD1:2010 CSV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ||||
| CISPR 11:1990/AMD2:1996/COR1:1996 | Corrigendum 1 to amendment 2 - Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment |
若您对上表中数据有任何疑问，请与网站联系。
