（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/FDIS 11295 | Classification and information on design and applications of plastics piping systems used for renovation and replacement | ||||
| ISO 3304:1985 | Plain end seamless precision steel tubes -- Technical conditions for delivery | ||||
| ISO 2505-2:1994 | Thermoplastics pipes -- Longitudinal reversion -- Part 2: Determination parameters | ||||
| ISO 3306:1985 | Plain end as-welded and sized precision steel tubes -- Technical conditions for delivery | ||||
| ISO/TR 3311:1974 | Withdrawal of ISO/TR 3311-1975 | ||||
| ISO 3545-1:1989 | Steel tubes and fittings -- Symbols for use in specifications -- Part 1: Tubes and tubular accessories with circular cross-section | ||||
| ISO 6761:1981 | Steel tubes -- Preparation of ends of tubes and fittings for welding | ||||
| ISO/FDIS 8179-1 | Ductile iron pipes, fittings, accessories and valves -- External zinc-based coatings -- Part 1: Metallic zinc-based coatings with finishing layer | ||||
| ISO 8179-1:2004 | Ductile iron pipes -- External zinc-based coating -- Part 1: Metallic zinc with finishing layer | ||||
| ISO 9329-2:1997 | Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties | ||||
| ISO 9330-5:2000 | Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties | ||||
| ISO 9330-4:2000 | Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties | ||||
| ISO 9330-6:1997 | Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes | ||||
| ISO 16132:2004 | Ductile iron pipes and fittings -- Seal coats for cement mortar linings | ||||
| ISO 2937:1974 | Plain end seamless steel tubes for mechanical application | ||||
| ISO 10799-2:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels -- Part 2: Dimensions and sectional properties | ||||
| ISO 3545-3:1989 | Steel tubes and fittings -- Symbols for use in specifications -- Part 3: Tubular fittings with circular cross-section | ||||
| ISO 5251:1981 | Stainless steel butt-welding fittings | ||||
| ISO 161-2:1977 | Thermoplastic pipes for the transport of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch series | ||||
| ISO/R 1166:1970 | Withdrawal of ISO/R 1166-1970 | ||||
| ISO 1746:1998 | Rubber or plastics hoses and tubing -- Bending tests | ||||
| ISO 10791-9:2001 | Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change | ||||
| ISO 2507-1:1995 | Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method | ||||
| ISO 2507-2:1995 | Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes | ||||
| ISO 3126:1974 | Plastics pipes -- Measurement of dimensions | ||||
| ISO 3478:1975 | Polypropylene (PP) pipes -- Determination of longitudinal reversion | ||||
| ISO 3514:1976 | Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density | ||||
| ISO 4065:1996 | Thermoplastics pipes -- Universal wall thickness table | ||||
| ISO 4065:1978 | Thermoplastic pipes -- Universal wall thickness table | ||||
| ISO/DIS 4065 | Thermoplastics pipes -- Universal wall thickness table | ||||
| ISO 4440-1:1994 | Thermoplastics pipes and fittings -- Determination of melt mass-flow rate -- Part 1: Test method | ||||
| ISO 7510:1997 | Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method | ||||
| ISO 7685:1998 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness | ||||
| ISO 8483:2003 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints | ||||
| ISO 8513:2014 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength | ||||
| ISO 8533:2003 | Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints | ||||
| ISO/CD 8533 | Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints | ||||
| ISO 8521:2009 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength | ||||
| ISO 9854-1:1994 | Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method | ||||
| ISO 9852:2007 | Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method | ||||
| ISO 10468:2003 | Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor | ||||
| ISO 10928:2009 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use | ||||
| ISO 10952:2008 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | ||||
| ISO/TS 11619:2014 | Polyurethane tubing for use primarily in pneumatic installations -- Dimensions and specification | ||||
| ISO 11420:1996 | Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds | ||||
| ISO 12230:2012 | Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength | ||||
| ISO 13950:2007 | Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints | ||||
| ISO 17778:2015 | Plastics piping systems -- Fittings, valves and ancillaries -- Determination of gaseous flow rate/pressure drop relationships | ||||
| ISO 18851:2015 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the structural design of fittings | ||||
| ISO 1179-1:2007 | Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports |
若您对上表中数据有任何疑问，请与网站联系。
