（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 19893:2011 | Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling | ||||
| ISO/CD 19966 | Polyethylene (PE) pipes and fittings — Determination of the resistance to crack initiation and slow crack growth on notched cylindrical bars under constant load (NCBT) | ||||
| ISO 21751:2011 | Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test | ||||
| ISO/TS 26873:2010 | Plastics pipes and fittings -- Definition and construction procedures for reference lines | ||||
| ISO 24033:2009 | Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength | ||||
| ISO 727-1:2002 | Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series | ||||
| ISO 580:1990 | Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings -- Oven test -- Test method and basic specifications | ||||
| ISO 3949:1980 | Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type | ||||
| ISO 727-2:2005 | Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series | ||||
| ISO 3604:1976 | Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness under conditions of external hydraulic pressure | ||||
| ISO 9625:1993 | Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes | ||||
| ISO 7279:1984 | Polypropylene (PP) fittings for pipes under pressure -- Sockets for fusion using heated tools -- Metric series -- Dimensions of sockets | ||||
| ISO 13967:2009 | Thermoplastics fittings -- Determination of ring stiffness | ||||
| ISO 160:1980 | Asbestos-cement pressure pipes and joints | ||||
| ISO 2785:1986 | Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure | ||||
| ISO 3503:2015 | Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure of assemblies subjected to bending | ||||
| ISO 11413:1996 | Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting | ||||
| ISO 13783:1997 | Plastics piping systems -- Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints -- Test method for leaktightness and strength while subjected to bending and internal pressure | ||||
| ISO 19879:2005 | Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections | ||||
| ISO/NP 19879 | Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections | ||||
| ISO 19879:2010 | Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections | ||||
| ISO 1307:1992 | Rubber and plastics hoses for general-purpose industrial applications -- Bore diameters and tolerances, and tolerances on length | ||||
| ISO 1307:2006 | Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses | ||||
| ISO 3994:2014 | Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification | ||||
| ISO 4023:2009 | Rubber hoses and hose assemblies for steam -- Test methods | ||||
| ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge -- Specification | ||||
| ISO 4671:2007/Amd 1:2011 | Clarification of position at which outside diameter is measured | ||||
| ISO 4672:1997 | Rubber and plastics hoses -- Sub-ambient temperature flexibility tests | ||||
| ISO 7233:2006 | Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum | ||||
| ISO 10497:2004 | Testing of valves -- Fire type-testing requirements | ||||
| ISO 8029:2007 | Plastics hose -- General-purpose collapsible water hose, textile-reinforced -- Specification | ||||
| ISO 8033:1991 | Rubber and plastics hose -- Determination of adhesion between components | ||||
| ISO 8308:1993 | Rubber and plastics hoses and tubing -- Determination of transmission of liquids through hose and tubing walls | ||||
| ISO 8447:1986 | Pipework -- Single overlap flexible metal hoses (rubber packing, limited tightness, circular or polygonal section, in protected carbon steel) | ||||
| ISO 10380:1994 | Corrugated flexible metallic hose and hose assemblies | ||||
| ISO/DIS 10619-1 | Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature | ||||
| ISO 10380:2012 | Pipework -- Corrugated metal hoses and hose assemblies | ||||
| ISO 7121:2006 | Steel ball valves for general-purpose industrial applications | ||||
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies -- Guide for use by purchasers, assemblers, installers and operating personnel | ||||
| ISO 5208:1993 | Industrial valves -- Pressure testing of valves | ||||
| ISO 5210:1991 | Industrial valves -- Multi-turn valve actuator attachments | ||||
| ISO 8659:1989 | Thermoplastics valves -- Fatigue strength -- Test method | ||||
| ISO 4665-3:1987 | Rubber, vulcanized -- Resistance to weathering -- Part 3: Methods of exposure to artificial light | ||||
| ISO 10497:2010 | Testing of valves -- Fire type-testing requirements | ||||
| ISO 19240:2017 | Industrial valves -- Lined metal quarter turn and check valves for chemical process and related industries | ||||
| ISO 4079:1991 | Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification | ||||
| ISO 16137:2006 | Industrial valves -- Check valves of thermoplastics materials | ||||
| ISO 6358-3:2014 | Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 3: Method for calculating steady-state flow-rate characteristics of systems | ||||
| ISO/TR 16194:2017 | Pneumatic fluid power -- Assessment of component reliability by accelerated life testing -- General guidelines and procedures | ||||
| ISO 9110-1:1990 | Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles |
若您对上表中数据有任何疑问，请与网站联系。
