（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/TR 10686:2013 | Hydraulic fluid power -- Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system | ||||
| ISO 6099:2009 | Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types | ||||
| ISO 19973-3:2015 | Pneumatic fluid power -- Assessment of component reliability by testing -- Part 3: Cylinders with piston rod | ||||
| ISO 3321:1975 | Fluid power systems and components -- Cylinder bores and piston rod diameters -- Inch series | ||||
| ISO 4395:2009 | Fluid power systems and components -- Cylinder piston rod end types and dimensions | ||||
| ISO 6020-1:1998 | Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 1: Medium series | ||||
| ISO 6020-2:1991 | Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 2: Compact series | ||||
| ISO 6020-1:2007 | Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 1: Medium series | ||||
| ISO 8136:1986 | Hydraulic fluid power -- Single rod cylinders, 160 bar (16 MPa) medium series -- Port dimensions | ||||
| ISO 8137:1986 | Hydraulic fluid power -- Single rod cylinders, 250 bar (25 MPa) series -- Port dimensions | ||||
| ISO 8140:1986 | Pneumatic fluid power -- Cylinders, 10 bar (1 000 kPa) series -- Rod end clevis -- Mounting dimensions | ||||
| ISO 8139:2009 | Pneumatic fluid power -- Cylinders, 1 000 kPa (10 bar) series -- Mounting dimensions of rod-end spherical eyes | ||||
| ISO 8140:2009 | Pneumatic fluid power -- Cylinders, 1 000 kPa (10 bar) series -- Mounting dimensions of rod-end clevises | ||||
| ISO 10100:1990 | Hydraulic fluid power -- Cylinders -- Acceptance test | ||||
| ISO 10762:2015 | Hydraulic fluid power -- Mounting dimensions for cylinders, 10 MPa (100 bar) series | ||||
| ISO 10766:2006 | Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods | ||||
| ISO 10766:2014 | Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods | ||||
| ISO 16656:2016 | Hydraulic fluid power -- Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) -- Mounting dimensions | ||||
| ISO 15552:2004 | Pneumatic fluid power -- Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm -- Basic, mounting and accessories dimensions | ||||
| ISO 1179-1:2013 | Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports | ||||
| ISO 1179-2:2013 | Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) | ||||
| ISO 4079-2:2005 | Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types -- Specification -- Part 2: Water-based fluid applications | ||||
| ISO 4397:1993 | Fluid power systems and components -- Connectors and associated components -- Nominal outside diameters of tubes and nominal inside diameters of hoses | ||||
| ISO 6149-2:1993 | Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 2: Heavy-duty (S series) stud ends -- Dimensions, design, test methods and requirements | ||||
| ISO/DIS 6164 | Hydraulic fluid power -- Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 10 to 80 | ||||
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use -- Part 1: 24 degree cone connectors | ||||
| ISO 10791-1:1998 | Test conditions for machining centres -- Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis) | ||||
| ISO 8434-3:1995 | Metallic tube connections for fluid power and general use -- Part 3: O-ring face seal fittings | ||||
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use -- Part 6: 60 degree cone connectors with or without O-ring | ||||
| ISO 9974-4:2006 | Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs | ||||
| ISO 4401:1994 | Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces | ||||
| ISO 5599-1:1989 | Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector | ||||
| ISO 10791-7:2014/DAmd 1 | |||||
| ISO 5599-2:1990 | Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector | ||||
| ISO 5599-3:1990 | Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions | ||||
| ISO 6263:1987 | Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces | ||||
| ISO 6263:2013 | Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces | ||||
| ISO 6403:1988 | Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods | ||||
| ISO 6953-1:2000 | Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements | ||||
| ISO 7368:1989 | Hydraulic fluid power -- Two-port slip-in cartridge valves -- Cavities | ||||
| ISO 3722:1976 | Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods | ||||
| ISO 6301-1:2009 | Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements | ||||
| ISO 16873:2011 | Hydraulic fluid power -- Pressure switches -- Mounting surfaces | ||||
| ISO/TR 10771-2:2008 | Hydraulic fluid power -- Fatigue pressure testing of metal pressure-containing envelopes -- Part 2: Rating methods | ||||
| ISO 10771-1:2002 | Hydraulic fluid power -- Fatigue pressure testing of metal pressure-containing envelopes -- Part 1: Test method | ||||
| ISO 10946:1999 | Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports | ||||
| ISO/CD 2942 | Hydraulic fluid power -- Filter elements -- Verification of fabrication integrity and determination of the first bubble point | ||||
| ISO 3601-2:2016 | Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications | ||||
| ISO 3601-1:2008/Cor 2:2009 | |||||
| ISO 5782-1:1997 | Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements |
若您对上表中数据有任何疑问，请与网站联系。
