（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 29262:2011 | Production equipment for microsystems -- Interface between end effector and handling system | ||||
| ISO 2769:1973 | Modular units for machine tool construction -- Wing bases for slide units | ||||
| ISO 2934:1973 | Modular units for machine tool construction -- Wing base for columns | ||||
| ISO 3610:1976 | Modular units for machine tool construction -- Support brackets | ||||
| ISO 8526-1:1990 | Modular units for machine tools -- Workholding pallets -- Part 1: Workholding pallets up to 800 mm nominal size | ||||
| ISO 3970:1977 | Modular units for machine tool construction -- Integral way columns -- Floor-mounted type | ||||
| ISO 238:1974 | Reduction sleeves and extension sockets for tools with Morse taper shanks | ||||
| ISO 296:1974 | Machine tools -- Self-holding tapers for tool shanks | ||||
| ISO 7026:1990 | Road vehicles -- Screw-in injection nozzle holders, types 20, 21 and 27 for pintle nozzle size "S", type "B" | ||||
| ISO 702-3:1975 | Machine tools -- Spindle noses and face plates -- Sizes for interchangeability -- Part 3: Bayonet type | ||||
| ISO 839-1:1976 | Milling machine arbors with 7/24 tapers -- Part 1: Dimensions | ||||
| ISO 702-4:2004 | Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 4: Cylindrical connection | ||||
| ISO 1080:1975 | Machine tools -- Morse taper shanks -- Cotter slots with taper keys | ||||
| ISO 3936:1993 | Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions | ||||
| ISO 7388-1:1983/Add 1:1984 | Conicity tolerances | ||||
| ISO 7388-1:1983 | Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Shanks Nos. 40, 45 and 50 -- Dimensions | ||||
| ISO 10889-1:1997 | Tool holders with cylindrical shank -- Part 1: Cylindrical shank, location bore -- Technical delivery conditions | ||||
| ISO 10889-4:1997 | Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat | ||||
| ISO 10897:1996 | Collets for tool holders with taper ratio 1:10 -- Collets, hoders,nuts | ||||
| ISO 10889-7:2016 | Tool holders with cylindrical shank -- Part 7: Type F with taper seat | ||||
| ISO 12164-3:2008 | Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools | ||||
| ISO 15877-3:2009/Amd 1:2010 | |||||
| ISO 3408-3:1992 | Ball screws -- Part 3: Acceptance conditions and acceptance tests | ||||
| ISO 229:1973 | Machine tools -- Speeds and feeds | ||||
| ISO/R 230:1961 | Machine tool test code | ||||
| ISO/TR 230-8:2010 | Test code for machine tools -- Part 8: Vibrations | ||||
| ISO/DTR 230-11 | Test code for machine tools -- Part 11: Measuring instruments suitable for machine tool geometry tests | ||||
| ISO 7026:1997 | Diesel engines -- Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" | ||||
| ISO 1249:1974 | Zinc chromate pigments -- Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments | ||||
| ISO 230-10:2016 | Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools | ||||
| ISO 447:1984 | Machine tools -- Direction of operation of controls | ||||
| ISO/PRF 14955-1 | Machine tools -- Environmental evaluation of machine tools -- Part 1: Design methodology for energy-efficient machine tools | ||||
| ISO/DIS 14955-2 | Machine tools - Environmental evaluation of machine tools -- Part 2: Methods for measuring energy supplied to machine tools and machine tool components | ||||
| ISO/IEC 9075-4:2008/Cor 1:2010 | |||||
| ISO/DIS 14955-4 | Machine tools -- Environmental evaluation of machine tools -- Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency | ||||
| ISO 23125:2015 | Machine tools -- Safety -- Turning machines | ||||
| ISO/TR 17243-1:2014 | Machine tool spindles -- Evaluation of machine tool spindle vibrations by measurements on spindle housing -- Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1 | ||||
| ISO 10601:2007 | Micaceous iron oxide pigments for paints -- Specifications and test methods | ||||
| ISO 16093:2017 | Machine tools -- Safety -- Sawing machines for cold metal | ||||
| ISO/TR 17243-2 | Machine tool spindles -- Evaluation of spindle vibrations by measurements on non-rotating parts -- Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min | ||||
| ISO/TR 17529:2014 | Machine tools -- Practical guidance and example of risk assessment on electro-discharge machines | ||||
| ISO 23125:2010 | Machine tools -- Safety -- Turning machines | ||||
| ISO/IEC ISP 12062-4:1995/Cor 1:1996 | |||||
| ISO 28881:2013 | Machine tools -- Safety -- Electro-discharge machines | ||||
| ISO 3655-0:1976 | Test conditions for vertical turning and boring lathes with one or two columns -- Testing of the accuracy -- Part 0: General introduction | ||||
| ISO 3655:1986 | Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table -- General introduction and testing of the accuracy | ||||
| ISO 6155:1998 | Machine tools -- Test conditions for horizontal spindle turret and single spindle automatic lathes -- Testing of the accuracy | ||||
| ISO 6155-2:1986 | Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes -- Testing of the accuracy -- Part 2: Machinable bar diameters 25 mm or less and chuck diameter up to 160 mm | ||||
| ISO 8956:1986 | Acceptance conditions for copying attachments, integral or otherwise, for lathes -- Testing of the accuracy | ||||
| ISO/TS 8000-1:2011 | Data quality -- Part 1: Overview |
若您对上表中数据有任何疑问，请与网站联系。
