行业标准数据检索

ISO 12985-2:2000

Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 2: Determination of apparent density and of open porosity using a hydrostatic method

ISO 12986-1:2000

Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 1: Determination of bending/shear strength by a three-point method

ISO 12986-2:2005

Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 2: Determination of flexural strength by the four-point method

ISO 12986-2:2014

Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 2: Determination of flexural strength by the four-point method

ISO 12986-2:2009

Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 2: Determination of flexural strength by the four-point method

ISO 14427:2004

Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of unbaked test specimens and determination of apparent density after compaction

ISO/TS 14425:1999

Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of volatile-matter content of unbaked pastes

ISO 15379-2:2004

Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 2: Determination of the expansion due to sodium penetration without application of pressure

ISO 15379-2:2015

Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 2: Determination of the expansion due to sodium penetration without application of pressure

ISO 18515:2007

Carbonaceous materials for the production of aluminium -- Cathode blocks and baked anodes -- Determination of compressive strength

ISO 18843:2015

Aluminium oxide primarily used for the production of aluminium -- Method for the determination of flow time

ISO/TR 210:1999

Essential oils -- General rules for packaging, conditioning and storage

ISO/TR 211:1999

Essential oils -- General rules for labelling and marking of containers

ISO 279:1998

Essential oils -- Determination of relative density at 20 degrees C -- Reference method

ISO 279:1981

Essential oils -- Determination of relative density at 20 degrees C (Reference method)

ISO 280:1998

Essential oils -- Determination of refractive index

ISO/R 1342:1971

Oil of rosemary

ISO 3044:1997

Oil of eucalyptus citriodora Hook.

ISO 3142:1997

Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]

ISO 3216:1997

Oil of cassia, Chinese type (Cinnamomum aromaticum Nees, syn. Cinnamomum cassia Nees ex Blume)

ISO 3519:1976

Oil of lime, obtained by distillation

ISO 20299-2

Film for wrapping rubber bales -- Part 2: Natural rubber

ISO 1125:1990

Rubber compounding ingredients -- Carbon black -- Determination of ash content

ISO 1124:1983

Rubber compounding ingredients -- Carbon black -- Sampling shipments in bulk or in bins

ISO 8511:1987

Rubber compounding ingredients -- Carbon black -- Determination of pellet size distribution

ISO/WD 3087

Iron ores -- Determination of the moisture content of a lot

ISO 4695:1995

Iron ores -- Determination of reducibility

ISO 15156-1:2001/Cor 1:2005

ISO 4940:1985

Steel and cast iron -- Determination of nickel content -- Flame atomic absorption spectrometric method

ISO 3575:1976

Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities

ISO 15177:2012

Hot-rolled twin-roll cast carbon steel sheet of commercial quality

ISO 10545-1:1995

Ceramic tiles -- Part 1: Sampling and basis for acceptance

ISO 17860:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of drying loss of ceramic granules

ISO/R 600:1967

Withdrawal of ISO/R 600-1967

ISO 14649-11:2003

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 11: Process data for milling

ISO 14649-13:2013

Automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 13: Process data for wire electrical discharge machining (wire-EDM)

ISO 1622:1975

Plastics -- Polystyrene moulding and extrusion materials -- Designation

ISO 14649-12:2005

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 12: Process data for turning

ISO 18646-1:2016

Robotics -- Performance criteria and related test methods for service robots -- Part 1: Locomotion for wheeled robots

ISO 14649-14:2013

Automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 14: Process data for sink electrical discharge machining (sink-EDM)

ISO 2897:1976

Plastics -- Designation of impact-resistant polystyrenes

ISO/TS 14649-201:2011

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 201: Machine tool data for cutting processes

ISO 9283:1990/Amd 1:1991

Guide for selection of performance criteria for typical applications

ISO 9409-1:2004

Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates

ISO 9283:1990

Manipulating industrial robots -- Performance criteria and related test methods

ISO 9409-1:1988

Manipulating industrial robots -- Mechanical interfaces -- Part 1: Circular (form A)

ISO 9409-2:1996

Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts (form A)

ISO 9283:1998

Manipulating industrial robots -- Performance criteria and related test methods

ISO 2727:1973

Modular units for machine tool construction -- Headstocks

ISO 2562:1973/Amd 1:1982