（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| DB51/T2047-2015 | 微结构光学模辊 | 2015-09-25 | 2015-10-01 | ||
| DB51/T2048-2015 | 液晶显示器增亮光学膜片 | 2015-09-25 | 2015-10-01 | ||
| 2015发字第5号(总第45号) | 关于批准《旅行社标准化工作指南》等41项地方标准目录 | 2015-09-25 | 2015-09-25 | ||
| EN 15440:2011 | Solid recovered fuels - Methods for the determination of biomass content | 2011-03-09 | |||
| CEN/TS 15440:2006 | Solid recovered fuels - Method for the determination of biomass content | 2006-11-29 | |||
| CEN/TS 15747:2008 | Solid recovered fuels - 14C-based methods for the determination of the biomass content | 2008-10-29 | |||
| AIA/NAS NASM 8831-2003 Revision 3 | Fasteners, Alloy Steel, 450 Degree F Externally Threaded, 180 Ksi Ftu, 108 Ksi Fsu, Fatigue Rated | 2003-10-21 | |||
| CEN/TR 15642:2008 | Unified tests procedures for the tests of EN 3-7 | 2008-01-23 | |||
| AIA/NAS NASM 21054-2012 Revision 1 | Nut, Self-Locking, Plate, One Lug, 100 Degrees Csk, Low Height, Cres, 125 Ksi Ftu, 450 Degrees F & 800 Degrees F | 2012-04-27 | |||
| EN 1520:2002 | Prefabricated reinforced components of lightweight aggregate concrete with open structure | 2002-11-20 | |||
| AIA/NAS NASM 21054-1999 | Nut, Self-locking, Plate, One Lug, 100 Degree Csk, Low Height, Cres, 125 Ksi Ftu, 450 Degree And 800 Degree F | 1999-06-21 | |||
| EN 1520:2002/AC:2003 | Prefabricated reinforced components of lightweight aggregate concrete with open structure | 2003-05-07 | |||
| AIA/NAS NASM 21097-1999 | Bolt, Self-locking, 250 Degree F, Cres, 48 Ksi Fsu, 80 Ksi Ftu, Pan Head, Cross Recessed | 1999-09-01 | |||
| EN 3-9:2006/AC:2007 | Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers | 2007-10-17 | |||
| 长春市人民代表大会常务委员会公告[十四届]第二十六号 | 长春市轨道交通管理条例 | 2015-06-11 | 2015-07-01 | ||
| EN ISO 544:2003 | Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings (ISO 544:2003) | 2003-11-15 | |||
| EN 759:1997 | Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and marking | 1997-06-18 | |||
| EN 20544:1991 | Filler materials for manual welding - Size requirements (ISO 544:1989) | 1991-11-06 | |||
| AIA/NAS NASM 21143-1999 | Pin, Straight, Headless (dowel), General Specification For | 1999-09-01 | |||
| AIA/NAS NASM 21392-1999（R2000） | Nut, Plain, Hexagon-azimuth (with Lockwire Holes) | 1999-12-01 | |||
| EN 15776:2011+A1:2015 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % | 2015-10-21 | |||
| AIA/NAS NASM 25440-1999 | Washers, For Use With Aircraft Aluminium Terminals | 1999-09-01 | |||
| CEN/TS 15185:2005 | Furniture - Assessment of the surface resistance to abrasion | 2005-11-16 | |||
| AIA/NAS NASM 27975-2005 Revision 1 | Clevis, Rod End-adjusting, Wide And Narrow Forks | 2005-10-01 | |||
| EN 15975-1:2011+A1:2015 | Security of drinking water supply - Guidelines for risk and crisis management - Part 1: Crisis management | 2015-11-25 | |||
| JB/T12564-2015(2017年复审) | 螺杆活塞串联压缩机组 | 2015-10-10 | 2016-03-01 | ||
| SAE J 1939/75-2007 | Application Layer - Generator Sets and Industrial | 2007-06-21 | |||
| 浙人大常(2015)18号 | 关于批准《宁波市城市房屋使用安全管理条例》的决定 | 2015-07-30 | 2016-01-01 | ||
| SAE J 1939/75-2006 | Application Layer - Generator Sets and Industrial | 2006-07-10 | |||
| SAE J 1939/75-2002 | Application Layer - Generator Sets and Industrial | 2002-12-19 | |||
| LB/T 042-2015 | 国家温泉旅游名镇 | 2015-07-27 | 2015-11-01 | ||
| EN 40-2:1976 | Lighting columns - Part 2: Dimensions and tolerances | 1976-06-30 | 2004-10-06 | ||
| SAE AS 81044-2004 | Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, Or Polyarlyene Insulated, Copper Or Copper Alloy | 2004-06-21 | |||
| EN 1811:1998+A1:2008 | Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin | 2008-04-02 | |||
| EN 81-71:2005+A1:2006 | Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts | 2006-12-13 | |||
| EN 23661:1993 | End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977) | 1993-07-31 | |||
| SAE AS 81714/1-2004 | Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 22, Series I | 2004-11-03 | |||
| EN ISO 8676:2000 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999) | 2000-11-22 | |||
| EN 28676:1991 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1988) | 1991-10-16 | |||
| SAE J 1618-2000 | Continuously Variable Transmission Test Code For Passenger Cars | 2000-04-12 | |||
| 山东省非物质文化遗产条例 | 2015-09-24 | 2015-12-01 | |||
| LB/T 043-2015 | 高尔夫管理服务规范 | 2015-07-27 | 2015-11-01 | ||
| AIA/NAS NASM 51850-1999 | Screw, Tapping-thread Formimg, Type Ab, Hexagon Head, Slotted | 1999-11-01 | |||
| SAE AS 81820/1D-2014 | BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 °F | 2014-07-21 | |||
| SAE AS 81820/1B-2007 | Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, -65° to 325°F | 2007-10-31 | |||
| EN 88-1:2011 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | 2011-04-06 | |||
| EN ISO 4014:2000 | Hexagon head bolts - Product grades A and B (ISO 4014:1999) | 2000-11-22 | |||
| SAE AS 81820/1A-2003 | Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, -65° to 325°F | 2003-08-11 | |||
| EN 24014:1991 | Hexagon head bolts - Product grades A and B (ISO 4014:1988) | 1991-10-16 | |||
| SAE AS 81820/1-1998 | Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, -65° to 325°F | 1998-04-01 |
若您对上表中数据有任何疑问，请与网站联系。
