（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 40-4:1982 | Lighting columns - Part 4: Surface protection of metal lighting columns | 1983-02-21 | 2005-12-07 | ||
| SAE J 947-2003 | Glossary of Fiberboard Terminology | 2003-09-25 | |||
| SAE J 947-1985 | Glossary of Fiberboard Terminology | 1985-01-01 | |||
| AIA/NAS NASM 63540/3-2000 | Stud, Self-clinching, Flush Head, Hex Clinch Type | 2000-03-31 | |||
| SAE J 947-1980 | Glossary of Fiberboard Terminology | 1980-07-01 | |||
| EN 40-4:2005/AC:2006 | Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns | 2006-09-20 | |||
| EN ISO 7263:2008 | Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2008) | 2008-12-15 | |||
| EN ISO 7263:1995 | Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994) | 1995-02-10 | |||
| SAE AS 4695C-2013 | Sleeve, Tube End, Acorn to Weld, Short Flareless | 2013-10-20 | |||
| AIA/NAS NASM 35791-1999 | Handle, Bail-chest, Surface Mounting Countersunk Holes | 1999-09-01 | |||
| EN 13566-4:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes | 2002-12-18 | |||
| EN 378-4:2008+A1:2012 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery | 2012-05-23 | |||
| SAE AS 4695A-2004 | Sleeve, Tube End, Acorn to Weld, Short Flareless | 2004-07-08 | |||
| EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks - Part 1: General | 2004-09-29 | |||
| SAE AS 4695-1992 | Sleeve, Tube End, Acorn to Weld, Short Flareless | 1992-04-01 | |||
| EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes | 2004-09-29 | |||
| EN 474-2:2006+A1:2008 | Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers | 2008-10-01 | |||
| AIA/NAS NASM 45595/5-2000 | Washer, Saddle, Aluminum Alloy | 2000-03-31 | |||
| SAE J 1469-2006 | Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers | 2006-06-05 | |||
| SAE J 1469-2001 | Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers | 2001-07-03 | |||
| SAE J 1469-1995 | Air Brake Actuator Test Procedure, Truck-Tractor, Bus and Trailer | 1995-08-01 | |||
| SAE J 1469-1988 | Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers | 1988-06-01 | |||
| AIA/NAS NASM 45938-1999 | Nut, Plain, Clinch And Nut, Self-locking, Clinch General Specification For | 1999-11-01 | |||
| EN 474-4:2006+A2:2012 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders | 2012-01-11 | |||
| 长政办发〔2015〕35号 | 长沙市城镇土地使用税征收范围与地段等级税额标准规定 | 2015-09-18 | 2015-09-18 | ||
| AIA/NAS NASM 85643/4-1998 | Bit, Screwdriver, Ribbed, Offset Cruciform, Long Shank External Hexagon Shank | 1998-06-30 | |||
| EN 15159-3:2006 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance | 2006-07-12 | |||
| SAE J 1911-2014 | Test Procedure for Air Reservoir Capacity - Truck and Bus | 2014-02-05 | |||
| EN 474-6:2006+A1:2009 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers | 2009-02-11 | |||
| 浙人大常(2015)16号 | 关于批准《杭州市公路条例》的决定 | 2015-07-30 | 2015-11-01 | ||
| AIA/NAS NASM 85730/1-1999 | Nut, Captive Washer, Self-locking, Nickel Alloy 718, 220 Ksi Ftu, 900 Degree (12-spline) Wrenching Element | 1999-12-01 | |||
| SAE J 1911-2003 | Test Procedure for Air Reservoir Capacity--Highway Type Vehicles | 2003-06-18 | |||
| SAE J 1911-2002 | Test Procedure for Air Reservoir Capacity--Highway Type Vehicles | 2002-08-23 | |||
| EN 474-8:2006+A1:2009 | Earth-moving machinery - Safety - Part 8: Requirements for graders | 2009-02-11 | |||
| SAE J 1911-1997 | Test Procedure for Air Reservoir Capacity--Highway Type Vehicles | 1997-05-01 | |||
| AIA/NAS NASM 91523-2002 | Knob, Control, Lever, Metal | 2002-04-01 | |||
| SAE J 1911-1990 | Test Procedure for Air Reservoir Capacity--Truck and Bus | 1990-09-01 | |||
| EN 14863:2005 | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers | 2005-12-07 | |||
| AIA/NAS NA 0052-1979 | Rivet - Solid, Universal Head, Monel, Metric | 1979-05-01 | |||
| EN 474-10:2006+A1:2009 | Earth-moving machinery - Safety - Part 10: Requirements for trenchers | 2009-02-11 | |||
| AIA/NAS NA 0054-1979 | Rivet - Solid, Countersunk 100 Degree Head, Monel, Metric | 1979-05-01 | |||
| 浙人大常(2015)15号 | 关于批准《杭州市生活垃圾管理条例》的决定 | 2015-07-30 | 2015-12-01 | ||
| EN 14866:2005 | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications | 2005-12-21 | |||
| EN 485-1:2008+A1:2009 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery | 2009-10-28 | 2016-07-27 | ||
| WS/T471-2015 | 寄生虫病诊断名词术语 | 2015-09-17 | 2016-02-01 | ||
| WS/T472-2015 | 口腔健康调查检查方法 | 2015-09-17 | 2016-02-01 | ||
| EN 485-1:1993 | Aluminium And Aluminium Alloys - Sheet, Strip And Plate - Technical Conditions For Inspection And Delivery | 1993-10-01 | 2008-03-01 | ||
| EN 15206:2007 | Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron | 2007-01-24 | |||
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements | 2009-12-02 | |||
| EN 15282:2007 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges | 2007-03-14 |
若您对上表中数据有任何疑问，请与网站联系。
