（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NA 0250-1990 | Bearing, Plain, Self Lubricating, Self-aligning Low Speed, Wide, Chamfered Outer Ring, -54 Degrees C To 163 Degrees C, Metric | 1990-03-16 | |||
| EN 500-3:2006+A1:2008 | Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines | 2008-10-22 | |||
| EN 756:2004 | Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification | 2004-03-03 | |||
| SAE AS 5966-2004 | Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, 90° Elbow to 90° Elbow | 2004-12-29 | |||
| EN 756:1995 | Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification | 1995-10-22 | |||
| SAE AMS 4241C-2007 | Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), Solution and Precipitation Heat Treated, Dendrite Arm Spacing (DAS) Controlled | 2007-04-24 | |||
| AIA/NAS NAM 14289-1998 | Strap, Retaining, Cushioned, Rectangular, Two-piece, Metric | 1998-12-01 | |||
| EN 500-6:2006+A1:2008 | Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers | 2008-10-08 | |||
| SAE AMS 4241B-2002 | Aluminum Alloy, Castings 7.0si 0.58mg 0.15ti 0.06be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (Das) Controlled | 2002-03-21 | |||
| ENV ISO 14253-2:2001 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999) | 2001-03-21 | |||
| SAE AMS 4241A-2000 | Aluminum Alloy Castings 7.0SI - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled | 2000-08-01 | |||
| 浙江省人民代表大会常务委员会公告第31号 | 浙江省旅游条例 | 2015-09-25 | 2016-01-01 | ||
| SAE AMS 4241-1991 | Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), Solution and Precipitation Heat Treated, Dendrite Arm Spacing (DAS) Controlled | 1991-10-01 | |||
| EN ISO 14253-2:2011/AC:2013 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013) | 2013-07-24 | |||
| ENV 500-6:1995 | Mobile Road Construction Machinery - Safety - Specific Requirements For Paverfinishers | 1995-12-15 | |||
| AIA/NAS NAM 14290-1999 | Clamp, Loop, Cushioned, Rectangular, Metric | 1999-04-01 | |||
| EN ISO 14534:2009 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002) | 2009-03-25 | |||
| EN 512:1994/A1:2001 | Fibre-cement products - Pressure pipes and joints | 2001-08-29 | |||
| EN ISO 14534:2002 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002) | 2002-06-15 | |||
| SAE J 1991-1999 | Standard of Purity for Use in Mobile Air-Conditioning Systems | 1999-02-01 | |||
| EN ISO 14534:1997 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:1997) | 1997-12-15 | |||
| SAE J 1991-1989 | Standard of Purity for Use in Mobile Air-Conditioning Systems | 1989-10-01 | |||
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) | 2015-01-28 | |||
| SAE J 1403-2014 | Vacuum Brake Hose(STABILIZED Sep 2014) | 2014-09-18 | |||
| EN 516:1995 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps | 1995-06-09 | 2006-01-11 | ||
| SAE J 2498-2004 | Minimum Performance of the Warning Light System Used on Emergency Vehicles | 2004-08-04 | |||
| SAE AMS 5627F-1998 | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings 17cr Annealed | 1998-11-20 | |||
| SAE J 2498-1999 | Minimum Performance of the Warning Light System Used on Emergency Vehicles | 1999-08-01 | |||
| EN 12052:2004 | Health informatics - Digital imaging - Communication, workflow and data management | 2004-08-18 | |||
| SAE AMS 5627E-1992 | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings 17Cr (SAE 51430) Annealed | 1992-07-01 | |||
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods | 2009-08-19 | |||
| AIA/NAS 1900-1997 Revision 4 | Rivet Blind - General Purpose, Bulbed, Self-plugging, Mechanically Locked - Spindle | 1997-10-31 | |||
| ENV 13939:2001 | Health informatics - Medical Data Interchange: HIS/RIS-PACS and HIS/RIS - Modality Interface | 2001-12-12 | |||
| SAE AMS 5627D-2011 | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings 17Cr (SAE 51430) Annealed | 2011-08-12 | |||
| ENV 12922-1:1997 | Medical Image Management - Part 1: Storage Commitment Service Class | 1997-11-19 | |||
| ENV 12623:1997 | Medical Informatics - Media Interchange in Medical Imaging Communications (MI-MEDICOM) | 1997-06-18 | |||
| SAE AS 15002B-2007 | Fitting, Lubrication, Hydraulic, Surface Check, Straight Threads, Steel, Type II | 2007-07-09 | |||
| ENV 12052:1997 | Medical Informatics - Medical Imaging Communication (MEDICOM) | 1997-10-22 | |||
| SAE AMS 2478D-1995 | Anodic Treatment of Magnesium Alloys Acid Type, Full Coat | 1995-02-01 | |||
| AIA/NAS 2055-2062-1991 | Pin-rivet, Grooved, Titanium (composite Applications) 100 Degrees Flush Head, Stump Type | 1991-06-01 | |||
| SAE AS 15002A-2005 | Fitting, Lubrication, Hydraulic, Surface Check, Straight Threads, Steel, Type II | 2005-08-18 | |||
| SAE AMS 2478C-2011 | Anodic Treatment of Magnesium Alloys Acid Type, Full Coat | 2011-08-10 | |||
| SAE AS 15002-2005 | Fitting, Lubricating, Hydraulic, Surface Check, Straight Threads, Steel, Type Ii | 2005-06-03 | |||
| SAE AS 18280/2-2004 | Sleeve, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi | 2004-07-08 | |||
| AIA/NAS 2105-2112（R2001） Revision 4 | Bolt - Lock, Tension, 100 Degree Head (ms 24694), Pull-type, Titanium Alloy | 2001-08-21 | |||
| EN ISO 14579:2001 | Hexalobular socket head cap screws (ISO 14579:2001) | 2001-09-01 | |||
| SAE AS 4074-1993 | Linear Token Passing Multiplex Data Bus | 1993-12-01 | |||
| SAE ARP 868B-1994 | Method - Pressure Drop Tests for Fuel System Components | 1994-09-01 | |||
| AIA/NAS 2115-2122-1973 | Bolt - Lock, Tension, 100 Degree Head (ms20426), Standard And Oversize, Pull-type, Titanium Alloy | 1973-07-01 | |||
| SAE ARP 868A-1983 | Method-Pressure Drop Tests for Fuel System Components | 1983-06-01 |
若您对上表中数据有任何疑问，请与网站联系。
