（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 88:1991 | Pressure governors for gas appliances for inlet pressures up to 200 mbar | 1991-06-12 | 2007-11-14 | ||
| EN 88:1991/A1:1996 | Pressure governors for gas appliances for inlet pressures up to 200 mbar | 1996-06-19 | |||
| SAE AS 81820/3D-2014 | BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F | 2014-07-11 | |||
| EN ISO 4016:2000 | Hexagon head bolts - Product grade C (ISO 4016:1999) | 2000-11-22 | |||
| EN 24016:1991 | Hexagon head bolts - Product grade C (ISO 4016:1988) | 1991-10-16 | |||
| SAE AS 81820/3B-2007 | Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring, -65° to 325°F | 2007-10-31 | |||
| AIA/NAS NASM 85353/2-1999（R2000） | Nut, Preload Locking, Extended Washer, Hexagon, Reduced Height, Cres, 125 Ksi, 450 Degrees F And 1200 Degrees F | 1999-12-01 | |||
| SAE AS 81820/3A-2003 | Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring, -65° to 325°F | 2003-08-11 | |||
| EN 12078:1998 | Zero governors for gas burners and gas burning appliances | 1998-08-19 | 2011-04-06 | ||
| SAE AS 81820/3-1998 | Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring, -65° to 325°F | 1998-04-01 | |||
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) | 2014-06-18 | |||
| EN 12067-1:1998 | Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types | 1998-10-21 | 2011-04-06 | ||
| SAE AIR 81B-2000 | Hydrocarbon-Based Hydraulic Fluid Properties | 2000-12-01 | |||
| AIA/NAS NASM 85449/2-2011 Revision 1 | Clamp Assembly, Saddle-Type, Cushioned, Epr Rubber, 321 Cres, 275 Degrees F, General Purpose | 2011-03-31 | |||
| SAE AIR 81A-1995 | Hydrocarbon-Based Hydraulic Fluid Properties | 1995-03-01 | |||
| EN 12067-1:1998/A1:2003 | Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types | 2003-04-23 | |||
| AIA/NAS NASM 85449/2-1998 | Clamp Assembly, Saddle-type, Cushioned, Epr Rubber, 321 Cres, 275 Degrees F, General Purpose | 1998-09-25 | |||
| EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water | 2015-05-13 | |||
| SAE J 581-2010 | Auxiliary High Beam Lamps | 2010-09-16 | |||
| SAE J 581-2004 | Auxiliary Upper Beam Lamps | 2004-07-15 | |||
| EN ISO 4018:2000 | Hexagon head screws - Product grade C (ISO 4018:1999) | 2000-11-22 | |||
| SAE J 581-1998 | Auxiliary High Beam Lamps | 1998-06-01 | |||
| EN 89:1999/A4:2006 | Gas-fired storage water heaters for the production of domestic hot water | 2006-11-15 | |||
| SAE J 581-1995 | Auxiliary Upper Beam Lamps | 1995-01-01 | |||
| EN 24018:1991 | Hexagon head screws - Product grade C (ISO 4018:1988) | 1991-10-16 | |||
| LB/T 045-2015 | 旅游演艺服务与管理规范 | 2015-07-27 | 2015-11-01 | ||
| SAE J 581-1989 | Auxiliary High Beam Lamps | 1989-06-01 | |||
| EN 89:1999/A3:2006 | Gas-fired storage water heaters for the production of domestic hot water | 2006-10-18 | |||
| AIA/NAS NASM 85449/3-2011 Revision 1 | Clamp Assembly, Saddle-Type, Cushioned, Silicone Rubber, Fabric Reinforced, 321 Cres, 500 Degrees F, General Purpose | 2011-03-31 | |||
| SAE J 581A-1979 | Auxiliary High Beam Lamps | 1979-03-01 | |||
| EN 89:1999/A2:2000 | Gas-fired storage water heaters for the production of domestic hot water | 2000-08-23 | |||
| AIA/NAS NASM 85449/3-1998 | Clamp Assembly, Saddle-type, Cushioned, Silicone Fabric, Reinforced 321 Cres, 500 Degrees F, General Purpose | 1998-09-25 | |||
| EN 89:1999/A1:1999 | Gas-fired storage water heaters for the production of domestic hot water | 1999-10-29 | |||
| EN ISO 8765:2000 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) | 2000-11-22 | |||
| LB/T 044-2015 | 自驾游管理服务规范 | 2015-07-27 | 2015-11-01 | ||
| EN 28765:1991 | Hexagon head bolts with fine pitch thread - Product grades A and B (ISO 8765:1988) | 1991-10-16 | |||
| AIA/NAS NASM 85449/4-2011 Revision 1 | Clamp Assembly, Saddle-Type, Cushioned, Ptfe, 321 Cres, -320 Degrees F To 450 Degrees F, General Purpose | 2011-03-31 | |||
| SAE AIR 1678A-2007 | Uncertainty of In-Flight Thrust Determination | 2007-06-11 | |||
| SAE AIR 1678-1992 | Uncertainty of In-Flight Thrust Determination | 1992-12-01 | |||
| AIA/NAS NASM 85449/4-1998 | Clamp Assembly, Saddle-type, Cushioned, Ptfe, 321 Cres, -320 Degrees F To 450 Degrees F, General Purpose | 1998-09-25 | |||
| 长春市人民代表大会常务委员会公告[十四届]第20号 | 长春市邮政条例 | 2014-12-19 | 2015-01-01 | ||
| EN 263:2002 | Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes | 2002-05-22 | 2008-02-27 | ||
| 长春市人民政府令第56号 | 长春市计划用水管理办法 | 2014-09-22 | 2014-11-01 | ||
| EN 10246-4:1999 | Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections | 1999-11-17 | |||
| EN 263:1987 | Specification for cast acrylic sheet for baths and shower trays for domestic purposes | 1987-06-30 | 2002-05-22 | ||
| AIA/NAS NASM 63540-2000 | Stud, Self-clinching - General Specification For | 2000-03-31 | |||
| EN 10246-5:1999 | Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections | 1999-11-17 | |||
| SAE J 947-2014 | Glossary of Fiberboard Terminology | 2014-01-23 | |||
| 长春市政府令第55号 | 长春市电子档案远程利用管理暂行办法 | 2014-07-23 | 2014-09-05 | ||
| EN 40-9:1982 | Lighting columns - Part 9: Special requirements for reinforced and prestressed concrete lighting columns | 1983-02-21 | 2005-12-07 |
若您对上表中数据有任何疑问，请与网站联系。
